Leatherman Signal challenge: October 2024
-
-
Day 8
I learned that the Signal's wire cutters aren't enough to cut through thin chain links. (At least, not with my grip strength, anyway.)
Oh well, it can still be used as a pull handle.
[attach id=0 msg=2499731]

-
Day 8
My replacements for the whistle/ferro rod ans sharpener arrived. No between the Signal and my Zippo LM bit insert, I can carry 9 bits.

-
Very cool sos24. Really dig the Irish Blessing bit holder.
JonesE
-

I have been following along, reading each post, enjoying every photo
And, I so glad that I did NOT yield to temptation and purchase a SIGNAL. I will admit, I was so tempted to acquire a SIGNAL, yet, my first stumbling point was. Which color/combo color.
I liked the Aqua, Guava, and Topo. And of course a sexy Coyote Tan.
But, still like the same 4.
However, missing the start of October, I then thought I would read and learn. What I have learned, is the SIGNAL is a Skeletool on steroids with neat little additional gadgets.
And that the tool has gained some 3rd party options to modify the tool for a Suburban usefulness.
So at the point I admire each of you for utilizing this tool, and I’m pleased I did not order one. As I know now it is not a tool I would appreciate with my current lifestyle in this final stretch.
Keep up the great pictures and utilization of your signals.

-
Day 9
The Signal helped out on a project I have been putting off for the past couple of months. When my wife and I built our offices in the back yard, the contractor she hired installed dual pocket doors in the wall between her side and mine. Due to the way he installed the doors, when they were fully open you would have to fish the door out of the pocket. It was extremely irritating and I finally had enough of that that aggravation. So I pulled the doors out and fabricated a door stop that resides in the very back of the pocket. The final result is that when the door is now fully open it sticks out a half inch making the door that much easier to close. So excited this is now done. Now, I just need to find a quiet weekend to varnish the door.
-
@Juan El Boricua: coffee is of paramount importance!

@Cypren: I'm guessing those were a little more substantial than dog tag chain?

@Sos24: the Zippo but holder is a neat idea!
@LoopCutter: thank you for following along!

@JonesE: pocket doors are cool, but I can see how slipping too far into the pocket would be irritating.
Another great day, y'awl!

Day 9
Testing the wire cutters seems to be a must when I take on a PB multi challenge. First I had to use the awl to strip the sheath off this piece of Romex.
[attach id=0 msg=2499799]
Then I cut it. The hard wire notch worked a little better.
[attach id=1 msg=2499799]
Could I undertake a wiring project with only a Signal? Probably. But I'd want a little help from a Squirt E4. :D
[attach id=2 msg=2499799]
.jpg)
.jpg)
.jpg)
-
Day 9
Not much today, just letter-opening.
[attach id=0 msg=2499801]
-
Great pics, everyone
I still haven't taken my pic yet :ahhh -
Day 9
Opening the mail...


It's here!


-
Well don't leave us in suspense, Rich! What's in all the boxes?
-
Mainly, the black ARC. The other two are Christmas gifts (an engraved Bond, and a K4X). And Leatherman keeps sending me cups

-
Day 9:
Cut a zip tie open to release that nautic carabiner[attach id=0 msg=2499811]

-
Day 9
My shop tools got delivered today. My crystal ball says the Signal has a lot of packing tape in its immediate future.
[attach id=0 msg=2499824]

-
Day 9
Setting up a tent and a poncho shelter. Used the Signal to help with putting in the stakes. Decided using the hammer end just to push the stake works better than trying to “hammer”.
-
Day 10:
Pocket dump (+ a flashlight, forgot to add it to the picture)[attach id=0 msg=2499864]

-
Day 10
I got sick of the thumb stud, so I removed it. It positioned my thumb a little lower on the blade than without it, and that put my thumb a little too close to the blade while it was swinging open. I'm back au naturel


-
Day 10
Blue opened up the box for my 2008 microwave replacement; it will be missed.
[attach id=0 msg=2499893]
-
@Juan el Boricua: hope it was something good (ideally reading "pay to the order of")! And you got 15 years out of a microwave?
@m47mut4nt: that's an interesting carabiner!
@Cypren: time to get some stuff done, eh?
@Sos24: I can see the hammer being well suited as a pushing tool.
@Rich_SD: sounds about right. The Signal blade is tricky enough to open one-handed as it left the factory.
Another great day, y'awl!

Day 10
I guess the ferro rod might be decent enough for what it is. The whistle, on the other hand, could do well with a rework. The sound hole is so close to my lips that I couldn't consistently get it to make noise. However, it did consistently annoy Beijing (my dog). And the design prevents placement of any tools other than the saw on that side.
[attach id=0 msg=2499894]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

