The December 2024 Utility Knife Challenge
-
Continued..
[attach id=0 msg=2507674]
Back of sliderThis Tajima has stainless steel body and snappers. The slider is 3 pieces. A black plastic part, a brass screw and the dial is a lighter metal, which it seems to be aluminum to me. Removing the sticker will reveal the brass screw underneath, it is subtle enough that I want to keep this sticker on the dial.
It seems it would not be too hard to get a piece of brass drill two holes and put 2 pieces of screws onto it to make a truly all metal build. But I don't have a CNC.
When I was a teen, I used to assemble Japanese Gundum models, Tamiya 4WDs etc. Those weak plastic lock cutters or auto lock cutters sometimes do not hold the blade tight enough. Those are the only time I opt for a screw lock type of cutter. But in reality, I should have used a mini plastic saw instead of a cutter to "saw" through thick parts.
[attach id=1 msg=2507674]
Action shot: giving this panda a surgery to remove the bloat in his tummy.

-
Farmer's Gerber and Alan K's workpro in silver looks really slick. Especially when folded.

-
<u>Day 6</u>
Breaking down some boxes this evening.

-
Day 6
Used the scissors to trim a thread on my bandana. Standard Gerber scissors: Functional for light tasks. I rate them below most Vics but above the Wave style ones.

-
@Farmer X said:
@ReamerPunch: I lack the patience (and skill) needed to swap Velcro for snaps.It's much easier than it looks. Removing the Velcro took more time than installing the buttons. All you need for the buttons is a hammer and reamerpunch. Tiny anvil and punches come in the kit. A snap button is four parts. Two for male part, two for female part. You just peen them together.
-
Day 7
Had to break out my biggest fan. That's an auto retracting blade I found on the street.

-
<u>DAY 6</u> I still have the first Stanley I ever bought. I didn't have a lot of money to buy some basic tools, and so I bought the cheaper non-retractable version. That helped me to never lose it, because it' not a knife you carry around with you.
[attach id=0 msg=2507698]

-
Day 7
UPS delivered another box today? Saturday!
[attach id=0 msg=2507732]
Much larger. After inspection not my order, apparently ordered by a child so nosey kids will not know in their households. Now to determine which children???

-
Day 07
December was the perfect choice for this challenge with all of the packages that need opening. I've switched to the green Stanley model 10-079. This is a real, working utility knife that I'm not going to carry, but I don't mind using it at all. I had replaced this heavy, metal beast with a new, lighter Stanley in yellow and black plastic. The new one self-destructed when I was using it to cut up wet carpet. No kidding, parts just flew off of it. Thankfully, I still had the green beast to go back to.

-
Day 7
NO CAN OPENER! :ahhh (it's okay, there's a P-51 blurry in the background to use).
[attach id=0 msg=2507748]
Used the Lockdown Drive to snug up a lid on a crockpot, and then filed where the clip broke a little with the Pry.



-
@Alan K:

@Cody6268: the tractor looks European. Am I correct?
@ReamerPunch: no need for biggest fans here...my furnace has been getting a workout.
@Fireman: I think you got your money's worth out of that one!

@LoopCutter: did you solve the mystery?
Day 7
Like AzteCypher, I busted up some cardboard.
[attach id=0 msg=2507774]
This is a task that used to be done much more frequently. And it's ideal for a utility knife.
[attach id=1 msg=2507774]
Utility knife record: 6-0.
.jpg)
.jpg)
-
-
Day 6: Switched to the Stanley.
My original Stanley 10-049 was from an old toolbox I inherited and identical to Loop Cutter's. Unfortunately, I lost it cutting weed eater string. I later found it around a year later, but the plastic guts became brittle and snapped. I think I paid $5 for this newer version secondhand--I know I told the seller a new one's $10 and a blade would cost me three bucks, so he came down in price.
I've noticed the newer imported blades don't get as sharp and don't hold an edge as well. They're also not stainless. I've got two Wharncliffe and one sheepsfoot I've been working on touching up. Unlike your snap-off or standard utility knife blades, I merely resharpen my collection of blades, and swap between them, as opposed to just toss 'em and get a new one.
Stanley also has an English made one that takes standard marking knife blades--thus, there's a HUGE variety of shapes it can take. Hard to find in the States cheap, however.
Lot of cutting today, but only got one of it peeling an orange.
[attach id=0 msg=2507779]

-
@Farmer X said:
@Cody6268: the tractor looks European. Am I correct?It's the Turkish-built Ford Cargo, sold in South America from '11-19. Matchbox has issued it a a ton of times--including three issues with trailers in Convoy. I bought this one earlier on in the year at Hobby Lobby for the dump trailer.
Personally, I wish they'd use the Western Star 49X more. Aside from a Western Star exclusive and a 9-pack issue, most have been sold with trailers. I got lucky and found the Shell set with the cab at O'Reilly Auto Parts a couple years ago, but so far, that's been it. Matchbox lost the Mack license a couple years back, and they don't use the International or Freightliner license enough for Convoy trucks. A Freightliner eCascadia electric truck was supposed to come out this year, but so far, not yet.
PS: Nationally, Convoy is only found at O'Reilly Auto Parts and Hobby Lobby.
-
Day 8
Today it is not the same stainless steel cutters, but still an A sized utility cutter.NT cutter S-202P
This is a classic triangulae screw lock model. I used to have one in olive and black as a teen. This one is black contrasting the brass knob. The body is bent from a piece of iron sheet and painted. Slider mainly made from black plastic. Snapper and clip (really small considering the size of this cutter) are plastic as well.
For this one I bought it liking the gold and black look. Changed the blade to 3M ti coated (gold color). And it looks great this way.
The blade cannot be flip mounted, which is expected.
[attach id=0 msg=2507802]
Front[attach id=1 msg=2507802]
Back[attach id=2 msg=2507802]
In original packing[attach id=3 msg=2507802]
Original blade



-
Continued
[attach id=0 msg=2507803]
Parts[attach id=1 msg=2507803]
Back of parts[attach id=2 msg=2507803]
With blade drawed outNothing much to add to this model except black gold combo works very well.



-
@kaevin - I like this one of yours the best. The black and gold work very well together.
<u>Day 7</u>
EAB got used a lot today but only caught a few pics.
Used it to open a bag of dog food for the neighbor's doggos that we're watching while she's out of town.

Mail call!!!

I couldn't for the life of me get my grubby fingers to take the plastic wrapping off the this candy cane. Nothing the EAB couldn't help me sort.

-
@AzteCypher said:
@kaevin - I like this one of yours the best. The black and gold work very well together.
...I have enough small cutters to use till I die I guess. But I can't resist getting this one. Only thing that is bad about it is the INSIDE of the body isn't painted.
-
Day 8
No brand snap-off. Found it somewhere.

-
Action shot cutting double sided tape for daughter to stick something to her textbook.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

