The December 2024 Utility Knife Challenge
-
Day 10
Diabetic hack. I used the WorkPro to cut out the no-drip spout from this detergent bottle and et voilà, I have a new sharps disposal container for used needles and lancets that will last me for the next four to six months.

-
-
Of course, I'm not a part of this challenge. Just reading and enjoying. Curiosity led me to get my ancient Stanley out for a look. I had an old one that had a fancy design on the handles, but I let a friend have it years ago. This is the only one I have left. Good thing I cleaned it up some. It was pretty sad before. Blades are in the handle, naturally. Still works but blade changes take a little while. Can't exactly put it in your pocket either, since the blades don't retract. Tool belt or bucket was the idea. Best wishes. G
:o [attach id=0 msg=2508087]
-
@Cody6268: I hear you on the old tooling. Never mind that consumables for model kits have gotten insanely expensive. I'm pretty well done with that hobby.
@AzteCypher: you sure had some good surprise box picks!

@kaevin: I see the resemblance, and I never knew what that little dude was called. Thanks for enlightening me!
@ReamerPunch: fantastic work!
Let's see what AzteCypher comes up with and put it to a vote.@Alan K: that's a pretty good hack. I had a job doing vendor-managed inventory of phlebotomy supplies. I imagine those sharps containers weren't exactly cheap.
@JonesE: I like that bright yellow!

@IMR4198: an oldie but a goodie!
Day 10
One should be able to change a utility knife blade with common hand tools (or no tools at all) and without consulting the manual. The EAB fits those bills. Just remember that the screw will come out, so don't lose it! The MiniChamp screwdriver was a little small, but it got the job done.
[attach id=0 msg=2508088]
A Stanley blade was put in the silver EAB, while the black one got a DeWalt blade. This will present some good opportunities for test and evaluation. The originals are still good, so I'm keeping them in reserve.
[attach id=1 msg=2508088]
Utility knife record: 8-0.
.jpg)
.jpg)
-
Day 10:
Not a lot going on.
[attach id=0 msg=2508090]
Basically, the only thing I accomplished was returning a TV antenna to Walmart and buying a PS5 Dualsense to replace the kind of battered Xbox One controller I had for about four years and mostly used with things like Flight Simulator, BeamNG, and American Truck Simulator.
I like the feel much better, and I fell in love with the basic PS layout over a decade ago when I picked up my PS2. The trigger and buttons are so much smoother and more precise. Only problem is that, so far, only American Truck Simulator has native support for the controller. I found that in Flight Simulator X, it worked more or less as a supplemental to the Xbox controller.
[attach id=1 msg=2508090]


-
Day 10
I passed my Rebar along as a "something old" for a wedding, and took advantage of the Black Friday deals to replace it.

-
Day 11
NT Cutter A-1000RP
[attach id=0 msg=2508093]
Front with the standalone triangular snapper[attach id=1 msg=2508093]
BackIt is obvious after A-500RP, is A-1000RP. Basically, it in terms of working mechanism they are essentially the same. The body is made from die cast aluminum, painted slick silver. The outline is straight lined and minimalistic. The number of gripping "hole" patterns at the top and bottom is less. The spring in the body is somehow yellow/brass-ish looking. I am not sure about the material used.
[attach id=2 msg=2508093]
Top[attach id=3 msg=2508093]
Bottom



-
continue
[attach id=0 msg=2508094]
Parts[attach id=1 msg=2508094]
Back of partsI have changed the original blade to stainless steel ones as it is mostly sit in a box and I don't want to leave the blade to rust.
[attach id=2 msg=2508094][attach id=3 msg=2508094]
In original packingCompared to A-500RP, it is heavier with more refined (?) outline. It is cold to touch. The paint is superb and hence I don't want to scratch it, which is mostly the reason it is still sitting in the box unlike the A-500RP. The slick paint also makes it more slippery, but not too slippery that lead to issue. Seeing the A-500RP being discontinued and A-1000RP still relatively easy to find, things may get changed and I may carry this more often.




-
Continue
[attach id=0 msg=2508098][attach id=1 msg=2508098]
A-1000RP (top), A-500RP (middle) with MUJI Sliding eraser (MUJI version of Clic Hypereraser OEM by Pentel)

-
@ReamerPunch said:
I hope AzteCypher does not mind me jumping in.
I like the black and the blue.The black and top blue are nice.
Some of them looks like a Mt Fuji badge when it is small
-
I did the badges at work. But don't tell anyone.

Day 11
Engineer PZ-58KN in limited blue!

Goes nicely with the orange.And the Gerber EAB. Probably the best, most rugged mini folding utility knife.

-
Day 10
No use today.
Losing with my cap.
[attach id=0 msg=2508120]

-
-
Day 11
I slid this unmarked box cutter in my shirt pocket this morning and used it to open bags of mulch.


-
<u>Day 10</u>
Playing catch up.
Using the EAB to remove the stitches on a pocket from my new coat for my sister-in-law's upcoming wedding.

-
<u>Day 11</u>
Using the EAB to open up a bag of sweet treats. The holidays are harder for me since everyone's baking cookies, cakes, and pies, and I have a bad sweet tooth.

-
-
Day 11
No blade action today.
With lull, I opened the handle to examine my spare blade. Since it is a wharncliff shape I swapped blades.
[attach id=0 msg=2508199]
[attach id=1 msg=2508199]
[attach id=2 msg=2508199]


-
@cody6268: I think I see a First Gear fire engine on the shelf!

@BPRoberts: I also passed a Rebar on to a new owner...but it's been largely replaced by an ST300.
@kaevin: the A-1000RP looks pretty good!
@ReamerPunch: sweet pliers!
@Alan K: I have a similar cutter that'll make an appearance before the challenge ends.
@AzteCypher: I bet those are good!
@JonesE: quiet days are fine by me!
@LoopCutter: that black oxide PST...

Day 11
The first round of compare and contrast got underway this evening. Our test subject is receipt paper. The Stanley blade did a good job, but the DeWalt did even better. I was expecting them to be evenly matched, so the end result was a bit of a surprise.
[attach id=0 msg=2508215]
Utility knife record: 8-0.
Stanley record: 0-1.
DeWalt record: 1-0.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

