The December 2024 Utility Knife Challenge
-
Day 14: slapped in a new blade and cut up a bunch of boxes that I'd thrown out of my closet and basement.
Also started digging out my Star Trek figures--since I started watching the series for the first time. Got them early on when I first got into action figures 7-8 years ago due to the fact they're cheap, but quality. They're probably worth less than they sold for new. I know I have Yar and Crusher--plus Worf around here somewhere. Got a long list I plan to get.
I hear Nacelle got the license--let's see if they can top Diamond Select in quality, and Playmates in variety. But, at about $30, definitely slightly high-end compared to my budget. However, if it's anything like the stuff I've seen at my Walmart (like Biker Mice from Mars)--the quality should be amazing.
[attach id=0 msg=2508617]

-
@LoopCutter: spiffy Tribal Lock! And I guess all the scratchers were duds?
@Fireman: hope you're feeling much better by now!
@JonesE: much the same in Michigan...sunlight is a bit of a rarity.
Fantastic work by awl!

Now for some public service announcements. I am thinking there might be a giveaway for those who complete this challenge. (It'll be contingent upon my ability to find the intended prize.) And we shall be voting on the badge design soon.
Day 15
Under normal circumstances, this Hot Pockets box would have been chucked directly into the trash. But this is a challenge, and testing of the two brands of blade is in order.
[attach id=0 msg=2508619]
We have a very clear winner here. While the DeWalt blade cut cleanly, the Stanley left jagged edges. That should be apparent in the photo below. The Stanley also hung up a time or two. No such difficulty was noted with the DeWalt.
[attach id=1 msg=2508619]
Utility knife record: 11-0.
Stanley record: 1-3.
DeWalt record: 3-1..jpg)
.jpg)
-
Day 16
NT cutters D-400GP
This metal precision knife from NT I think is high grade of NT pen type cutter with D-400 being plastic. NT cutter also make a slim knife DS-800P and a double ended D-1000P, which has 1 blade side and a needle side. I bought it like 8 years back when my wife bought me a Bandai Real Grade Zaku as a birthday gift. But never got it finished ever since my daughter is born.
The D-400GP has a smooth aluminum body, metal (I think is steel) grip knurling that also is the part gripping the blade. Includes a pack of 5 blades and a cap. It can use blades snapped off a type A light duty blade as well. The center of gravity lends more to the bottom to provide a stable grip.
With all made in Japan goodness and precision.



-
Continue
The duty is from my son's request. One of the wheels of his Lego breaks off and there he goes screaming with tears (as a 3 yo should).
Some Aaron Alpha with a clamp. The wheel is now stuck and cannot rotate. After a surgery with D-400GP, the wheel can now rotate (with some increased fiction). Some ability is better than lossing all the ability, my son agreed.



-
Great save Kaevin. Looks like your son will be enjoying his car again.
JonesE
-
Day 16
My auto-retracting blade doing what it does best.

-
Day 16
Rainy and Gloomy here today.
A landscape backdrop selected to enhance things that cut.
The Stanley takes center stage with two other favorites.
[attach id=0 msg=2508663]

-
Day 16
More package opening with the Green Beast.


-
<u>Day 15 - Catch up</u>
Used the EAB to open up dinner last night.

-
<u>Day 16</u>
Mail call and package duty today. Nothing special unfortunately.


-
This is my submission for the utility badge. Unfortunately it doesn't match up with Farmer X's design idea as I feel that ReamerPunch executed it perfectly. But, I do enjoy designing these so here are my ideas, though I realized now I didn't do one in black.



-
Day 16
Kinda skeptical about this one, the Prybrid X. It's nearly the size of a 91mm SAK but, even charitably, has like half the tools. On the Lockdown's the small xacto blade was a way to cram the blade into less space, and is complimented by a full sized "regular" knife. But I don't think the space savings here are worth it being the only blade. I'm a little skeptical of the pry function's durability as well.
Still, it did do the one thing I asked today, cut tape, and it is OHO, so that's something.

-
-
It was a gloomy day here, too. And a big thanks to AzteCypher for his badge design! We'll start the official vote tomorrow. And y'awl are doing great, as usual!

Day 16
I'm utterly spent and drained (turns out I cranked the thermostat up a little too much). This is all I have the energy for tonight. Regular MTo'ing should resume tomorrow.
[attach id=0 msg=2508707]
Utility knife record: 11-0.
Stanley record: 1-3.
DeWalt record: 3-1.
-
Day 15: Not a lot going on...
[attach id=0 msg=2508711]

-
@AzteCypher said:
This is my submission for the utility badge. Unfortunately it doesn't match up with Farmer X's design idea as I feel that ReamerPunch executed it perfectly. But, I do enjoy designing these so here are my ideas, though I realized now I didn't do one in black.



I am very sorry to have jumped in after Farmer X asked you to design the badge. I was at work and bored and I thought I could save you the trouble.
But you did a great job.
Day 17
I really like this one:

-
Also got an Engineer PZ-58 in limited black.


-
@ReamerPunch said:
Also got an Engineer PZ-58 in limited black.
Glad to know I am not the only one bitten by a plier bug.
-
@ReamerPunch said:
I am very sorry to have jumped in after Farmer X asked you to design the badge. I was at work and bored and I thought I could save you the trouble.
But you did a great job.
Day 17
I really like this one:
I have samekind utility knife ( Stanley 99E), but only drawback on this model is that you need to unscrew it to change blade but you can store blades in it
-
Day 17
Toughbuilt 5-in-1 Folding Utility Knife TB-H4-12-IM
[attach id=0 msg=2508736]
Front, the plate is plastic[attach id=1 msg=2508736]
Back with clip, the plate is metal (steel?)I got this TB utility knife a few months ago. It is very capable and solid. It is mostly made from metal, with one side being high quality plastic. The paint is beat up on mine, and I have replaced the original double ended bit with a vessel one (65mm) and grinded down the slotted side to make it 60mm.
[attach id=2 msg=2508736]
Blade (original) having touched up with a diamond file on one side after dulled. The blade only lock closed and fully openedIt includes a blade (with wire cutter notch), a bit holder with magnet that can accommodate up to 60mm long bit when folded, including a double end PH2 and slotted and a pry bar. It also includes a metal clip on the back, and a blade storage for 2 blades with magnet.
[attach id=3 msg=2508736]
Bit driver is centered, which is a huge plus over the Milwaukee and alike. It only locks closed or fully opened, would be great if it can lock at 90 degree. Be careful if you intend to use it with a bit extender, if it is a normal full "hex" extender, I have had the magnet attracted to it and pulled out when remove the extender. No issue if you use a smaller one like the Leatherman (ratchet) extender. You can also pull it out, epoxy and put it back as well.



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
