Sad SAK Saturday
-
-
I'm sure a lot of the guys are having sympathy with you for having to carry such a worn-out old plug. Welcome to the show anyway. I suppose 'sad condition' really is a relative thing. I am afraid that friend Aztec might overwhelm us with clunkers, dogs, and wrecks once he gets started. Maybe some of the others.
Meanwhile that old cross just might take the prize for the prettiest 'Sad SAK' so far. Best wishes. G

-
It must be Saturday somewhere. Thinking about all our friends farther to the east of the US. I think I will kick off the very first Sad SAK Saturday. This is the 'good side' of a sad 58mm. I found it lying on a secondary road. The school bus comes this way and for some reason I thought it might have been tossed from a bus. No scale tools. Sort of squished together. Probably from being under a tire of some sort. Don't ask me why I kept it. I don't know.
Best wishes. G

[attach id=0 msg=2492924]
-
-
I will have to show the flip side some time. The tools still open, but like I said, it has been flattened out somewhat. Do you remember the day when you were a kid? I would pick up stuff and carry it around. All my friends would want to see it even if it were a piece of trash. Maybe some didn't grow up in that world.
I don't remember why I came to the conclusion that the little clunker was tossed from the school bus. The well-worn and busted knife that friend bruto showed is still a very usable pocketknife. Not pretty, for sure. Still could be a user. Then there was the lovely OC belonging to friend knifecoop. Just beginning to show the tiniest bit of wear around the edges. Same sort of utility. The only difference is.... with the OC, you could show it off. The first example, maybe you don't.
There are more knife appreciators in this group than the usual. Most of them wouldn't pry open something with a blade and bend it or break it. The general knife carrying public just might. There are lots of those sorts of knives in flea markets and in sale lots on the net. I wonder just how many MTO knife buffs are really buying them? Best wishes. G

-
-
My wife had this from an old boy friend when we met. Its scales led a rough life. Anyone recognize the tang stamps, is this just a cheap clone of a Spartan? Between the brass liners, pinned scales and the old style awl, it could be older than I think?
[attach id=0 msg=2493056]
[attach id=1 msg=2493056]


-
-
-
It is still Saturday here so ... I think this qualifies: cracked scales, missing shield, scale tools and lanyard ring; the real deal is the broken file's spring ... I did polished the scales for it to look good though. [attach id=0 msg=2493071]

-
-
Indeed there will be!
Tatty Rally has made a few appearances at MTo. It came to me as part of an eBay lot, for which I paid $1.65 per out-the-door. The dingy white scales with worn print aren't appealing, but the really sad part is the blade. It wouldn't even cut paper, and my unskilled sharpening job didn't help. Eventually it'll go off for a new blade and maybe new scales (if Victorinox's repair department keeps other than standard red on hand).
[attach id=0 msg=2493091]

-
Apologies, posting late as I was helping some friends install motor mounts on their car. I learned two things this weekend.
[list type=decimal]
-
How to install motor mounts on a 2011 Kia Optima.
-
I might be starting to get too old to be rolling around under a car without a nice soft mat to cushion me.
One of my sadder SAKs. These are the only two tools I could open without breaking out some pliers or another SAK to assist This used to be a Wenger Traveler. I think a good cleaning, oiling, sharpening, and a donor scale will bring it back to life.

-
-
-
It is Sad SAK Saturday again. Sad SAKs don't really have to remain that way. I will show one that I snatched from the Green Ripper and brought back to life.
This one had a bunch of problems. No scale tools (which always makes a SAK look haggard.) Big blade was bent and scuffed. Screwdriver tip on can opener was twisted. Someone did lots of prying with this one. Scales were scuffed and had a large cut in them. The cut went up one scale and even cut through the little metal inlay. Scales were loose and the whole knife was dirty.
Rehab included sanding the scale so the cut is much less obvious. I hand straightened the kink in the big blade. A little metal polish here and there and a good clean and oil. Scales were glued to remove the rattle and polished. New scale tools. The knife looks pretty good now. No longer sad. I have a couple of after photos. Best wishes. G
[attach id=0 msg=2494000] [attach id=1 msg=2494000]

-

Nice refurb job there!!!
One of these will donate the can opener to a Climber, and the small blade to an Explorer.
[attach id=0 msg=2494009]
-
-
-
You must be in a damp/maritime climate. There have been quite a few Leatherman multis on here with the rusties in various stages. I like to use a stainless-steel rotary brush in a Moto-tool to whisk away the corrosion. So far I haven't had rust problems with any Leatherman, and this is generally speaking, a damp climate. Best wishes. G

-
Two sad SAKs right here. One of them was a real nail breaker.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


It deserves a better life than the previous owner(s) gave it.