The December 2024 Utility Knife Challenge
-
Continue
The main special feature is the slotted driver edge at the tip. Tajima claims they have heat treat to harden it for multiple uses, e.g. as a slotted driver, opening cans of pains, and cutting card board or tapes.
[attach id=0 msg=2508296]There is also a hole in the metal part of the body for attaching lanyard. The main target for this cutter is renovation workers or construction workers who needs to cut wires, tapes, opening paint cans, tightening screws etc. And it is why the slider features a big circle recess and the curved lines on it for adding traction when used with a glove. Lanyard is also important when they work from height or on a ladder. And this model does not have any build in snapper and assumes the user will carry around a plier at the same time.
[attach id=1 msg=2508296]
Front of parts[attach id=2 msg=2508296]
Back of partsThe blade it comes with is a "black blade" as well. They claim it uses Japanese tampering technique (that screams to me it isn't made in Japan) and is "rock hard" with multi-step sharpening.
This model is auto lock without any screw lock in the front. It also does not have any stabilization feature for stabilizing the blade tip. By no means it is meant for precision work, but rather a versatile cutting tool for use in the field. Tajima also made a similar newer model with a "fin" at the end of the body (Dora Fin). But I think that will get in the way when pocketing it so I opted for this one instead. I am very happy to replace the old Chinese branded cutter with this one although I seldom do any heavy work. Most likely it will be used for opening cans, sealant or liquid nails, for which I don't want to make my better blade messy and A-size light duty cutter will not be tough enough for the job.



-
<u>Day 12</u>
Had mail call and donut duty today. I preferred donut duty.


-
Day 12
Another day I stayed home. Temps in low 20s and wind chills in minus range.
No place needed to be or supplies to fetch, so put of till tomorrow.
Studied the Gerber, kinda thinking what I could pry…
[attach id=0 msg=2508299]
-
Day 13
Tajima LC-301 helping wrap presents.


-
Curved becomes covered, can of paint becomes can of pain. My English teacher's effort is in vain.

-
@ReamerPunch said:
Day 13Tajima LC-301 helping wrap presents.
Helpful little christmas pixie

-
Action shot
Nylon rope keeping the door opened is frayed. Pigtailing it and cut with the Tajima.

-
I didn't realize how big the Tajima was. It seems massive!
-
Day 13
"Oil The Joints!" as it says on British Army Knives. No use today, but a little maintenance seemed in order.

-
@BPRoberts: I have no idea.
@JonesE: a dynamic duo indeed!
@ReamerPunch: I now wish I'd saved some coins from the countries I visited during deployments (Australia is among them). Somewhere I have a five dirham note from the UAE lying around.
@kaevin: it would be hard to lose that neon yellow Najima!
@AzteCypher: I'm right there with you. What little mail I get anymore is almost invariably shredder fodder.
@LoopCutter: much the same here. I eagerly await the promised slight warm-up tomorrow.
@Alan K: never a bad idea!
Day 13
The cold has sapped most of my energy, so just a glamour shot for today.
[attach id=0 msg=2508374]
Utility knife record: 9-0.
Stanley record: 1-1.
DeWalt record: 1-1.
-
@Alan K. said:
Cody, I've been shaving with safety razors for years, and to think I've been throwing the blades away when they got too dull to shave with. That tool seems like a great idea and I'm now going to have to hunt one up. How does it retain the blades? Safety razor blades are available on Amazon for as low as 100 for 10 bucks (or less sometimes) by the way.
There are two nubs that hold the notches in a single edge razor blade. Combined with the friction from the spine/blade frame, they hold the blade in place. Takes some force to get them out, so it should be pretty hard to dislodge. A lot tougher than the other one of the era, the Gits Knife.
-
Day 12:
I was suppposed to finish cleaning up the basement in preparation for an new washing machine tomorrow. Ended up sitting on the old couch I had down there watching TV most of the afternoon after I got home from buying said washer.
So, to put things short--I hope the delivery guys show up late.[attach id=0 msg=2508381]

-
<u>Day 13</u>
Just a glamour shot today unfortunately.

-
Day 14
Opening presents.
The Knipex Cutex is quite nice.
-
@ReamerPunch said:
Day 14Opening presents.
The Knipex Cutex is quite nice.I've been eyeing on it and want to get one. But the price is very Knipex😅
-
Day 14
HMM Utility Knife (Taiwanese made in Taiwan)
[attach id=0 msg=2508395]
FrontI got hooked to stationaries some time ago. And one of the online stationary store I followed listed this beauty. Needless to say, I ordered one once they were available. The cheap Chinese L size cutter is the first L size I own (don't know who left it at my home), and THIS is the first I bought.
This model comes in 3 colorways. "Silver" , "Black" and "Olive with brass dial". I would have picked a black and brass, but there is no such combination, so I go for the Olive and brass.
From the look it looks like a dial type cutter. But it actually is autolock and the dial can be tighten to lock it harder.
[attach id=1 msg=2508395]
Back[attach id=2 msg=2508395]
Ruler detached, the middle are two magnets holding the ruler.The main body is made with aluminium, the slider and dial are made from brass. The blade included is an Olfa excel black L size. The back has a steel ruler attached with magnet. The ruler is slightly curvred at one side to protect the fingers when cutting with it. If the ruler is taken off, the main body can be sticked to a steel surface. However it cannot stick to steel with the ruler attached. The ruler has a small slit on it, which can be used as a snapper.
[attach id=3 msg=2508395]
Ruler as a snapper



-
Continue
[attach id=0 msg=2508396]
This knife feels solid and substantial. Although its outline is quite straight, it is easy to hold, especially with the curved back of the ruler. The auto lock click is crisp and satisfying.[attach id=1 msg=2508396]
PartsTo change the blade, the dial has to be removed totally the slide the blade out.
[attach id=2 msg=2508396]
Together with another brass dial cutter


-
Continue
[attach id=0 msg=2508397]
[attach id=1 msg=2508397]
Packing with detailed instructions. The box is made from cardboard sticked and stacked together.I think this HMM Utility Knife is well designed and target towards more to the edc and craft market. The knife as well as the packaging are well executed. It is an art piece that will be appreciated.
[attach id=2 msg=2508397]
Carrying on handHope you enjoy this entry as much as I like this utility knife.



-
the straight edge with ruler markings. 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login