Custom 91mm Tension Problems
-
Hello,
I modded some random implements from other disassembled tools (reused the correct liners and back springs) but I didn’t use brass rods to “re-assemble”. Against everyone’s advice, I wanted to make it easily changeable, so I used M2 screws instead. I chose M2 just so I wouldn’t have to ream out the implements, liners and back springs out of laziness. I have the tool assembled now and my clearances look ok, all the tools open and close (slightly variable between layers). Could the extra slop from the 2.5mm holes vs the 2mm screw be causing my headache? Is there something else I’m totally missing?
Thank you,
-
You didn't mention what problems specifically you were having but I'm thinking perhaps the tools are snapping open or closed. If that's the case, I would say that little bit of slop is probably contributing to it.
-
0.5mm slop at each pivot and then 0.2mm slop for the middle pins would definitely causes issues with tension. I've made liners before and messed up in drilling one of the holes by less than 0.5mm and it caused issues.
-
Yep they are pretty fussy on those things for spring tension unfortunately.
-
Thanks everyone! I read somewhere that if the whole in the liner was too large it could cause tension issues. Getting M3 screws as pivots is the next step, to at least check that variable.
Thank you!
-
In my experience slop on one pivot is usually passable, like putting a 93mm awl in place of the small blade. But as others have said the middle pins are pretty touchy and can easily kill the overall tension of the spring.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login