The December 2024 Utility Knife Challenge
-
-
Great work for today, y'awl!

Day 5
There was no need for a utility knife today (but I did need a can opener, which is atypical for weekdays). So today's photo is a glamour shot of the EABs and the tool selected for can opening.
[attach id=0 msg=2507590]
Utility knife record: 4-0.
And if awl goes well, I'll get a slightly longer rest tonight.

-
Day 5
Christmas gift for my wife.

-
Day 6
Milwaukee Fastback. I see they come with a ball detent for the bit. Mine has the ring spring.
Just excellent. A real classic.
I'm removing the worn Velcro from the cargo pockets of my pants to put snap buttons.
-
<u>Day 5</u>
My wife asked me to open this package of napkins like a civilized individual, so I obliged. :D

-
Day 6
NT cutter STL-ONE.[attach id=0 msg=2507602]
Front[attach id=1 msg=2507602]
BackStainless steel and stainless steel blade equiped, claims to be made with chemical resistant plastic. Basically same as A-1P. Body and blade made from stainless steel. The slider is made from pleasing looking yellow plastic instead of red painted silver plastic of A-1P. Usually I like more muted color, but this time it looks sharp but in a good way. Snapper is made from stainless steel with a small circle of same plastic used in the slider at the end. Blade can be flip mounted for both left and right hand usage. Left and right stamped on the body. From the back stamping, one can tell it is the same body as A-1P.


-
Continue
[attach id=0 msg=2507603]
Parts[attach id=1 msg=2507603]
Back of partsNT cutter made this STL-ONE claiming the stainless steel blade is less hard than carbon steel and less likely to scratch car windows. And their main target is to sell these to operators who stick films to car and car windows. I guess chemical resietance is in such industrial setting. However I think most plastic offers some kind of chemical resistance, it is more likely the silver paint of A-1P is chemically vulnerable.
[attach id=2 msg=2507603]
Normal mounting[attach id=3 msg=2507603]
Flipped left hand mounting



-
Continue
[attach id=1 msg=2507605]
In original package, it says window film cutter, organic solvent resistant[attach id=0 msg=2507605]
Action shot opening boxes searching for printer inkIn short, this STL-ONE is an all stainless dual hand auto lock design with a little plastic. Very useful for opening food packages or when sanitizing the blade with alcohol is needed.


-
I forgot to take action photos today. I used the fastback to remove the scales from this little Vic today. It also got used to free the scales from the packaging. First time installing brass scales on a Vic. This one makes me smile.
JonesE
Tbh I have been resisting to get the fastback driver cutter. But it is really attractive. Goes very well with a small plier like cobra xs or multitool like PST or bond.
Metal case/scale always make me smile. Good use.
-
-
Day 6
The STANLEY, even with the old blade, was assigned package opening duty to inspect a Christmas gift.
[attach id=0 msg=2507641]
I can only say, it was a CASE special request from a grandson in Sky Blue Bone!

-
@BPRoberts: I'm sure she'll like it!
@ReamerPunch: I lack the patience (and skill) needed to swap Velcro for snaps.
@AzteCypher: I haven't opened a package of napkins in a long while. I just use paper towels or a cloth napkin.
@kaevin: I like the little flash of yellow!
@LoopCutter: sky blue bone? I bet that's pretty!
Day 6
One great thing about utility knife blades is that they're very sharp. I used the silver topo EAB to prove that with a piece of receipt paper. It was a pretty one-sided deal (sorta like the Detroit Lions did to another team with a wildcat name).
[attach id=0 msg=2507659]
Utility knife record: 5-0.

-
Day 06
Fresh blades as needed is the major advantage of EDCing a utility knife.

-
Day 5 (forgot yesterday)
Put a new blade and switched to the Olfa.
Since when have Olfa blades been black oxide? The original blades in this knife were uncoated, as were its first box of replacements. My 9mm and this new pack (both from Lowe's this year) are black.
[attach id=0 msg=2507667]
![KIMG1196[1].jpg](/assets/uploads/_imported_attachments/migrated/577660_KIMG1196%5B1%5D.jpg)
-
@cody6268 said:
Day 5 (forgot yesterday)Put a new blade and switched to the Olfa.
Since when have Olfa blades been black oxide? The original blades in this knife were uncoated, as were its first box of replacements. My 9mm and this new pack (both from Lowe's this year) are black.
[attach id=0 msg=2507667]
Olfa and NT cutters are selling these "black coated" blades, advertising they are sharper.
https://olfa.com/blogs/professional/olfa-silver-vs-black-blades-which-one-is-for-youThe local paint workers here swear by black blades when they use scrapers that can mount utility blades to remove old paints from wall.
The orange color screams OLFA :D -
Day 7
Today, last of my "silver stainless steel utility blades". The Tajima LC-302 is similar but a little bit different in that it is a screw lock model. This is the first Tajima I bought after I have lost the original LC-301. But I have not adapt to screw lock type of cutters.
[attach id=0 msg=2507671]
Front[attach id=1 msg=2507671]
BackThe back has brand and model name as well as "stainless steel" stamped. Unlike the modern day LC-301 which has nothing on it.
[attach id=2 msg=2507671]
Parts[attach id=3 msg=2507671]
Back of parts



-
Continued..
[attach id=0 msg=2507674]
Back of sliderThis Tajima has stainless steel body and snappers. The slider is 3 pieces. A black plastic part, a brass screw and the dial is a lighter metal, which it seems to be aluminum to me. Removing the sticker will reveal the brass screw underneath, it is subtle enough that I want to keep this sticker on the dial.
It seems it would not be too hard to get a piece of brass drill two holes and put 2 pieces of screws onto it to make a truly all metal build. But I don't have a CNC.
When I was a teen, I used to assemble Japanese Gundum models, Tamiya 4WDs etc. Those weak plastic lock cutters or auto lock cutters sometimes do not hold the blade tight enough. Those are the only time I opt for a screw lock type of cutter. But in reality, I should have used a mini plastic saw instead of a cutter to "saw" through thick parts.
[attach id=1 msg=2507674]
Action shot: giving this panda a surgery to remove the bloat in his tummy.

-
Farmer's Gerber and Alan K's workpro in silver looks really slick. Especially when folded.

-
<u>Day 6</u>
Breaking down some boxes this evening.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


