Explorer Challenge May 2024
-
Day 13 of 30
Some whittling with Explorer

Only Tools Matters
-
Day 12:
No actual Explorer use, but I sharpened up a red Explorer that I haven’t carried in awhile to add to the Explorer carry rotation.

-
Day 13
I used the inline Phillips driver to remove the light kit on a ceiling fan so I could replace the 3 way pull chain switch that controls the fan. I really, really, really like the inline Phillips. I couldn't have done it with a backside Phillips as there wouldn't have been any room to turn it.
-
Another great day from awl, especially the "through the magnifier" shots!
I'm starting to see the value in that layer, and I'm thinking it would be really cool to mod into a Pioneer or a Tinker. -
Great stuff everyone.
@Alan K. said:
Day 13
I used the inline Phillips driver to remove the light kit on a ceiling fan so I could replace the 3 way pull chain switch that controls the fan. I really, really, really like the inline Phillips. I couldn't have done it with a backside Phillips as there wouldn't have been any room to turn it.This is the reason I don’t go with a tinker model. I just don’t think I’d get into as many uses compared wjth the Explorer.
@Antti Lammi said:
Day 13 of 30Some whittling with Explorer

Only Tools Matters
Looks great
@Jeffjeeptj said:
Getting ready to trim my mustache.[attach id=0 msg=2478019]
It’s no wonder we’ve had a couple mustache trim uses so far Vic scissors are wonderful for grooming.
Loving the cigar posts. I haven’t had time to sit down and enjoy one in a while so I’m living vicariously through you awl.
-
Day 12
Some blades use today to make lunch and trimmed my goatee a little bit.
[attach id=0 msg=2478183]
[attach id=1 msg=2478183]
Tools used:
Large blade x8
Can opener x4
Scissors x4
Small blade x4
Cap lifter x5
Toothpick x4
Tweezers x2
Philips x3
Mag lens x3
Awl x2
Hook x2

-
Day 13:
I used the flat diver to tighten the screw on a rotary tool cutoff wheel.

-
Day 14
I needed to install a new towel bar. Explorer opened the package.
[attach id=0 msg=2478208]
[attach id=1 msg=2478208]

-
Day 13:
Had to cut up some fresh air tubing for my AeroGarden.
[attach id=0 msg=2478253]

-
Day 14 of 30
Used blade to open noodle package.

Only Tools Matters
-
Day 13
A few uses so far today.
Made my lunch
[attach id=0 msg=2478317]
Played the lottery
[attach id=1 msg=2478317]
Stuffed some steel wool to fill a gap
[attach id=2 msg=2478317]
Also used both the toothpick and tweezers
Tools used:
Large blade x9
Can opener x5
Scissors x4
Small blade x4
Cap lifter x6
Toothpick x5
Tweezers x3
Philips x3
Mag lens x3
Awl x2
Hook x2


-
Day 14:
Found a dead bumble bee, and had to examine it through the newer style magnifier.
[attach id=0 msg=2478343]
[attach id=1 msg=2478343]

-
Day 14
No use today.

-
Wife and I are going on a road trip to the Ocean City Cruisin. She decided we needed new toothbrushes. I needed Explorer to open the package.
[attach id=0 msg=2478372]

-
Day 14:
No use yesterday, but my Explorers stand ready.

-
Day 15 of 30
Today used Explorer flathead to remove screwcaps on my cars doorpanel (handle was jammed)

Only Tools Matters
-
Lots of good stuff today! I have never used steel wool as a gap filler, but I'm now wondering what effect strawberries would have on a carbon steel blade. And I will have to remove a trim piece from my car's interior eventually. Getting new brakes is much more important.
-
Day 15
Halfway through the challenge and I used the large blade to cut my sandwich in half.

-
Day 14
Popsicles for kids, opening mail, and awl/hook to thread/pull some string through some cardboard armor for the kids.
[attach id=0 msg=2478509]
Still haven’t used the corkscrew.
Tools used:
Large blade x9
Can opener x5
Scissors x5
Small blade x5
Cap lifter x6
Toothpick x5
Tweezers x3
Philips x3
Mag lens x3
Awl x3
Hook x3
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
