What's your latest SAK?
-
Picked up this sweet Rambler off DLT.

-
@Tuisto said:
I very very rarely say this but I think that one thing that would make this a much better knife would be if it were automatic. I'm not even sure if it could be customised to do that...I'm sure it's possible, but you'd have to be a highly skilled engineer and "knife mechanic" to make it a reality.
@ThisAlarm7 said:
Picked up this sweet Rambler off DLT.That is indeed sweet. I'm tempted to get one in the distant future!
-
This one also arrived and luckily it did have a saw cover! Anyone have any ideas on how to get the bail off? And yes, some autos are nice although I'd never really carry them around. Many knives can be opened even faster. Has anyone on this site modded a SAK to make it auto?




-
Nice one, Mr. T. I will send along a chart so you can see all the variations for the 108mm. I never tried to take a bail off a SAK. Didn't you want to put a bail ON the olive drab one? The chart is one of SAAM's from a now defunct web site. Best wishes. G
:D
[attach id=0 msg=2478956].jpg)
-
Yes
I want to take the bail off of this one because it's not in great shape and perhaps put a different one on the Trooper -- maybe a shackle, but it would have to be a 1/8" one and those seem impossible to find :(. I will probably just put the saw cover on whichever SAK I'm carrying with me that day. -
You know if you try to spread the bail to take it off and you slip up.... I have taken bails off of boy scout type knives using pliers. They are usually just crimped on. A broken scale on the 108 would be just so sad. If you don't want to salvage it, the easy way is to cut the bail with a file or moto tool.
If the bail is just dinged up, it should be easy to clean it up with some file work and abrasive. Let us know how it goes. Best wishes. G

-
@Tuisto said:
This one also arrived and luckily it did have a saw cover! Anyone have any ideas on how to get the bail off?Those scales sure are spiffy! Are they stag? I'd leave the shackle alone unless it's bent. But if it has to go, follow Gary's advice and take a Dremel or similar to it. You could also use a jeweler's saw with a suitable blade.
@IMR4198 said:
The chart is one of SAAM's from a now defunct web site.Turns out my 108mm of choice would be a Pathfinder, but I'd be delighted with a Walther or a Mauser. The chart is very useful. Thanks for sharing it!

-
Shackle is probably not original? You figured that already, right? It looks like it might be plated steel, with part of the plating worn off. Is that what you meant by bad condition? Best wishes. G

-
No, I don't think they're real stag -- feel more like cheapish plastic. And yes, Mr. G, the bail is a bit worn and looks almost like there's some rust or gunk or something. It's also bent such that it doesn't do full rotations, only about 55°.
-
Hi Tuisto,
Real stag or not, I think they look good. Actually, a partial rotation of the bail isn't necessarily a bad thing. When a bail has full movement, they are very prone to being folded in the wrong direction when you close a blade. Or open one. I think most people who don't like the bails, see this as the reason for their dislike. Best wishes. Gary

-
That's a very good point. I think I may keep this one, then, since I'm starting to like it more and more with the bail. But I think I like the Trooper much more due to its grip and thinness. I'd love to pick up a Mauser or Walther if I can find one at a decent price. One really bizarre thing about this fake stag Hunter is that the saw-guard on this one doesn't seem to fit the saw on the Trooper... I wonder if they were manufactured differently? Or at such different times that the sizes changed somewhat?
-
Well, it looks like you are a Full Member now, Tuisto. Congratulations on your third threaded fastener. Next stop will be what..... Sr. Member I think. Then on to Hero Member. I would have liked to stay at Hero Member. Sounds better than No Life.
Best wishes. Gary

-
I was looking to get a rambler for the philips/opener tool over the classic sd..
Came across the Manager which was essentially the Rambler + Pen, so works fine for me..Here's a quick look..

-
Three 58s: chromed stamped steel Diplomat (I really like the names like Diplomat, Broker etc), brushed stainless steel and leather Coach!
Thanks to AzteCypher for his kind support to acquire them!The leather scales are in very good shape but the knife itself is not - there is a broken spring (you can see the file does not close) so I decided to remove the scales and put them to another classic.
The removal was easy - like any other celidor scales. To my surprise, there are toothpick and tweezers embedded in them!
But after further consideration it makes sense that they were left in - without them there would the opening for the T&T heads and the thin leather would sink in them.
The pin holes in the scales seem to be rather worn - look like the scales were already removed in the past, I do not know what the previous owner(s) did to them. But still look usable - I will try the trick with kitchen foil for reinstalling - I would rather avoid using glue.

Sent from my iPhone using Tapatalk
-
I thought the red one was just a rather worn cellidor. Then I saw it was covered with thin red leather. Let us know how the foil trick works. Nice ones. Best wishes. Gary
-
@z1913 said:
Three 58s: chromed stamped steel Diplomat (I really like the names like Diplomat, Broker etc), brushed stainless steel and leather Coach!
Thanks to AzteCypher for his kind support to acquire them!The leather scales are in very good shape but the knife itself is not - there is a broken spring (you can see the file does not close) so I decided to remove the scales and put them to another classic.
The removal was easy - like any other celidor scales. To my surprise, there are toothpick and tweezers embedded in them!
But after further consideration it makes sense that they were left in - without them there would the opening for the T&T heads and the thin leather would sink in them.
The pin holes in the scales seem to be rather worn - look like the scales were already removed in the past, I do not know what the previous owner(s) did to them. But still look usable - I will try the trick with kitchen foil for reinstalling - I would rather avoid using glue.

Sent from my iPhone using Tapatalk
.
What is the foil trick?
-
There was a post (but I can't find it now), where somebody put small piece of kitchen plastic foil on the pins because the pin holes in the scales were already worn/too wide from multiple reinstallation so the scales were too loose and the foil served as washer/plug so no glue was needed. I will post pictures once done.
-
Those scales are indeed in great shape. Congratulations, and
to AzteCypher for helping them get to you! -
Here's a new addition to the club. By far the oldest model I own. I can't actually physically open the can opener. I got it open once but then almost pulled my nail off attempting it again. I play bass so I have to keep my fingernails super short and it can be a hassle sometimes to open some stickier models. I'll put some mineral oil in it and try again in a bit. Or maybe throw it into the freezer for a few minutes. I think this is from the last year these were produced, since they started with a new model in '51. I really like the clip point blade on this thing and I really really like the awl and screwdriver/cap lifter. And it came with a pouch, but I'm not sure it's original.




-
Those can openers are notoriously tough. Looks like someone whittled on the handle a little to allow a little better purchase on the opener stud. Nice one. Best wishes. G

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login