Argument at Zuckercorp
-
Oh dear. One of the reasons I’m not on Facebook anymore to be fair. Was in a few groups but people get very passionate which is great. It’s when it comes with anger
-
@Antti Lammi said:
There is time and place for both tools.Charge has better blade steel, its smaller than SwissTool, has Diamond file and Bit Drivers, replaceable cutters, needle nose pliers, Serrated blade (all SwissTool models doesnt have it)
SwissTool is larger pliers, all tools accessibility on outside, better scissors ( all models doesnt have scissors), combotool, stronger flatheads what can be used on prying (not recommended), Awl.
**Also maybe one of most important thing that SwissTool has over Charge, it doesnt bite you when squeezing
**

Only Tools Matters
This, more than any other reason, is why I no longer own a Wave (or any other LM with the same design). Literally bit me twice so hard to give me a massive blood blister. Despite the reputation I've never managed that with any Gerber or Vic.
However my preferences in no way invalid or supersede anyone else's.
-
I can only parrot the sentiment already said. both have their place, their positives and negatives. all I can say is that I'm sorry I missed the G10 Charges
-
@G-Dizzle said:
I trust Leatherman more in adverse contions because the tools are easier to open. The nail nicks on my Victorinox Spirit can be difficult. I think the tight tolerances actually hurt it in that respect. In an office environment it is fine, just don’t want to get in a position when I can’t open the tool I want in the cold/rain/etc.Other than that, the fit and finish and quality on the Vic is better than leatherman, and I like the tools as much or better. I think the vic is a better tool overall. Just can be hard to open at times.
This is interesting, and different than my experience. I find the spirit's tools easier to open, with the possible exception of LM's OHO blades (I've not yet tried one of the OHO spirit models). Every LM I've had, the inside tools were nail breakers to open. I also did not like the regular swisstool as it was hard to get to the nail nicks. The spirit's curved handles addresses that issue for me.
Glad we all have different options available to suit our needs!
-
Perhaps I was an odd exception to the rule, but I carried several different PB multis and SAKs during my two deployments, and I never had any issues with corrosion. All those tools were exposed to salty ocean air. On the other hand, a feeler gauge in the Power Plants shop rusted pretty badly, and had to be replaced. I don't think it ever saw any use.
-
@Farmer X said:
Perhaps I was an odd exception to the rule, but I carried several different PB multis and SAKs during my two deployments, and I never had any issues with corrosion. All those tools were exposed to salty ocean air. On the other hand, a feeler gauge in the Power Plants shop rusted pretty badly, and had to be replaced. I don't think it ever saw any use.There must be a lot of variability in LM tools. I now have a couple I use in all sorts of conditions wet, sweat, mud, and grease, and do not clean them really ever… no rust.
-
I've never had any rust on any of my Leatherman's' and I've carried one since the early 1990's.
-
@gustophersmob said:
This is interesting, and different than my experience. I find the spirit's tools easier to open, with the possible exception of LM's OHO blades (I've not yet tried one of the OHO spirit models). Every LM I've had, the inside tools were nail breakers to open. I also did not like the regular swisstool as it was hard to get to the nail nicks. The spirit's curved handles addresses that issue for me.Glad we all have different options available to suit our needs!
It could be my tool specifically, or that it doesn’t get enough use. It did not use to be like this, it got tighter over time. May need a good cleaning, although I have oiled it multiple times trying to help it.
-
Just about every Leatherman I have owned has developed rust- normally just small spots, but one went really badly.

/topic/37952
Def
-
Must just be the poutine because I don't drink coffee!
I make up for it with twice as much poutine though....
Def
-
@SteveC said:
I've never had any rust on any of my Leatherman's' and I've carried one since the early 1990's.My original Leatherman Supertool from the 90s is great. it's been used hard. I've left it out in the rain, it lives in a drafty uninsulated garage, it's rarely oiled..and not a speck or rust on it. I wish current LMs were like that..
It could be worse though.. it could be a Gerber.
-
I've never had a significant rust problem with LM, nor do I find the Vic Spirit particularly slippy when wet. :D
-
Comparison photos incoming
1




-
2




-
3




-
4


-
The Charge is much thicker/chunkier than the Wave and the Victorinox Spirit X.
The pliers on the two leatherman models both open significantly wider than the Vic. The Vic’s pliers have a positive “click” upon opening and are free moving. Opening both Leatherman pliers feel mushy and require a bit of effort to open and close once deployed.
The Charge blade is s30v and OHO, so is more premium than the Vic and Rebar. There is nothing wrong with either the vic or rebar blades, however. They will both be easier to sharpen than the Charge. Since the rebar is a closed construction, you will have to use the blades with the tool half open to take full advantage of the blade length.
The Charge serrated blade has a gut hook/seatbelt cutter. The Rebar is a standard sheepsfoot serrated blade. This Vic does not have a serrated blade. You can get models that do. I personally enjoy a serrated blade, but I know many people don’t care for them. A Spyderco Sharpmaker is the best way that I have found to sharpen serrations.
The saws on all three models are serviceable. The Vic saw feels a little smaller in use, but is a Victorinox saw. It will have great bite.
The Charge file is diamond on one side and cut on the other. The diamond portion is a nice touch. The cut portion does not seem as sharp as either the Vic or the Rebar, possibly from use. The Rebar has the most aggressive file on the flat sides. The Victorinox has the more agressive sawing edge. However, the Vic’s file is thicker, meaning that the rebar may still do a better job of “sawing” with the file.
Drivers: The Charge has a large and small bit driver and a thin/wide flat head. The Rebar and Vic have dedicated drivers. I have found that dedicated phillips and flat head drivers are far superior than a bit driver, IF the screws that you are working with fit. The leatherman adds more versatility if you carry a bit kit. If not, the Vic/Rebar drivers are better. Between the two, the rebar may grab better because it is less polished, but the Vic drivers are great.
Prying: Vic wins with the extremely thick bottle opener. The Rebar/Charge are serviceable
Can openers: they are all fine. They open cans. The leatherman offerings incorporate a wire stripper, but the Vic has an answer for that coming later.
Scissors: The rebar has none. The Vic scissors do not open very wide, but cut well. They are somewhat small. The Charge scissors open as wide as you would like, but are also small.
Awl: the Vic awl incorporates a hook but has no sewing hole. The Rebar awl has no hook but has a sewing hole. I think I would take the sewing hole over the hook if given the choice. The Vic awl is thinner than the Rebar. The Charge does not have an awl.
Vic’s extra cutting tool: Victorinox incorporated a chisel/box opener, wire stripper into the Spirit model. This is a great tool for all the things you don’t want to use your blade on. This is executed very well and is way better than the wire stripper on the leatherman models IMO.
The Charge has a little rust, but it doesn’t really bother me. It’s a tool.
Overall, I think the Vic is the highest quality tool with the best design and most functional implements, the Charge is the most convenient tool with the best materials, and the Rebar is the most rugged tool. If the Rebar had scissors, it would be a candidate for best multitool on the market in my opinion. I like the closed design, but others will not. I normally carry a dedicated OHO folder, so I don’t feel like my MT has to have one. If I did not, I would feel otherwise. I also feel that the Rebar is the most forgiving as far as opening the smaller tools. I haven’t had it stick on me to my memory.
All three are great tools, and I could carry any of them as my primary MT and be fine. If I were carrying just a MT and no other knife, it would be the Charge. When I want to carry a premium MT with arguably the most functional implements, it would be the Victorinox Spirit X. When I want simplicity and the enclosed feature, I carry the Rebar.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




