The December 2024 Utility Knife Challenge
-
Cody, I've been shaving with safety razors for years, and to think I've been throwing the blades away when they got too dull to shave with. That tool seems like a great idea and I'm now going to have to hunt one up. How does it retain the blades? Safety razor blades are available on Amazon for as low as 100 for 10 bucks (or less sometimes) by the way.

-
The Sharpmaker is great at taking knives with intact, but dull, edges and making them very sharp. It is not as great with damaged or non-existent edges. I'm hoping the new stone will help with that. Thus far, I've had great success with using a coarse diamond stone to put a basic edge on when needed and then finishing with the Sharpmaker.
I like that it is more or less idiot proof (I am a passable, but not great, freehand sharpener), but the real reason I got it over a Lanksy or something is that it has the appropriate tools and instructions to sharpen basically anything. I've done knives, kitchen gadgets, scissors, and all sorts of things on it. Plain edge, serrated, 50/50, doesn't matter. If I only wanted to do knives, I think I'd be better off continuing to practice freehand sharpening and putting the money towards nicer stones. But being able to bring a potato peeler back from the dead and keep using it instead of replacing it AND also easily do the final sharpening on my knives is a great combo.
Day 12
How do all the people who don't carry pocket knives drink their coffee with these tiny vent holes?

-
-
@Farmer X said:
@ReamerPunch: a cool and interesting group of coins! (I could probably send a few American ones if you'd like.)I've got a bunch of American coins. Even dollars and half dollars. They're great!

-
Chose a knife a bit out of the ordinary--the Valet Auto Strop Razor Utility knife advertising Cudahy Packing Co. Kind of a multitool as well, as it has a tape slitter and cigar cutter built in. also weighs near nothing and is paper-thin.
If I'm not mistaken, it's one of the first utility knives ever marketed. It takes a single-edge razor blade WITHOUT the reinforcement. These were marketed as a way to get more use out of blades too dull to shave with. Finding replacement blades isn't easy. A few companies (i.e. Feather) do, but they're hard to find. Besides, I think the included blade was the original Valet, so I've left it in as to preserve it. I sharpened it up to the best of my abilities. Whatever steel Valet used was amazing stuff.
I'm not exactly sure of age. The Auto-Strop line was produced between 1901-1946. The "Auto Strop Razor" trademark was first used in 1919, and the company had a merger with Gillette in 1930. So, there's a good chance this is 100 years old.
And the company advertised. They were, at one point, huge. Heck, they were one of the first S&P 500.
[attach id=0 msg=2508276]
Love this. I have been using DE blades, I think there are similar knife that loads DE blades. Always want to get hold of one of those.
-
Day 13
Tajima DCL500AYCL (L500 DCL and AYCL are color model and color code).
As seen from my collection, I seldom buy (if any) L size cutters. But since recently moving and also doing this challenge, I come to revisit the only L-size cutter I owned. It is a Chinese brand plastic handle (with metal rail). I have only used it a few times and I frown every time. So I got this Tajima (Japanese brand Chinese made).
[attach id=0 msg=2508295]
New in the box[attach id=1 msg=2508295]
Opened the box with the old L size, side by side[attach id=2 msg=2508295]
Front[attach id=3 msg=2508295]
BackAfter unboxing, before use, a plastic film on top of the blade needs to be pulled and remove. It actually is used to keep a few drops of oil between the blade and itself to keep the blade from rusting before it is sold.
The body is made with light smooth plastic. And it is covered on the edge as well as the back, making it very ergonomic to hold. This particular color way is a sharp neon yellow green or similar to Oakley retina burn (if you own a pair of Oakley you know what it is).




-
Continue
The main special feature is the slotted driver edge at the tip. Tajima claims they have heat treat to harden it for multiple uses, e.g. as a slotted driver, opening cans of pains, and cutting card board or tapes.
[attach id=0 msg=2508296]There is also a hole in the metal part of the body for attaching lanyard. The main target for this cutter is renovation workers or construction workers who needs to cut wires, tapes, opening paint cans, tightening screws etc. And it is why the slider features a big circle recess and the curved lines on it for adding traction when used with a glove. Lanyard is also important when they work from height or on a ladder. And this model does not have any build in snapper and assumes the user will carry around a plier at the same time.
[attach id=1 msg=2508296]
Front of parts[attach id=2 msg=2508296]
Back of partsThe blade it comes with is a "black blade" as well. They claim it uses Japanese tampering technique (that screams to me it isn't made in Japan) and is "rock hard" with multi-step sharpening.
This model is auto lock without any screw lock in the front. It also does not have any stabilization feature for stabilizing the blade tip. By no means it is meant for precision work, but rather a versatile cutting tool for use in the field. Tajima also made a similar newer model with a "fin" at the end of the body (Dora Fin). But I think that will get in the way when pocketing it so I opted for this one instead. I am very happy to replace the old Chinese branded cutter with this one although I seldom do any heavy work. Most likely it will be used for opening cans, sealant or liquid nails, for which I don't want to make my better blade messy and A-size light duty cutter will not be tough enough for the job.



-
<u>Day 12</u>
Had mail call and donut duty today. I preferred donut duty.


-
Day 12
Another day I stayed home. Temps in low 20s and wind chills in minus range.
No place needed to be or supplies to fetch, so put of till tomorrow.
Studied the Gerber, kinda thinking what I could pry…
[attach id=0 msg=2508299]
-
Day 13
Tajima LC-301 helping wrap presents.


-
Curved becomes covered, can of paint becomes can of pain. My English teacher's effort is in vain.

-
@ReamerPunch said:
Day 13Tajima LC-301 helping wrap presents.
Helpful little christmas pixie

-
Action shot
Nylon rope keeping the door opened is frayed. Pigtailing it and cut with the Tajima.

-
I didn't realize how big the Tajima was. It seems massive!
-
Day 13
"Oil The Joints!" as it says on British Army Knives. No use today, but a little maintenance seemed in order.

-
@BPRoberts: I have no idea.
@JonesE: a dynamic duo indeed!
@ReamerPunch: I now wish I'd saved some coins from the countries I visited during deployments (Australia is among them). Somewhere I have a five dirham note from the UAE lying around.
@kaevin: it would be hard to lose that neon yellow Najima!
@AzteCypher: I'm right there with you. What little mail I get anymore is almost invariably shredder fodder.
@LoopCutter: much the same here. I eagerly await the promised slight warm-up tomorrow.
@Alan K: never a bad idea!
Day 13
The cold has sapped most of my energy, so just a glamour shot for today.
[attach id=0 msg=2508374]
Utility knife record: 9-0.
Stanley record: 1-1.
DeWalt record: 1-1.
-
@Alan K. said:
Cody, I've been shaving with safety razors for years, and to think I've been throwing the blades away when they got too dull to shave with. That tool seems like a great idea and I'm now going to have to hunt one up. How does it retain the blades? Safety razor blades are available on Amazon for as low as 100 for 10 bucks (or less sometimes) by the way.
There are two nubs that hold the notches in a single edge razor blade. Combined with the friction from the spine/blade frame, they hold the blade in place. Takes some force to get them out, so it should be pretty hard to dislodge. A lot tougher than the other one of the era, the Gits Knife.
-
Day 12:
I was suppposed to finish cleaning up the basement in preparation for an new washing machine tomorrow. Ended up sitting on the old couch I had down there watching TV most of the afternoon after I got home from buying said washer.
So, to put things short--I hope the delivery guys show up late.[attach id=0 msg=2508381]

-
<u>Day 13</u>
Just a glamour shot today unfortunately.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
