Leatherman Signal challenge: October 2024
-
@Juan El Boricua: coffee is of paramount importance!

@Cypren: I'm guessing those were a little more substantial than dog tag chain?

@Sos24: the Zippo but holder is a neat idea!
@LoopCutter: thank you for following along!

@JonesE: pocket doors are cool, but I can see how slipping too far into the pocket would be irritating.
Another great day, y'awl!

Day 9
Testing the wire cutters seems to be a must when I take on a PB multi challenge. First I had to use the awl to strip the sheath off this piece of Romex.
[attach id=0 msg=2499799]
Then I cut it. The hard wire notch worked a little better.
[attach id=1 msg=2499799]
Could I undertake a wiring project with only a Signal? Probably. But I'd want a little help from a Squirt E4. :D
[attach id=2 msg=2499799]
.jpg)
.jpg)
.jpg)
-
Day 9
Not much today, just letter-opening.
[attach id=0 msg=2499801]
-
Great pics, everyone
I still haven't taken my pic yet :ahhh -
Day 9
Opening the mail...


It's here!


-
Well don't leave us in suspense, Rich! What's in all the boxes?
-
Mainly, the black ARC. The other two are Christmas gifts (an engraved Bond, and a K4X). And Leatherman keeps sending me cups

-
Day 9:
Cut a zip tie open to release that nautic carabiner[attach id=0 msg=2499811]

-
Day 9
My shop tools got delivered today. My crystal ball says the Signal has a lot of packing tape in its immediate future.
[attach id=0 msg=2499824]

-
Day 9
Setting up a tent and a poncho shelter. Used the Signal to help with putting in the stakes. Decided using the hammer end just to push the stake works better than trying to “hammer”.
-
Day 10:
Pocket dump (+ a flashlight, forgot to add it to the picture)[attach id=0 msg=2499864]

-
Day 10
I got sick of the thumb stud, so I removed it. It positioned my thumb a little lower on the blade than without it, and that put my thumb a little too close to the blade while it was swinging open. I'm back au naturel


-
Day 10
Blue opened up the box for my 2008 microwave replacement; it will be missed.
[attach id=0 msg=2499893]
-
@Juan el Boricua: hope it was something good (ideally reading "pay to the order of")! And you got 15 years out of a microwave?
@m47mut4nt: that's an interesting carabiner!
@Cypren: time to get some stuff done, eh?
@Sos24: I can see the hammer being well suited as a pushing tool.
@Rich_SD: sounds about right. The Signal blade is tricky enough to open one-handed as it left the factory.
Another great day, y'awl!

Day 10
I guess the ferro rod might be decent enough for what it is. The whistle, on the other hand, could do well with a rework. The sound hole is so close to my lips that I couldn't consistently get it to make noise. However, it did consistently annoy Beijing (my dog). And the design prevents placement of any tools other than the saw on that side.
[attach id=0 msg=2499894]

-
[quote author=Farmer X link=topic=92542.msg2499894#msg2499894 date=1728607037]
@Juan el Boricua: hope it was something good (ideally reading "pay to the order of")! And you got 15 years out of a microwave?Guess it was, as it lasted 15 with me; it was second hand! It was also a Panasonic. Probably paid itself a
loooong time ago.

-
Looking at the challenge's pictures, how many of us are sportin' the KVP bit carriers? ::)
-
-
Day 10
Bit driver help swap the belt clip on a pocket knife
-
I'm team pocket-carry, and I'm not liking the Signal's pocket clip. It makes the tool stick out too far.
Here it is compared to my ARC:

Here it is next to my Curl:

...and next to my Skeletool. The thing I like least about the Skeletool is how far it sticks out of my pocket, but it is still not far enough that I don't like carrying it. The Signal feels like it sticks out too far... but maybe I'll get used to it by the end of the month.

I’m not a fan of the pocket clip either, it sits too high and not tight against pocket.
Taking it easy with a glass of whiskey and a book before bed.
Sounds nice.
@Farmer X said:
@Juan el Boricua: hope it was something good (ideally reading "pay to the order of")! And you got 15 years out of a microwave?@m47mut4nt: that's an interesting carabiner!
@Cypren: time to get some stuff done, eh?
@Sos24: I can see the hammer being well suited as a pushing tool.
@Rich_SD: sounds about right. The Signal blade is tricky enough to open one-handed as it left the factory.
Another great day, y'awl!

Day 10
I guess the ferro rod might be decent enough for what it is. The whistle, on the other hand, could do well with a rework. The sound hole is so close to my lips that I couldn't consistently get it to make noise. However, it did consistently annoy Beijing (my dog). And the design prevents placement of any tools other than the saw on that side.
[attach id=0 msg=2499894]
The ferro rod works but not that well which is why I went ahead and also replaced it with bit holder.
-
Day 10
Boxes, so many boxes.
[attach id=0 msg=2499915]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

