My 3DC
-
@Grant Lamontagne said:
I also think using Cura instead of the XYZ Printing software will make a huge difference in setting things up. I miss Cura.
If you get the X1, check out OrcaSlicer. It’s an open-source fork of Bambu Studio, which is itself a fork of PrusaSlicer. It does a great job of supporting the bleeding edge of 3D printing features while also supporting all of the proprietary tech in the Bambu printers.
-
Thanks for the heads up. I hadn't heard of OrcaSlicer, but I will definitely look into it when the time comes.
Def
-
In my attempt to only manufacture useful items, I have once again tried to do something useful. Whether I have succeeded or not remains to be seen, but I'm proud of how well it turned out anyway.
My father has an iRobot Looj, which is basically a Roomba for your gutters. We got it for him years ago so he didn't have to keep going up and down the ladder to clean his gutters. He's not getting younger, and has a bad habit of miscounting steps on the way back down, so we worry about him a bit. :facepalm:
Here's the Looj:
It's been working well for him for many years, but as they are long since discontinued, he can't seem to get parts for it. This goes to show just how unsuccessful they truly are because iRobot has a backlog of parts for all their other models, no matter how old or obscure.
The part that broke is the plastic piece that attaches to the output shaft on the front of the Looj. It basically is an extension that holds the rubber paddles that flip the leaves and stuff out of the gutter as the Looj drives along.
Discontinued plastic part?
This sounds like a job for....
My 3D Printer.
Now, I am far from being a wizard with Fusion 360, but I managed to whip up a reasonable facsimile of the part Dad needs and I am a bit impressed at what I have managed to come up with. Once I got home from visiting I set about refining the design to add a bit of strength here and make printing easier there.
Last night I set up the printer, loaded one of the tougher filaments I have (still PLA as that's all my machine does, but not all PLA is created equal), set it to 90% infill and let it go overnight.
This morning I pulled the part off the printer and it is one of the better prints my machine has ever done- I am super thrilled about that, and the part seems to be a lot sturdier than I was expecting.
I'm going to mail it off to my father tomorrow (going to print another couple of them, just in case) and, if it fits, I am going to upload the design to Thingiverse in case anyone else needs this odd part for an expired doodad.
Basically the gear looking end fits on the machine end, and the rubber paddles slip into the slots on the other end. There are also some whisker bristle things that were on the original, but I don't have a good way to recreate them so I didn't. There are also some thinner points that I think may also be stress points designed to break (and coincidentally where my father's broke) that I didn't include as I figured the printed PLA probably wouldn't stand as much torque as the molded ABS original part would anyway.
All in all, not an overly complex part, but it was a fun exercise to model it. I really don't have much experience working with curves, and if I had to do it again, or make a more complex version I think I would make the shaft octagonal or decahagonal to simplify matters somewhat. For an initial attempt I figured I wouldn't stray too far from the original.
Also, since I didn't put in the whisker segment or the break segments, I figured I could shorten future versions to make them print faster and use less material while still doing the same job. But, first let's see what works and what doesn't before I start getting all fancy. :D
Def




-
Nice! That looks pretty solid to me. Hope it works out.
-
That certainly seems to do its part. And there should be many opportunities to reinforce it with metal inserts/ rods/ plates or glassfiber coating if even more robostness should be needed.
(I usually had to do a trial run as prints seemed to shrink a bit compared to the computer file - and different shrinks in xy and z directions just to make things more interesting. I have some camera housing parts just waiting for 4% smaller cameras to be made :-\ ).
-
Yes, I noticed that the slots in the sprocket were much smaller than anticipated. I may have to redesign it to make them bigger. I'm not sure if they are functional or decorative.
I'm going to try increasing the size by 5% or so and see if that helps any.
Def
-
That's better than I'd do. Nice work!

-
I printed two from my original plan then decided to start again from scratch and build it more like the way I'd make it, without worrying too much about how the original one was designed. It's got the same slots and wings, but I've shortened it and opened up the sprocket slots. I'd rather it's too loose than too tight. That is, if anything even connects into them.
Yeah, I didn't take any decent photos of the connection point on the robot. Rookie mistake.

Anyways, if nothing else, I built some extra reinforcement into it and used an octagonal body instead of a cylindrical one, figuring it would be easier to cut into, attach the wings to etc.
It was, sort of. I didn't square the flat side of the octagon on the plane, which meant everything had to be done on weird angles.

