Any Jeepers out there?
-
@Grant Lamontagne said:
so I'll buy the part and** let the garage do it.**That's my repair philosophy these days, the engine bay of both my wagons are so crammed I can't even begin to get my hands in anywhere to do much at all, so I don't.
Back when I was younger, more enthusiastic (and most importantly, much poorer) I used to do everything myself, including axle replacement, engine swap, even replaced the big end on a motorbike in someone's carport in the middle of a big tour around Oz). No longer (and I'm fine with that). I do all my own car detailing these days, so my cars do get some attention from me.
-
Excepting those tasks that require specialized tools and/or knowledge, I prefer to do vehicular maintenance myself. Things don't always work out that way, mostly due my living on a rinky-dink lot and not having much secure space to store tools.
Home repair, on the other hand...that's something I'm not fond of doing myself. I only go the DIY route because I lack the money to hire a contractor (a new roof being a notable exception to that rule).
-
Lol

JR
-
Tactical assault jack?
Def
-
Here's a question for you Jeepers, particularly those in the rust belt. I've given some thought to building the ultimate Michigan-Mobile. The perfect start would likely be a YJ Wrangler with the 4.0 and a 5-speed. Of course, one requirement would be a fiberglass body. Have any of y'awl put a fiberglass body on a Jeep, and if so, how bad a job was it?
-
Hey jeepers, the kid went to a comic show and well he took a few pics of something interesting of this category..
JR
-
Nice. DerekMac was going to go all Jurassic Park with his Jeep, but I think he ended up going a different way with it.
Def
-
Sure, I could have started a new thread, but this one was already here, and resurrecting old threads is still a thing.
Anyway, I ran across a TJ on eBay Motors:
Either this is the deal of the millennium, the seller priced it lower than he intended to, or he's not revealing a serious flaw (and I'm talking worse than the bubbling under the rear license plate). Given the vehicle history shows it is a Northeastern Jeep and that the seller won't provide undercarriage photos, I'd suspect the last. What do Def and the rest of the Jeepers think?
-
I don't know what they go for in your neck of the woods, but that is a decent but not unheard of price for one here.
If I had the $$ and was in the market I'd pay that for it. I'd check the frame as they are usually the first thing to go on TJ's (that's why mine isn't running) but the 4.0 is as solid as engines get.
Def
-
The last TJ on the local Craigslist that I paid much attention to was cheap (less than $5,000). Of course, it had a rotted frame and a 4-cylinder. Maybe the one I found is decent enough, aside from the Sahara interior. I'd definitely get it inspected by someone I trusted before buying.
-
You absolutely should get things inspected by someone who knows....
But there's less to worry about on a TJ/YJ/CJ than there is on most vehicles, and repairs tend to cost a lot less than they do on other vehicles as well since most things are easily accessible.
Once they switched to the JK in 2007 things started to get like every other car, where the engine bay is stuffed with things, and components like starters and air filters aren't as easily accessible.
Unless something goes significantly wrong with the engine or transmission, everything else on the TJ is pretty easy to fix or replace with little more than basic hand tools. A few wrenches, a socket set and some Torx bits and you are pretty good on a TJ.
And there's not much that went wrong with the 4.0L inline six that was in Jeeps for many, many years leading up to the 3.8L in the JK. The 3.8L was so bad it only lasted a few years and part way through 2011 they started putting in the 3.6L Pentastar engine that I have. It has made the JD Power & Associates Top Ten Engines list almost every year since it was introduced- I have nothing against the 3.6L Pentastar, but it still can't hold a candle to the old 4.0L.
I have never heard of a catastrophic failure rendering a 4.0L worthless. I'm sure that it has happened, but I've never heard of it, nor seen it on Youtube or anywhere else.
The issue with a TJ is that you really don't want to take it on long trips. The short wheelbase and heavily sprung suspension means that it will beat the living smurf out of you every time you drive it, and the longer you have to go, the more pain you will be in when you arrive. I drove mine from Halifax to Portland, Maine years ago and I swear, I am still feeling it to this day! :ahhh
/topic/6802
It is also geared for the low end, so it struggles to maintain highway speeds for any length of time. And, if you need to pass a transport truck or something, be ready to down shift from fifth to third to have a chance, especially if there's an incline.
Of course, it's a pig on gas to begin with, and running at 70mph in third gear isn't helping.... :ahhh
Lastly, everyone loves Jeeps and that can be both a good thing and a bad thing. Always leave a little extra time whenever you go anywhere because more often than not, someone is going to want to talk to you about it.
It always starts with "What year is your Jeep?" or "What do you think of your Jeep?" or "Are Jeeps as hard on gas as everyone says?"
This will invariably lead to a lengthy conversation as they tell you about their friend's/Uncle's/ex's Jeep and how much fun they had in it, how much they always wanted a Jeep but never did because of family or cost or whatever.
The up side to that is you get built in, permanent free roadside assistance. No matter where you are or what the problem is, chances are another Jeep person will stop and help you out. And if they can't help, they will keep you company until another Jeep person stops to help. And if you are out in the woods somewhere and get stuck, there are Jeep groups everywhere- just post your location on one of them (probably on FB or something) and within a few hours there will be a dozen other Jeeps there, some pulling you out, some equipped to repair any damage, and some to fire up the barbecue and smoke dope.
Owning a Jeep really is like absolutely nothing else.
Def
-
@Grant Lamontagne said:
You absolutely should get things inspected by someone who knows....And doesn't plan on buying one himself. I took on that job for a Navy buddy after we got back from WESTPAC 2003-2004. We went to look at one YJ, and I told him it was not a wise purchase. He listened to me.
The more I look at that TJ, the more I see money going out. There are repairs to be done, and that Sahara interior would have to go.
-
Other than being two tone, that looks just like the interior in my TJ Sport?
What don't you like about it? If you want the plain steel dash then you need to get a YJ or CJ.
Def
-
I find the green upholstery extremely unappealing. So I'd have to do something about the front seats. The rear seat would likely be removed. And the position of the smaller gouges isn't ideal for me, but I think I'd just have to live with that.
Truthfully, since I think leaf spring suspensions seem to be more resistant to rust that coils, I'd probably be better off with a YJ if I want a Jeep to build (rather than restore).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login