Shop projects
-
After a few hours the workshop was warm enough for the welding machine to operate properly. So:
- Preparing for welding. The screws and clamps hold the TV holder in the right position and contribute to minimize welding distortions.
- Welding pretty much done. The edges of the TV holder was quite rounded so it took more heat than anticipated to get in those nooks. So some paint melted off here and there. No worries as long as it kept away from the actual weld areas.
- Finished with welding and removed clamps and screws. Later on the welds will be cleaned up and the bottom area spray painted matte black similar to the rest.
- Just a curiosity for those who haven't seen one: A welding stool. It can be tipped in three positions giving different sitting heights. Simple and great!
Hope someone found it remotely interesting





-
-
-
-
I so wish I could weld, I mean I can, I’ve done my share on cars, I like stick, but I just can’t now because of my seizures, I can’t be around the flashing lights! That one project I did from parts which was a recumbent trike from like 4 bikes all I used was nut and bolt, grinder and drill, that thing would have been soooo much better welded! Here’s a video the Mrs took when I was testing it out,,
JR -
That cycle looks good. I can imagine how welding would make it easier though.
I have machines for a few different welding processes for metal and few of them flashes much as such. Dirty base materials/ rust/ paint and whatnot will misbehave but they shouldn't be in a good weld in the first place.
Stick welding - random flashes and sparks.
MIG welding - less random flashes and sparks, but still there.
TIG weldiing - no random flashes or sparks, a single continuous light with turn on and off and intensity under your control.
Gas welding - similar to TIG welding.
Resistance welding - literally done in a single flash in a fraction of a second. I usually just close my eyes and fire. (If the weld itself is covered you can't even see the flash).
(There are many others too, but I don't have those).Then there is brazing as opposed to welding - the filler additive melts, but the base metals don't. The process has some advantages and disadvantages compared to welding. As a mad plumbarian you likely know it very well already. (I think some bikes are built like that rather than with welding?) Two options I find interesting is the option to braze using induction coils or high temperature ovens - the temperature makes the additive melt but not so high that the base materials get soft. (The base material can still have all kinds of reactions to being heated and cooled, but that might be for better and worse).
I'd like to try brazing with an oven or inductive coils, but so far I haven't had an excuse to spend time exploring - I imagine a sturdy setups and repeated failures will take more time and money than than justifiable for what I typically do.
-
Never really stopped in here before. Shame. Some good work here.
This is not really work IN the shop so much as it is work ON the shop. The house...the work bench is in the basement:
[attach id=0 msg=2499547]




-
^^^ Second and third picture give an idea the condition of the logs when I got here. Dry, peeling, exposing some wood. Second pic, bottom rows give a good example. Second pic top rows after HAND sanding and restaining with Sikkens (PPG) ProLux.
Top and bottom picks are front of house while work in progress. Too pic is the corner closest to driveway. Bottom pic wide view of front
-
I finally decided that hand sanding was out of the question if I wanted to get this done before I die someday. Took my Milwaukee grinder with a Diablo wheel and tried to touch the logs very gently.
Finished product front wall of the house:


-
-
Proluxe is good stuff, nice job

-
I've had this long running project with a frankenstein camera setup for a steady handheld use with a long heavy lens. I'm finally getting there, and apart from some rewiring only the handle remains. I don't want to add more weight than necessary so I got a carbon fiber tube, and now the little shop project is to cut that. I suspect those working carbon fiber has some special saw blades, but I decided to give it a go with a pipe cutter for stainless steel pipes.
- Initial plan - carbon fiber tube, aluminium end reinforcements, pipe cutter and deburring tool.
- The pipe cutter had been used for stainless steel pipes so the edges were properly rounded. For a better chance of a decent cut I decided to change the blade with a new one. That turned out to not be so easy as the center pin needed to be pressed out. I considered a hammer and pin, a gear puller, and a rack and pinion press.
- Rack and pinion press seemed the most controlled so that was it.
- Starting the cut.




-
- Nasty edges to deburr. Likely also wrong deburring blade for this.
- Gluing the aluminium end pieces in place.
- Mounted handle. A bit of glue spill, but that should wear off at some point.
- Works well - balanced in use, when put down, and during carrying by the handle. Yay!




-
Nice! The kid wants to get into photography,,
JR -
The aim is get some pictures of the wildlife around here. Elk, reindeer, deer, stout, eagles, ptarmigan, fox, hare, swan, various ducks and smaller birds, marten, least weasel, and two big ass otters which will hopefully have some funny offsprings. Lemmings are surprisingly good models too when they are not upset by something. And if stars align maybe even the odd lynx or wolverine.
Maybe even tourists
- I once saw a red cap sticking up of some high vegetation, and by closer inspection it turned out to be an entire japanese family with two kids in there doing selfies! -
@Vidar said:
The aim is get some pictures of the wildlife around here. Elk, reindeer, deer, stout, eagles, ptarmigan, fox, hare, swan, various ducks and smaller birds, marten, least weasel, and two big ass otters which will hopefully have some funny offsprings. Lemmings are surprisingly good models too when they are not upset by something. And if stars align maybe even the odd lynx or wolverine.Maybe even tourists
- I once saw a red cap sticking up of some high vegetation, and by closer inspection it turned out to be an entire japanese family with two kids in there doing selfies!Idk what he wants to do, just that he wants to get a few expensive items to start his adventure, our one friend does little, yet she does “old things” like graves or memorials,,
JR -
There are so many subjects and styles of photography so he might just be curious to learn and explore. It doesn't really have to be expensive getting started - lots of good quality used equipment around which photographically functions just as todays models. The sensors are somewhat better, and the framerate higher, but people did take good pictures a few years ago too!
And it is usually easy enough to sell used as well. I've sold many lenses as part of upgrading or getting something else - lenses seem to keep their value pretty good.(The exception being flashlights as Canon changed their communication protocol or something a few years after I got mine. I'm still stuck with an entire set of various previous era flashlights which do an amazing job of collecting dust. I guess that is a risk - big changes to the system of system cameras).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