Oh well, I managed it. The octagon made it easier to create the sprocket end at least since there was eight points to work from.
Def

-
This is the part, which unfortunately doesn't appear to be in stock anywhere.
The slots on mine are where these flexible rubber paddles slip into. You can also see the whiskers that I didn't bother with.
Def

-
@Grant Lamontagne said:
I printed two from my original plan then decided to start again from scratch and build it more like the way I'd make it, without worrying too much about how the original one was designed.Makes sense. The alternative production process likely has a different optimal part geometry than the original.
I have some resin going out of date soon. I should really be making some stuff.
-
I keep looking at resin printers. There are a few things I want to print that are better in resin, but it looks like such a hassle, what with all the washing and UV treating etc.
If you are looking for a way to use up the resin, I have a few projects I'd be willing to share. :D
Def
-
@Grant Lamontagne said:
I keep looking at resin printers. There are a few things I want to print that are better in resin, but it looks like such a hassle, what with all the washing and UV treating etc.If you are looking for a way to use up the resin, I have a few projects I'd be willing to share. :D
Def
There are some water soluable resins which are supposed to be house friendly. I haven't tried any of them though, as I mostly do wax, abs like and flexible.
I got an LCD and DLP resin printer. The LCD one hasn't been used since the arrival of the DLP - while on paper more precise, the real world result is quite different. The DLP one makes prints far more true to the 3D model - flats are flat, circles are round, and next to no sag, twists or local shrinks and distortions.
There are two key issues with the resins - during printing some smells and the gases might be less than healthy. I think that has come some way though, and I see printers now come with attachments for a venting ducts as well. That would have been nice.. Failing that I have two carbon filters working inside the cabinet next to the resin during printing which removes a lot. And I print under a ventilated hood. (I might still want that even with a duct as you do need to handle this stuff somewhat).
Then there is the cleaning of the parts. That became a whole lot easier and better with these automated cleaning and UV light machines. So now I take the entire buildplate off the printer, throw it in one of the tanks filled with cleaning chemicals and let the machine do its thing. And I boought two extra of those tanks so I just transfer the build plate to the next one with water, do the machine thing, and repeat with yet another one with water. Then pick off and UV light it. (I also got an extra build plate so I can start a new print without waiting for this cleaning process).
In theory I shouldn't have to touch any wet resin, but of course spills and happenstance so happen so gloves it is. And since I have various breathing stuff anyway I use a full gas mask, or more comfortably, my powered air respirator with chemical filter. With good ventilation you might do without any. I used to get a head ache from cleaning these things before the cleaning machine though, and as I have them anyway I just wear them.
Parts wise you also want to make sure the designs are such that surplus resin has a way to drain back and not get trapped in a chamber or hollow somewhere. And orient the parts of the build plate so that it is easy to drip off between layers.
If you have some parts then I can take a look. The resin might be a bit so-so already though - it would help if the parts are Dali inspired clocks.. :D
-
I've sent you a PM.
I am fascinated by resin printing, I'm just also a bit concerned about it. Megan already hates my filament printer, I can't imagine also throwing in something that could spill and spells.

Def
-
You need a doghouse for you and the printer..
Actually separate dog houses would be best. Add more doghouses for any dogs you have too I guess. (Although the only place in this world our dog would never ever go was in his dog house. Figures...) -
What I need is a bigger house with a (soundproofed and well ventilated) room that I can set up a bunch of different toy.... Uh... Ools.... Toyools. Yeah, that's it.
I could set up my laser engraver, maybe a few different 3D printers, possibly a small CNC and a spray booth for painting.
And, so nice I'm dreaming already, maybe a seperate workshop for wood and metal working too....
Anyone want to subscribe to my OF account? :P
Def
-
Toyools... I need to remember that term. :D
-
I feel like you are missing the point of OF of you have to ask what's on it.....

Def
-
Internet has given new meaning to the saying "ignorance is bliss". I'm pretty sure I ignore most of it to my benefit. I wonder though if I might be particularly blessed ignoring any pointy bits on OF?
OF might not be ready for machining, grimy grease and automated motions.
-
I have comments, but as this is a family forum, it's bet if I keep them to myself! :ahhh
Getting back to topic, I had originally designed the end that connects to the Looj as circular because that's what it appeared to be on the Looj itself. After doing some more research I realized that it should be a square socket. Since I wanted to enlarge the sprocket slots anyway, I redesigned that end. It's been on the printer since last night, and is still going. Apparently the old one was rounded out over the years, at least to the point where it appeared round when I was doing my measurements.
Hopefully it will be finished before I leave for work as I am curious to see how it comes out.
Notes for designing things in the future... take more photos of the thing I'm designing a component for, measure a lot more things and take better notes. Also, in a case like this, if the thing is small enough, take it with me for test fitting, if not actual testing, then send the thing along with the new parts.
This would have saved me a lot of effort.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login