The December 2024 Utility Knife Challenge
-
Day 02
I would have thought there were more utility knives around the house, but this is all I've found so far. The Workpro is probably my favorite for all day carry because it is so light. It also doesn't need a tool to change the blade, and has a liner lock like the black tool, but it doesn't have the line cutter notch.
-
<u>Day 2</u>
I need to dig out my other two utility knives. I don't use them as EDC as they're too big for my daily carry. I saw a Civivi one today that looked interesting but I don't like that it's as long as a regular pocket knife. Sure did look purty though.

Using my EAB to cut the netting off our Christmas tree.

-
I forgot completely about signing iup for this challenge.
My DAY 1
[attach id=0 msg=2507320]
Stanley 10-049
I used this knife for modifying PCB circuits, cutting traces and modify circuits with surface wires.
Now to catch up my postings.

-
Day 3
Unbranded. Works fine.

-
Not much action today on a foggy and overcast day here in Puget Sound. Did manage to do a quick cleaning of the fastback. Also showing one of the features I like about the fastback. The bit driver is awesome. It is in centerline with the handle and locks into place when full open. The bit is double sided so you get a #2 Philips and 1/4β slotted bit. The bit holder also has a half open detent that is also useful.
That's a great duo of tools. I've got a Milwaukee Fastback, but not the one with the screwdriver. However, my wife was just asking about what I want for Xmas... ;)
-
<u>DAY 3</u> I've got a couple of these knives that say Project Source on the handle. I think I must have bought them for my wife to lose instead of my good ones.
[attach id=0 msg=2507327]

-
Cool to see how many styles of utility knife there are.
Day 2
Opened the Advent Calendars for the Fam and got out the first day's haul.

-
Day 03
Advent calendars are fun. All I opened today was a new bottle of pills.

-
Day 2
I knew this upstairs with my knives, and was easy to locate.
This is a tool I snagged from the SOS box a visit or two back.
[attach id=0 msg=2507367]
A Gerber PryBrid if I matched it up correctly.
Honestly, this has not seen any use by me yet. Thinking the pry or nail lifter will be handy.
The blade exchange is straightforward, it is a bit touchy to deploy and retract, even after oiling the slide.
I may report on this one again if I do get to utilize in a real life purpose. π
-
My
Day 3 (caught up)This is my handiest utility knife. Used for few years when working construction and was carried in my tool bag side pocket.
[attach id=0 msg=2507368]
Today it yet slides opens effortlessly and easy to change blades as well as to load new back up blades.
[attach id=1 msg=2507368]
Only one spare blade. βΊοΈ


-
Day 3:
Recently learned Walmart had two different Benchmade Bugout clones--partial liners (just like the real deal) and unknown steel with white handles for $5, and D2, skeleton liners, and orange for $10.
Thus, I bought a few extra as Christmas gifts when people show up. D2 for people I'm closer to, budget for others. I had selected Tuesday, assuming WM would just ship them to me. They ended up having someone deliver it from the store just a few minutes ago.
I have to admit, these certainly don't feel like a $5 knife. Can't wait to see how the D2 one will be.
[attach id=0 msg=2507387]

-
Day 3
Continuing on with the Milwaukee Fastback and PST combo. The fastback has a handy clip that supports tip down carry. It is a deep carry clip which I like. However, I do have a strong preference for tip up carry. It is one of the things I would change if I could. It also has a handy lanyard loop on the clip side should you need it. One thing I should note is that the handle is plastic. I really thought I would hate a plastic handle, but I am now prefering it on a utility knife. The reason is that when the outside temperature drops the handle is more comfortable than a ice cold aluminum handle.
JonesE
-
@Fireman said:
That's a great duo of tools. I've got a Milwaukee Fastback, but not the one with the screwdriver. However, my wife was just asking about what I want for Xmas... ;)Thanks Fireman, If you are able to pick one up I think you will really enjoy it. I think it is one of the better Multitool utility knives out there. I have lost a couple. I think I now have two or three scattered around the garage and truck.
JonesE
-
Day 3
Opened some extra blades that will presumably come in handy later during the challenge.

-
This will be but a brief post...I have to steel myself for payment of phone bill and a hefty gas/electric bill. But y'awl are doing great!

Day 3
I used the black topo EAB to open a bag of cat food. Of course, the action shot was a blurry mess.
Tommy wasn't too keen to look at the camera, but I'm sure he's grateful to have his food.[attach id=0 msg=2507401]
Utility knife record: 3-0.

-
Day 4
Neiko 00678A
Yeah, maybe skip this and get something else.
It's a pivot lock (button lock, but the button is the pivot). But it cannot be opened with one hand. Pressing the button unlocks it, but it is incredibly stiff, so it does not flick open. But you can close it with one hand, so there's that.It holds two bits, but they left space above them(presumably to allow a finger to fit behind the bits and unfold them) that the bits can slide back and forth in their holder. And they're loose in there.
The pocket clip is a very shallow carry. Almost half the tool would stick out of the pocket. Absolutely terrible. It could have gone to a dozen other positions and been ok.
It holds three spare blades. And it works to cut things. Not uncomfortable in the hand. But the design choices are questionable. I regret getting it. I thought it was a copy of the Hart utility knife, but the Hart is much better.



-
Day 4
Last of the MUJI cutter series (that I have). This is an updated design that is able to mount the blade the other way such that it is OK to operate with left or right hand. It is still the same minimalistic design but changed the slider to white. And the "dot" in the slider is smaller to make flipped mounting possible. Tip of the main body is updated to symmetry as well.
As said earlier MUJI often asks manufacturers to make their own version. This left/right hand feature is also seen in NT cutter. So I suspect it is OEM by NT cutter, but it is only my speculation.
[attach id=0 msg=2507417]
Front[attach id=3 msg=2507417]
Back[attach id=1 msg=2507417]
Disassembled[attach id=2 msg=2507417]
Back of parts



-
... Continue
[attach id=0 msg=2507418]
Normal mounting of blade (right hand)[attach id=1 msg=2507418]
Flipped mounting (left hand)Overall it is a reliable auto lock light duty cutter with pleasing look.
[attach id=2 msg=2507418]
Shot with other MUJI Cutters I have.



-
<u>Day 3</u>
The breaking down of boxes has commenced. I suspect I'll be doing a lot of this during this challenge along with cutting down cardboard so that it fits in the recycling bin.

-
@Fireman said:
<u>DAY 3</u> I've got a couple of these knives that say Project Source on the handle. I think I must have bought them for my wife to lose instead of my good ones.[attach id=0 msg=2507327]
I agree, this is also why I have tossed cutters around the flat.
@ReamerPunch said:
Day 4Neiko 00678A
Yeah, maybe skip this and get something else.
It's a pivot lock (button lock, but the button is the pivot). But it cannot be opened with one hand. Pressing the button unlocks it, but it is incredibly stiff, so it does not flick open. But you can close it with one hand, so there's that.It holds two bits, but they left space above them(presumably to allow a finger to fit behind the bits and unfold them) that the bits can slide back and forth in their holder. And they're loose in there.
The pocket clip is a very shallow carry. Almost half the tool would stick out of the pocket. Absolutely terrible. It could have gone to a dozen other positions and been ok.
It holds three spare blades. And it works to cut things. Not uncomfortable in the hand. But the design choices are questionable. I regret getting it. I thought it was a copy of the Hart utility knife, but the Hart is much better.
This is the first time I see a utility knife a bit holder designed this way.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better π
Register Login

