What's your latest SAK?
-
I think you have scoped out the major features of the 108mm quite well. I really like the checkered grip. You might be surprised how much better the saw cuts than a regular SAK with a saw. I would cut on the pull, then push the saw back which would clear lots of the chips from the teeth and pull again. I have sawed some pretty good-sized things. The awl will cut a perfect hole in heavy plastic. Clean as a drill. Punch it through and turn. I fixed some lawn mower fittings with mine. It is also great for punching holes in light metal. Open the awl. Pound on the top of the GAK with your fist to drive it through.
People get tired of reading about my everyday carry. I am going to have to stop. Best wishes. G

-
@victor7000 said:
A big one ...How do you like it?
I’ve eyed those up a time or several, but they just seemed too heavy and too pricey for what they are, and I haven’t pulled the trigger.
-
@Tuisto said:
Unfortunately I can't find the saw cover on either of those sites.Gary is doubtless much more qualified than I am to say for sure, but the saw teeth cover looks like stamped sheet steel to me. (I've only seen them in photos.) If I'm right, I don't imagine making one would be too difficult.
-
I think you could make something, or you could always put a strip of duct tape over the saw. Not elegant but workable. Peel it off when you need to cut. Probably wind up needing the duct tape instead. Some kind of plastic tape might even be better. It will have to be thin. [attach id=0 msg=2478853]
There should have been a liner lock on these GAKs to begin with. At least on the saw. Best wishes. G
:D
-
You know what, that would actually solve two problems at once... Both the scraping against the liner and the not having the saw cover. I very very rarely say this but I think that one thing that would make this a much better knife would be if it were automatic. I'm not even sure if it could be customised to do that but perhaps somehow where sliding the whole scale down would activate the blade (see rudimentary photo below) like some of the Rainy Vallotton autos I've seen.

-
Are you going to have the blade spring open, or the saw? Do you like autos? My Dad picked up one somewhere and put it in a drawer and forgot about it. I would take it out and piddle with it now and then. I didn't really warm up to the whole auto thing. I must have been about 12 or so. Best wishes. G
;) -
Black Tinker.
-
Picked up this sweet Rambler off DLT.

-
@Tuisto said:
I very very rarely say this but I think that one thing that would make this a much better knife would be if it were automatic. I'm not even sure if it could be customised to do that...I'm sure it's possible, but you'd have to be a highly skilled engineer and "knife mechanic" to make it a reality.
@ThisAlarm7 said:
Picked up this sweet Rambler off DLT.That is indeed sweet. I'm tempted to get one in the distant future!
-
This one also arrived and luckily it did have a saw cover! Anyone have any ideas on how to get the bail off? And yes, some autos are nice although I'd never really carry them around. Many knives can be opened even faster. Has anyone on this site modded a SAK to make it auto?




-
Nice one, Mr. T. I will send along a chart so you can see all the variations for the 108mm. I never tried to take a bail off a SAK. Didn't you want to put a bail ON the olive drab one? The chart is one of SAAM's from a now defunct web site. Best wishes. G
:D
[attach id=0 msg=2478956].jpg)
-
Yes
I want to take the bail off of this one because it's not in great shape and perhaps put a different one on the Trooper -- maybe a shackle, but it would have to be a 1/8" one and those seem impossible to find :(. I will probably just put the saw cover on whichever SAK I'm carrying with me that day. -
You know if you try to spread the bail to take it off and you slip up.... I have taken bails off of boy scout type knives using pliers. They are usually just crimped on. A broken scale on the 108 would be just so sad. If you don't want to salvage it, the easy way is to cut the bail with a file or moto tool.
If the bail is just dinged up, it should be easy to clean it up with some file work and abrasive. Let us know how it goes. Best wishes. G

-
@Tuisto said:
This one also arrived and luckily it did have a saw cover! Anyone have any ideas on how to get the bail off?Those scales sure are spiffy! Are they stag? I'd leave the shackle alone unless it's bent. But if it has to go, follow Gary's advice and take a Dremel or similar to it. You could also use a jeweler's saw with a suitable blade.
@IMR4198 said:
The chart is one of SAAM's from a now defunct web site.Turns out my 108mm of choice would be a Pathfinder, but I'd be delighted with a Walther or a Mauser. The chart is very useful. Thanks for sharing it!

-
Shackle is probably not original? You figured that already, right? It looks like it might be plated steel, with part of the plating worn off. Is that what you meant by bad condition? Best wishes. G

-
No, I don't think they're real stag -- feel more like cheapish plastic. And yes, Mr. G, the bail is a bit worn and looks almost like there's some rust or gunk or something. It's also bent such that it doesn't do full rotations, only about 55°.
-
Hi Tuisto,
Real stag or not, I think they look good. Actually, a partial rotation of the bail isn't necessarily a bad thing. When a bail has full movement, they are very prone to being folded in the wrong direction when you close a blade. Or open one. I think most people who don't like the bails, see this as the reason for their dislike. Best wishes. Gary

-
That's a very good point. I think I may keep this one, then, since I'm starting to like it more and more with the bail. But I think I like the Trooper much more due to its grip and thinness. I'd love to pick up a Mauser or Walther if I can find one at a decent price. One really bizarre thing about this fake stag Hunter is that the saw-guard on this one doesn't seem to fit the saw on the Trooper... I wonder if they were manufactured differently? Or at such different times that the sizes changed somewhat?
-
Well, it looks like you are a Full Member now, Tuisto. Congratulations on your third threaded fastener. Next stop will be what..... Sr. Member I think. Then on to Hero Member. I would have liked to stay at Hero Member. Sounds better than No Life.
Best wishes. Gary

-
I was looking to get a rambler for the philips/opener tool over the classic sd..
Came across the Manager which was essentially the Rambler + Pen, so works fine for me..Here's a quick look..

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login