The December 2024 Utility Knife Challenge
-
Day 8
Used the Gerber tool to slice open a case of 8oz water bottles.
Partial blade exposure was all that was required. Avoided slicing any bottles open too!
[attach id=0 msg=2507847]

-
Day 08
You're opening cases of water wrong. I recently discovered this myself, but it is one of those life changing hacks that you wonder why you hadn't done it before. Find the middle of the case and cut up the sides between the bottles, then cut across the top, then put your fingers under the bottom middle of the case and lift it up. The plastic across the bottom acts as a hinge and the case of water or whatever you're drinking opens like a book. All of the bottles are easily accessible but remain contained by the plastic. I'm OCD, so of course I use all of the bottles in one side of the case first and then cut that side off and throw it away when it's empty before I start on the other side. :ahhh
-
@Alan K.
Yes, that is a great way to open and contain a 24 pack of the same size bottles in a single tier.My package this morning was a double tier case of 8oz bottles, with a card board platform between each tier. 24 / tier, 48 bottles total.
I do have a 36 count package of 16oz bottles, May check if that may work. The possible issue could be because bottles are staggered the plastic wrap integrity may not hold the bottles together.
-
Day 8
Guest post by my friend's Blick knife. [attach id=0 msg=2507893]

-
@JonesE: the coyote tan is kinda growing on me...
@Cody6268: Turkey, eh? I was observing two other mechanics work on a Transit Connect, and I happened to look at the VIN. I didn't recognize the world identifier, so I looked it up. Seeing that the little thing was made in Turkey was a surprise.
@kaevin: that's an interesting design. How are the ergonomics?
@AzteCypher: hope the neighbor's pup likes you okay!
@ReamerPunch: it's amazing what you can find, and where you find it, eh? The small slip-joint pliers I found were worth far more than the five seconds it took to realize what they were and pick them up.
@Fireman: love those two!
@LoopCutter: I don't blame you. Chucky is an odd little booger.
@Alan K: I'll try that the next time I open a case of bottled water. And I can be a little OCD, too.
@BPRoberts: that's an interesting one!
Day 8
Knives and multis that don't come in boxes, don't include a sheath, and won't fit in a knife roll get wrapped in a piece of old clothing. The silver EAB was used to cut just such a thing.
[attach id=0 msg=2507894]
In the second photo, the black EAB is wrapped up in its "storage rag." These were cut from old pajamas.
[attach id=1 msg=2507894]
Utility knife record: 7-0.
.jpg)
.jpg)
-
@Farmer X said:
@kaevin: that's an interesting design. How are the ergonomics?Actually the triangular shape increases the grip area, which is better than the slick stainless steel ones I shared before. And the screw lock is not too hard to move the blade, just push the dial top forward and it will loosen. After a while it is not too hard to deploy one hand.
-
Day 9
NT cutter A-300GR[attach id=0 msg=2507898]
Front[attach id=1 msg=2507898]
BackNT cutter claims it's white plastic handle A-300 https://www.ntcutter.co.jp/en/products/detail/328 as world's best selling ever cutter. And this A-300GR is the auto-lock metal version of it (There is a plastic auto lock A-300R). The main body is made from 2 parts. A stainless steel core part which is similar to A-1P, and an aluminum die casted outer part riveted together. The rivet also serves as a point to stick to magnetic holders. The slider and snappers are made from black plastic. It comes with normal 58 degree carbon steel blade, but I have replaced it with stainless steel version since COVID. At that time after opening every letter and package I will spray with alcohol and caused the oil to wash away and rust on original blade. This is the second of this model I have owned. The first being confiscated at airport, being forgotten in my pen case. The first thing I do after return is to buy another of this model. It is how good it is.
[attach id=2 msg=2507898]
Parts[attach id=3 msg=2507898]
Back of parts



-
Continue
[attach id=0 msg=2507899]
Flipped mountingThe body has a substantial weight and quality feeling in it, and is very pleasant to hold due to it's thickness and small curve. When cutting thick materials with index finger pressing against the top, the added thickness at the top takes the pressure away. The bottom features some tiny dots which adds grip to the otherwise smooth body. The blade can be flip mounted for left hand user as well.
[attach id=1 msg=2507899]
Bottom grip areaThis model is often recommended for someone looking for a "quality cutter" as it is not expensive and when people prefer metal bodies to plastic. It is easy to find in local store as well. Due to it's popularity, NT cutter later released a lot of "premium" versions of it in different color way or paired with other blades, like the all black premium "PMGA-EVO2" https://www.ntcutter.co.jp/en/products/detail/388 or the red-black premium "PMGA-EVO1"https://www.ntcutter.co.jp/en/products/detail/367". Based on the A-300GP they also released a elongated version with quick return SA-400GRP https://www.ntcutter.co.jp/en/products/detail/255 (I have yet to find it in a local store).


