Leatherman Signal challenge: October 2024
-
Yes, the Signal is definitely a niche sort of a tool. I doubt I'll be doing any camping, but I look forward to testing out the Signal just the same.
Day 2
The can/bottle opener is one of those things I'm really looking forward to using.
[attach id=0 msg=2498882]

-
Day 2
With the more limited toolset of the Signal, I decided to not carry my dedicated folder during the challenge. Part of the reason is due to the one hand opening of the outside blade. Second is to use the Signal as much as possible during the challenge. Third is to see how often I will need to touch up the blade. So far, I have used the blade to open mail and opening some packages in the kitchen. Today, I will be getting some packages in so there will be some cardboard to break down. I will try and get some action shots.
JonesE
-
Day2:
Went for a walk with the "low vis" option today
[attach id=0 msg=2498934]

-
@m47mu74nt said:
Day2:
Went for a walk with the "low vis" option today
[attach id=0 msg=2498934]
Nice pic
@Cypren said:
No picture, but I got some more use of the Signal tonight putting together a piece of IKEA furniture. Turns out that hammer end is fantastic for pounding in those annoying wooden press-pegs.Good use. The hammer end isn’t going to replace a regular hammer if that is what you need, but it does have its uses. I’ve found the hammer works good with a fix blade for battening sticks
-
Day 2
Not much going on, other than routing the wires and prepping zip ties on the new workstation. [attach id=0 msg=2498942]

-
Day 2
The obligatory "open a box from Leatherman with a Leatherman" pic. (It's just bits for a project tomorrow)

-
Day 2
Opened a box with some dog supplies
-
Mmmm... beef jerky.
I wonder what beef jerky for dogs tastes like. 
-
Day 2
Pulling and popping staples out of lumber from Home Depot. The basement stairs in the new house aren’t really properly reinforced and the movers were a little freaked out about it when carrying some heavy items down there. Seems like a good candidate for a fix and fortunately not too hard even without most of my power tools, which don’t get here until next week.
[attach id=0 msg=2498995]

-
More great stuff for today, y'awl!

Day 3
I put the opener to use on a bottle last night. It works so well that the cap was off before I could get an action shot. :D
[attach id=0 msg=2499042]

-
Day 3
So yesterday, I did use the Signal to break down boxes that came in. In total I broke down about five or so. The Signal performed admirably. Some quick observations was that I did experience some hot spots on my hand after the five boxes I broke down. I did get pinched once by the carabiner opening. I would say, if you are doing a lot of cutting wear some gloves. After the boxes were broken down, I did a Quick Look at the edge and it held up well. Edge was still sharp and would have handled more use before a touch up. Did get quite a bit of tape residue on the blade which was expected. I didn’t see any chipping. More to come.
JonesE
-
Day 3
Time for an easy "mod".
I'll never need a ferro rod or signal whistle during my normal life. Also, as much as I like and use Leatherman diamond-coated files, the one on the Signal is too small for regular use. I picked up some replacement parts from Etsy for those 2 tools that hold extra bits and a Vic tweezer.
Here's the kit:

Here's the parts with the bits they will hold:


Here's where the tweezers go:


It came with a thumb stud too. I don't normally like them, but I'll give it a try:

The final product:


-
Day 3:
"High vis" with a homemade Lego firefighter 4x4, based on the yellow Land-rover Defender model from Lego Creator (only stickers, wheels and a few other pièces are still from the original model)[attach id=0 msg=2499058]

-
Nice and quick mod Rich. I find it makes the Signal more urban friendly.
JonesE
-
Day 3
Decommissioning and, scavenging of salvageable parts from an old, curbside bike. Sadly, the bit/tweezer holder got out of commission as the pliers loosened grip and the top-mount bit holder slammed onto it, breaking off the tip that held it on the handle's cutout and rendered it "unclipable"; you win some, you loose some. I'll see what can be done to salvage it. [attach id=0 msg=2499080]

-
Nice and quick mod Rich. I find it makes the Signal more urban friendly.
100%, and sleeker looking too! -
@m47mu74nt said:
Day 3:
"High vis" with a homemade Lego firefighter 4x4, based on the yellow Land-rover Defender model from Lego Creator (only stickers, wheels and a few other pièces are still from the original model)[attach id=0 msg=2499058]
Don't know which I like more, the Rover or the Signal! :ahhh

-
Day 3
Boxes. So much the boxes.
[attach id=0 msg=2499107]

-
So yesterday, I did use the Signal to break down boxes that came in. In total I broke down about five or so. The Signal performed admirably. Some quick observations was that I did experience some hot spots on my hand after the five boxes I broke down. I did get pinched once by the carabiner opening. I would say, if you are doing a lot of cutting wear some gloves. After the boxes were broken down, I did a Quick Look at the edge and it held up well. Edge was still sharp and would have handled more use before a touch up. Did get quite a bit of tape residue on the blade which was expected. I didn’t see any chipping. More to come.
JonesE
Boxes can take their toll on a blade
Time for an easy "mod".
I'll never need a ferro rod or signal whistle during my normal life. Also, as much as I like and use Leatherman diamond-coated files, the one on the Signal is too small for regular use. I picked up some replacement parts from Etsy for those 2 tools that hold extra bits and a Vic tweezer.
Here's the kit:

Here's the parts with the bits they will hold:


Here's where the tweezers go:


It came with a thumb stud too. I don't normally like them, but I'll give it a try:

The final product:


I have one on its way to use in place of the sharpener. Still debating on the one for the whoste/ferro rod because I sometimes use the ferro rod for making coffee just for fun.
@Juan el Boricua said:
Day 3Decommissioning and, scavenging of salvageable parts from an old, curbside bike. Sadly, the bit/tweezer holder got out of commission as the pliers loosened grip and the top-mount bit holder slammed onto it, breaking off the tip that held it on the handle's cutout and rendered it "unclipable"; you win some, you loose some. I'll see what can be done to salvage it. [attach id=0 msg=2499080]
Sounds like a challenging day for the Signal
@m47mu74nt said:
Day 3:
"High vis" with a homemade Lego firefighter 4x4, based on the yellow Land-rover Defender model from Lego Creator (only stickers, wheels and a few other pièces are still from the original model)[attach id=0 msg=2499058]
Very cute Lego truck
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


100%