The December 2024 Utility Knife Challenge
-
I forgot to take action photos today. I used the fastback to remove the scales from this little Vic today. It also got used to free the scales from the packaging. First time installing brass scales on a Vic. This one makes me smile.
JonesE
Tbh I have been resisting to get the fastback driver cutter. But it is really attractive. Goes very well with a small plier like cobra xs or multitool like PST or bond.
Metal case/scale always make me smile. Good use.
-
-
Day 6
The STANLEY, even with the old blade, was assigned package opening duty to inspect a Christmas gift.
[attach id=0 msg=2507641]
I can only say, it was a CASE special request from a grandson in Sky Blue Bone!

-
@BPRoberts: I'm sure she'll like it!
@ReamerPunch: I lack the patience (and skill) needed to swap Velcro for snaps.
@AzteCypher: I haven't opened a package of napkins in a long while. I just use paper towels or a cloth napkin.
@kaevin: I like the little flash of yellow!
@LoopCutter: sky blue bone? I bet that's pretty!
Day 6
One great thing about utility knife blades is that they're very sharp. I used the silver topo EAB to prove that with a piece of receipt paper. It was a pretty one-sided deal (sorta like the Detroit Lions did to another team with a wildcat name).
[attach id=0 msg=2507659]
Utility knife record: 5-0.

-
Day 06
Fresh blades as needed is the major advantage of EDCing a utility knife.

-
Day 5 (forgot yesterday)
Put a new blade and switched to the Olfa.
Since when have Olfa blades been black oxide? The original blades in this knife were uncoated, as were its first box of replacements. My 9mm and this new pack (both from Lowe's this year) are black.
[attach id=0 msg=2507667]
![KIMG1196[1].jpg](/assets/uploads/_imported_attachments/migrated/577660_KIMG1196%5B1%5D.jpg)
-
@cody6268 said:
Day 5 (forgot yesterday)Put a new blade and switched to the Olfa.
Since when have Olfa blades been black oxide? The original blades in this knife were uncoated, as were its first box of replacements. My 9mm and this new pack (both from Lowe's this year) are black.
[attach id=0 msg=2507667]
Olfa and NT cutters are selling these "black coated" blades, advertising they are sharper.
https://olfa.com/blogs/professional/olfa-silver-vs-black-blades-which-one-is-for-youThe local paint workers here swear by black blades when they use scrapers that can mount utility blades to remove old paints from wall.
The orange color screams OLFA :D -
Day 7
Today, last of my "silver stainless steel utility blades". The Tajima LC-302 is similar but a little bit different in that it is a screw lock model. This is the first Tajima I bought after I have lost the original LC-301. But I have not adapt to screw lock type of cutters.
[attach id=0 msg=2507671]
Front[attach id=1 msg=2507671]
BackThe back has brand and model name as well as "stainless steel" stamped. Unlike the modern day LC-301 which has nothing on it.
[attach id=2 msg=2507671]
Parts[attach id=3 msg=2507671]
Back of parts



-
Continued..
[attach id=0 msg=2507674]
Back of sliderThis Tajima has stainless steel body and snappers. The slider is 3 pieces. A black plastic part, a brass screw and the dial is a lighter metal, which it seems to be aluminum to me. Removing the sticker will reveal the brass screw underneath, it is subtle enough that I want to keep this sticker on the dial.
It seems it would not be too hard to get a piece of brass drill two holes and put 2 pieces of screws onto it to make a truly all metal build. But I don't have a CNC.
When I was a teen, I used to assemble Japanese Gundum models, Tamiya 4WDs etc. Those weak plastic lock cutters or auto lock cutters sometimes do not hold the blade tight enough. Those are the only time I opt for a screw lock type of cutter. But in reality, I should have used a mini plastic saw instead of a cutter to "saw" through thick parts.
[attach id=1 msg=2507674]
Action shot: giving this panda a surgery to remove the bloat in his tummy.

-
Farmer's Gerber and Alan K's workpro in silver looks really slick. Especially when folded.

-
<u>Day 6</u>
Breaking down some boxes this evening.

-
Day 6
Used the scissors to trim a thread on my bandana. Standard Gerber scissors: Functional for light tasks. I rate them below most Vics but above the Wave style ones.

-
@Farmer X said:
@ReamerPunch: I lack the patience (and skill) needed to swap Velcro for snaps.It's much easier than it looks. Removing the Velcro took more time than installing the buttons. All you need for the buttons is a hammer and reamerpunch. Tiny anvil and punches come in the kit. A snap button is four parts. Two for male part, two for female part. You just peen them together.
-
Day 7
Had to break out my biggest fan. That's an auto retracting blade I found on the street.

-
<u>DAY 6</u> I still have the first Stanley I ever bought. I didn't have a lot of money to buy some basic tools, and so I bought the cheaper non-retractable version. That helped me to never lose it, because it' not a knife you carry around with you.
[attach id=0 msg=2507698]

-
Day 7
UPS delivered another box today? Saturday!
[attach id=0 msg=2507732]
Much larger. After inspection not my order, apparently ordered by a child so nosey kids will not know in their households. Now to determine which children???

-
Day 07
December was the perfect choice for this challenge with all of the packages that need opening. I've switched to the green Stanley model 10-079. This is a real, working utility knife that I'm not going to carry, but I don't mind using it at all. I had replaced this heavy, metal beast with a new, lighter Stanley in yellow and black plastic. The new one self-destructed when I was using it to cut up wet carpet. No kidding, parts just flew off of it. Thankfully, I still had the green beast to go back to.

-
Day 7
NO CAN OPENER! :ahhh (it's okay, there's a P-51 blurry in the background to use).
[attach id=0 msg=2507748]
Used the Lockdown Drive to snug up a lid on a crockpot, and then filed where the clip broke a little with the Pry.



-
@Alan K:

@Cody6268: the tractor looks European. Am I correct?
@ReamerPunch: no need for biggest fans here...my furnace has been getting a workout.
@Fireman: I think you got your money's worth out of that one!

@LoopCutter: did you solve the mystery?
Day 7
Like AzteCypher, I busted up some cardboard.
[attach id=0 msg=2507774]
This is a task that used to be done much more frequently. And it's ideal for a utility knife.
[attach id=1 msg=2507774]
Utility knife record: 6-0.
.jpg)
.jpg)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