-
Day 7:
Removed the hanger from a felling wedge. Honestly, I prefer the better ones that don't have these hangers, buut you don't see them brick and mortar that often.
The Klein locks in this position as well as fully open. I suspect that this is designed for skinning cable, but it gives a lot more leverage. The plastic on these Husqvarna wedges is harder than the Stihl ones I normally use.
[attach id=0 msg=2507903]

-
Day 8
The fastback and I did some chores around town today. In the afternoon we did some yard work and then worked in the garage for a bit. This afternoon I found a few utility knives hidden in a couple of tool boxes, so this coming week I will rotate them into the daily carry. I figured you all are getting tired of my fastback. Anyway, today’s pic is my trusty fastback with another fastback I have.
JonesE
-
Day 9
Engineer pliers in Orange!

And a freebie Hello Kitty ziplock bag.
The Fiskars mini utility knife... well, it sucks. Very heavy, very long, too thick. The blade holder has play in both opened and closed positions.
If you want a small folding utility blade, get the Gerber EAB or something similar.
-
@ReamerPunch said:
Day 9Engineer pliers in Orange!

And a freebie Hello Kitty ziplock bag.
The Fiskars mini utility knife... well, it sucks. Very heavy, very long, too thick. The blade holder has play in both opened and closed positions.
If you want a small folding utility blade, get the Gerber EAB or something similar.I like those engineer pliers, first time to see an orange one and it comes with a matching cover!

-
Disappointed to hear about the Fiskars Mini Utility Knife because I like the looks of it. I guess you really have to be mindful of the intended end user of something like that before you buy it. The Fiskars Mini is obviously meant for crafters and not anyone who is going to beat the hell out of it cutting up boxes, cutting shipping wrap off pallets or stripping cable all day.

-
Dozed off before I could do my posting yesterday.
<u>Day 8</u>
Just a few tasks to get done around the house, such as opening up a new package of paper plates.

Opening up a present for the wife.

Used the EAB as a thin flat edge to get the burned out bulbs out of this candy cane strand. Still have two more strands to do today.

-
Day 9
Got a Stanley utility knife with me today. The model is a 10-779 Dynagrip. I picked this one up sometime in the mid 90s. This one is a made in the U.S.A. model. I did a Quick Look and surprisingly it is still in production, but like all things Stanley Black and Decker, now made in China.
When I found it yesterday while cleaning the garage, I must have put it way in a hurry. It was pretty filthy. So last night I disassembled it and gave it a through cleaning and got rid of the years of accumulated guck. I found the blade was still a Stanley blade, so I swapped it around putting the fresh edge forward. Not surprisingly, I didn’t have any spare blades in the handle.
In looking over the Stanley, I was happy to enjoy how ergonomic it is since it has been a very long time since this one has seen the light of day. The yellow paint makes it very easy to find and the rubber inserts give it a sure grip with wet or oily hands. This one is not the smoothest with retracting and extending the blade. I noticed that the interior of the knife is painted the same yellow as the exterior. The more I use it use it the it is becoming easier to deploy the blade. It is starting to wear down the paint in the blade channel. I am amazed at how thick the paint is on this knife.
I know some of you have been posting your Stanley utility knives and I have enjoyed seeing them. If you have an old Stanley, please post it. I would like to see it.
-
DAY 9 Another old Stanley that lives in my truck.
[attach id=0 msg=2507958]

-
Day 09
The green beast again. USA made 10-079 used it today to slash open another package.

-
Day 9
No knife action today.
My 3 were handy and within reach.
[attach id=0 msg=2507989]

-
Day 9
Replaced a cover plate. Not super thrilled with the driver. It's hard to deploy, doesn't lock in position well, and it's off the centerline, which makes it awkward to use. It does detent at 90 degrees, which is probably the better position for it.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

