MultiTasker-AR15 tool
-
http://multitaskertools.com/info.html
I have recently been looking for a multi tool to carry in my chest rig. After looking around at some of the other designs on the market, I decided to give the multi tasker a try. This thread http://m4carbine.net/showthread.php?t=28046 is where my search began.
Initial thoughts:
This tool is built like a tank. It is a little heavy (11 oz), though considering the tools it replaces I would suggest it's not that heavy. The G10 grips are comfortable and secure. The tanto blade came hair popping sharp, I prefer tanto for this application for the straight edge. The knife also has a liner lock that is solid. There's a larue wrench 3/8" boxed, it works as advertised. Standard file with sharp chisel tip. Bent tip carbon scraper is handy and can be used in more than one cleaning application. I like the castle nut wrench but I couldn't test it since I have a magpul UBR, I would assume this wouldn't be used for torqing just for field tightening. There is also a front sight adjustment tool that doubles as a screwdriver with included bits. The shaft is long enough to reach the pistol grip screw, added plus for me. The bits are well made w/ball detent (hollow ground from high carbon steel) and most sizes are AR15 typically used sizes. Overall initial impressions are this tool is what I have been looking for. Lets get on with some pictures
Picture review:
G10 panels really set this tool apart from most multi tools on the market. The bolts are extremely rugged for my untrained eye.

Simple needle nose pliers with wire cutter. Straight forward, essential.

Castle nut wrench. Not sturdy enough to torque, however plenty sturdy enough to tighten those unstaked castle nuts so your range day dosent end pre-maturely.

4 Prong front post sight adjustment as well as screw driver bit holder. The prongs on this adjustment tool do not bend like other sight tools I've owned in the past.


The bits are commonly used sizes in most AR15 accesories. (2 flathead, 1 phillips, T10 Torx, T15 Torx, plus 3/32”, 7/64”, 1/8”, 9/64” and 3/16” hex bits)


The larue wrench.(3/8") I know what you're thinking "larue sent me one with my mount" well I understand this one comes already mounted in every Multitasker. Free with purchase of Multitasker

As you can see this tanto is for lefties. I bet if the designer was right handed then this wouldn't be mounted wrong


Liner lock. Locks up good, I would be willing to say all my folders have liner locks. Leatherman probably has a trademark on their multitool locks.

Needle nose are small enough to get the retaining pin out.

Chisel tip. Until I used this I had never cleaned out the bolt carrier.


The bent tip scraper has a perfect radius to it. I understand this was inspired by the Chinese traditional bamboo ear-wax pickers. I used to just scrape this crud off with a pocket knife, state of the art cleaning

Also gets down inside those hard to reach places in your BCG.

YECK!! Actually most of the chunks went flying while this scraper worked.

Heres a look at the shims. If I recall correctly the shims are brass instead of plastic.

I was told the case may be redesigned. I would like to see some Olive drab. I know digital is the new black but I still prefer OD.


Final thoughts:
This Multitasker fits my needs and does so in a compact durable design. The tools that fold away into this multitool cannot be carried on my chest rig like this can. In fact I would suggest to anyone that has a better design get producing, though I think you'll be surprised to find there is experience in this design. The designer also put the 1911 tool on the market and it has it's place as does this tool. I have other multi tools (leathermans) several in fact and they will stay where they are, though my multitool will be in my administrative pouch on my rig. Only suggestion I could come up with for the designer is to design a better way to get the sight tool out, perhaps a thumb catch of some sort. Also an OD case would be better for me. Knife seams like it is for lefties and this could be neccesary with clearances, kinda a non issue.
This is my first review and I hope it helps in some way. I have been wanting to write reviews for some time. I wish I could have had more in depth discussion, though I prefer the reader to see what I can show them with pictures. I have got to get a better camera and lighting. I hope to do a review on at least one of the other multi tools, my dad has the one on order that goes in the grip.
slide show of my product testing
http://img41.imageshack.us/slideshow/player.php?id=img41/4681/1245128928z98.smil -
-
-
Looks like an interesting tool

-
Thanks for the replies. I looked at the other ar-15 tools. I had a multitool in my chest rig, this took the place of it. I still kinda have a multitool in my chest rig but now I have less tools in my range bag and more tools in my chest rig. The gerber tool was expensive and didn't have all my "needs" in mind. The one samson was also pretty high and wouldnt go in my MagPul MIAD. I went this route due to it's capability and what I needed. If you have plenty of multitools already and maybe plenty of cash, try the other ones.
-
Thanks for the review tinman. By the way, don't sell yourself short regarding pictures and lighting, I think the photos in your review came out just great!

As regards the MultiTasker, it appears to be a purpose-built tool from the ground up, would you agree? (In other words, it doesn't look like some generic crap Chinese multitool that someone just added a few AR15-specific junky tools to......?)
I like the look of the plier head, I like the G10 scales, little things like the file blade and the sight adjustment tool appear to be quality made. But of course I can only tell so much from looking at photos...what are your first hand impressions of the quality?
-
Great review and the pics look great to me as well
I like that it is a specialized MT in the future it would be nice to see some of the big names to come out with more specialized versions as well
Example ( a MT geared towards motorcycles or a MT with tools that a Bricklayer ::) might need
) Great read thanks 
-
@J-sews said:
Thanks for the review tinman. By the way, don't sell yourself short regarding pictures and lighting, I think the photos in your review came out just great!
As regards the MultiTasker, it appears to be a purpose-built tool from the ground up, would you agree? (In other words, it doesn't look like some generic crap Chinese multitool that someone just added a few AR15-specific junky tools to......?)
I like the look of the plier head, I like the G10 scales, little things like the file blade and the sight adjustment tool appear to be quality made. But of course I can only tell so much from looking at photos...what are your first hand impressions of the quality?
Thanks for the props on the photography, I worked as a action photographer in NY for a couple years with a 30k camera and that was ten years ago. These photos in comparison are "ok".
As far as the purpose built, I would definately agree. The designer "Shane" did exactly this, designed a multitool with ar15's in mind, he wanted a multitool with ar15 bits not a ar15 tool with multitool bits. At least thats the impression I got from him. This tool is durable, built like a tank. If you are in the SouthEast and can attend a silencer shoot a week from Saturday I'll have mine with me and you can mess around with it.
It's funny that you said "(In other words, it doesn't look like some generic crap Chinese multitool that someone just added a few AR15-specific junky tools to......?)" That is almost a direct qoute from another website where a review was recently done on this exact tool. Although I assure you it is not.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login