The December 2024 Utility Knife Challenge
-
DAY 1
I don't recall where I got this little guy, but it's handy and will be making a lot of appearances.
[attach id=0 msg=2507245]

-
DAY 2 Mossy Oak cutter trying not to cut water bottles while one handing a pic. :o
[attach id=0 msg=2507258]

-

My favorite utility knife/box cutter for EDC is the Screw Pop. Yeah, who knows where the name came from. But its about as minimalist as one can get in this genre, and rides easily with the rest of your pocket toys. It won't deploy in your pocket. I prefer a carbide blade for long edge retention. This thing gets used more than my EDC knife or MT blade.Amazon link: https://tinyurl.com/ms77b3x6
-
Day 2
Not much action today on a foggy and overcast day here in Puget Sound. Did manage to do a quick cleaning of the fastback. Also showing one of the features I like about the fastback. The bit driver is awesome. It is in centerline with the handle and locks into place when full open. The bit is double sided so you get a #2 Philips and 1/4” slotted bit. The bit holder also has a half open detent that is also useful.
-
@Alan K: I like the cord cutter feature, too. There are circumstances in which it would come in very handy.
@ReamerPunch: I have a similar deal. It may make an appearance later on.
@AzteCypher: I don't need to be on vacation to have a huge pile of junk mail.
@Cypren: safe travels and sorry to see you bow out!
@Fireman: great first challenge photos!
@powernoodle: are you joining in?

@JonesE: adding a bit assortment would make that one very capable tool!
A great day 2, y'awl!

Day 2
I cut up bus transfers before disposing of them, especially if they're not expired at time of disposal. While cutting a stack of three in one shot didn't work too well, individually they were no match for the EAB.
[attach id=0 msg=2507307]
Utility knife record: 2-0.

-
Love these Milwaukees, Klein and Gerbers. As well as that screw cutter EDC blade.

-
Day 3
[attach id=0 msg=2507311]
This MUJI mini cutter was bought after the previous MUJI. It is a mini version, the slider and snapper are smaller. Similar designs. Use shorter blades (or old used snapped-shortened blades). MUJI sells pack of "short blades" but I just throw in used blades. I usually keep this near to my door. Very handy to unpack boxes etc. And these kind of work dulls the blades faster than cutting A4 paper, such that I can get rid of the nearly used blades quicker.[attach id=1 msg=2507311]
Disassembled[attach id=2 msg=2507311]
Back of parts[attach id=3 msg=2507311]
Compared to regular size one.No surprise, you can switch the sliders between the two, but the MINI one will need to use an even shorter blade.




-
Action shot: Cutting bubble wrap to unwrap a printer.

-
Day 2: I used the Klein to remove a scribe from a discarded clam pack of old cheap screwdrivers. I'd removed the panel the pack was screwed to, and had carried the remaining pack to a spot in the hay shed attached to the barn ahead of throwing it out. My grandmother was getting ready for some hay to be delivered, and noticed it had accidentally been left behind.
But, I misplaced my camera.
Got a photo of my two Olfas--9 and 25mm. My local Lowe's has 9mm blades, but not 25mm. Thus, chances are I'll have to order them.
[attach id=0 msg=2507315]
Also, I will get photos of my Gits Razor Knife and Valet Auto Strop Razor Knife. The Valet takes a single-edge razor blade with NO crimped reinforcement. These have proven hard to find in carbon steel.
Turns out, Olfa makes those, and my Lowe's has them.


-
@Farmer X said:
@powernoodle: are you joining in?
No, just stopping by to say hello.

-
Day 02
I would have thought there were more utility knives around the house, but this is all I've found so far. The Workpro is probably my favorite for all day carry because it is so light. It also doesn't need a tool to change the blade, and has a liner lock like the black tool, but it doesn't have the line cutter notch.
-
<u>Day 2</u>
I need to dig out my other two utility knives. I don't use them as EDC as they're too big for my daily carry. I saw a Civivi one today that looked interesting but I don't like that it's as long as a regular pocket knife. Sure did look purty though.

Using my EAB to cut the netting off our Christmas tree.

-
I forgot completely about signing iup for this challenge.
My DAY 1
[attach id=0 msg=2507320]
Stanley 10-049
I used this knife for modifying PCB circuits, cutting traces and modify circuits with surface wires.
Now to catch up my postings.

-
Day 3
Unbranded. Works fine.

-
Not much action today on a foggy and overcast day here in Puget Sound. Did manage to do a quick cleaning of the fastback. Also showing one of the features I like about the fastback. The bit driver is awesome. It is in centerline with the handle and locks into place when full open. The bit is double sided so you get a #2 Philips and 1/4” slotted bit. The bit holder also has a half open detent that is also useful.
That's a great duo of tools. I've got a Milwaukee Fastback, but not the one with the screwdriver. However, my wife was just asking about what I want for Xmas... ;)
-
<u>DAY 3</u> I've got a couple of these knives that say Project Source on the handle. I think I must have bought them for my wife to lose instead of my good ones.
[attach id=0 msg=2507327]

-
Cool to see how many styles of utility knife there are.
Day 2
Opened the Advent Calendars for the Fam and got out the first day's haul.

-
Day 03
Advent calendars are fun. All I opened today was a new bottle of pills.

-
Day 2
I knew this upstairs with my knives, and was easy to locate.
This is a tool I snagged from the SOS box a visit or two back.
[attach id=0 msg=2507367]
A Gerber PryBrid if I matched it up correctly.
Honestly, this has not seen any use by me yet. Thinking the pry or nail lifter will be handy.
The blade exchange is straightforward, it is a bit touchy to deploy and retract, even after oiling the slide.
I may report on this one again if I do get to utilize in a real life purpose. 😉
-
My
Day 3 (caught up)This is my handiest utility knife. Used for few years when working construction and was carried in my tool bag side pocket.
[attach id=0 msg=2507368]
Today it yet slides opens effortlessly and easy to change blades as well as to load new back up blades.
[attach id=1 msg=2507368]
Only one spare blade. ☺️


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
