The December 2024 Utility Knife Challenge
-
-
Day 20
Pizza pie and EAB

-
@ReamerPunch said:
Olfa CTN-1Nice! And the blade has 5 snap off sections!
-
Day 20
Loopcutter is right. These are great lotto scratchers.

-
Is that a winning ticket? I don't know how to read the things. Best wishes. G

-
Day 20
[attach id=0 msg=2509180]
Inspected the Gerber, to determine how to exchange the blade!
The slide movement is not smooth. Sticky to deploy and nearly impossible to retract. Required pliers to coax the mechanism back.
I will not carry.
And, yes the blade slide is well lubricated.
Gerber would have been wise to line the slide with thin teflon strips or such. The mech is a pain!
-
@BPRoberts said:
Day 20Loopcutter is right. These are great lotto scratchers.

-
-
Day 20
I used the sliding box cutter to open a package. I vaguely remember these came from ULINE or some other industrial supply company in a box of 50 and even though the blade is replaceable they were considered disposable because they were so cheap. Admittedly I haven't used this one in years but I'm glad I didn't throw it away.
-
@cody6268: I enjoy Propel every now and then!
@kaevin: somehow I think I'd prefer the notch to the slider.
@AzteCypher: is that granite? If so, hope you didn't have to install them!
@ReamerPunch: I ate a lot of pizza yesterday and the day before. What was on yours?
@LoopCutter: shame the Gerber was so recalcitrant!
@JonesE: I'm still thinking a Fastback would be a nice pick-up!
@BPRoberts: $4 is better than $0!
@Alan K: I wore out a lot of those sliding jobbies. They must have been really cheap, because I was never given just a new blade.
Day 20
Why the folks at Scott ABF Exchange felt the need to zip-tie my new watch to its plastic holder is a mystery to me. But at least it gave me some challenge fodder.
[attach id=0 msg=2509226]
The objective was simply to cut the offending object. Both blades did so without issue. The result: another tie.
Utility knife record: 15-0.
Stanley record: 3-3-2.
DeWalt record: 3-3-2.
-
Day 21
Olfa PL-1
[attach id=0 msg=2509236]
Made in Japan goodnessThe package arrived before Christmas. Here it is the L-size autoload cutter. I originally wanted to get a L-2000RP but the price is very high. And given I have not acquired as many Ofla as NT cutters, I decided to get this one (and another Olfa) for Christmas.
[attach id=1 msg=2509236]
Front[attach id=2 msg=2509236]
Back with reloading instructions[attach id=3 msg=2509236]
Tajima for size comparison



-
Continue
Top
[attach id=0 msg=2509237]Bottom
[attach id=1 msg=2509237]The body is made from fiberglass reinforced plastic. It gives a satin and warm touch. The yellow is a more muted one instead of the usual Olfa yellow.
One feature that is commonly seen on higher grade L size cutter is this dial screw for locking the blade in front. Olfa calls it W (double) lock. It is the best place for stablizing the blade, giving less length to flex. And it stresses near to the tip, making the stresser part being discorded rather than stressing the back.
Speaking about the tip, with its bent part, is very well made. Giving no play at all even without the lock screw.
It features the same autoload chamber mechanism with LTD-04, but an enlarged one. IMO the mechanism looks more in line with the L sized cutters and isn't enlarged due to having the extra things in the gut.
[attach id=2 msg=2509237]
Chamber openedTo open the compartment, push the red lock from the back and slide the black end part to the end and the compartment will be pushed open by the backing spring.
From the back of the compartment, I can see the rail is being slided into the plastic handle, and fixed with a screw afterwards.




-
Continue
This one seems to have been in the storehouse for a loooooong time. The blades oil between the blades is dried up and sticked together. Making it impossible to slide out the first blade and I thought it was defective. A light pry between the blades with a Tajima fixed that.
[attach id=0 msg=2509238]
The blades a all sticked together[attach id=1 msg=2509238]
Blade out, the cutter is very nice to hold.This PL-1 is a nicely made auto load L size cutter with a screw lock. It is much cheaper than the NT counterpart. I am going to put all the HFL blades inside it and throw away the extra HFL. But I am keeping one of them incase someone want to lend a cutter.
Action shot opening box for Christmas decorations



-
@Farmer X said:
@AzteCypher: is that granite? If so, hope you didn't have to install them!I've helped install it before but I've never done it myself. It's heavy and scary. Scary in that I don't want to break it while installing it.
I'd rather pay someone else to do it.<u>Day 20</u>
The package says these battery blister packs are baby proof. I think they're idiot proof because it took me longer than necessary to get the battery out. The EAB had to come in and save me from further embarassment.


-
@Farmer X said:
@ReamerPunch: I ate a lot of pizza yesterday and the day before. What was on yours?Pepperoni, mushrooms, cheese and pizza sauce. It tasted so good!

-
@AzteCypher said:
I've helped install it before but I've never done it myself. It's heavy and scary. Scary in that I don't want to break it while installing it.
I'd rather pay someone else to do it.<u>Day 20</u>
The package says these battery blister packs are baby proof. I think they're idiot proof because it took me longer than necessary to get the battery out. The EAB had to come in and save me from further embarassment.


I always feel they are extremely hard to open even with a pair of scissors. If I use cutters I am afraid of scratching the cell inside. I'm just too careful.
@Farmer X said:
@kaevin: somehow I think I'd prefer the notch to the slider.That's why they are selling both.

-
Day 21

-
Day 21
This was one part of a two pack of Milwaukee Fastbacks we bought earlier this year. We call it a "his and hers" set. This one is the "hers" and mostly sits on my wife's desk.
[attach id=0 msg=2509355]
I used it to make an ice melt scoop out (I warmed up the cider to drink after I cleared the snow).
[attach id=1 msg=2509355]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


