The December 2024 Utility Knife Challenge
-
Day 20
SDI 0444C-K InGenuity Pro
[attach id=0 msg=2509113]
Front[attach id=1 msg=2509113]
BackThis is a follow up/improved variation of the original InGenuity 0443C. This model shares the same concepts, top slider, ergonomic plastic shell.
[attach id=2 msg=2509113]
Parts[attach id=3 msg=2509113]
Back of parts



-
Continue
The main difference is the tip side design. Instead of having the string cutting notch, it features a plastic slider which locks the blade and stabilize the tip. Sliding the part towards the tip, the plastic will be pushed between the rail and blade, preventing side play and locks it. You can also lock it to prevent blade from accidentally drew out in your pocket. It gives the most stable cutting point with 1 snap length in locking position, in which all the sideway movement is from the blade flexing. That can be further improved if a 58 degree blade is used (less length protruding) when desired. I may switch this one to a 3M Ti Coated gold blade (58 degree).
[attach id=0 msg=2509115]
In most stable state, locked positionThe plastic shell is also modified to a round profile instead of triangular. While I prefer the triangular shape, this new profile is still comfortable to hold.
Action shot:
[attach id=1 msg=2509115]
Slicing a piece of used paper for warping chewed gum while studying[attach id=2 msg=2509115]
In original packageI think the string cutting notch of the original InGenuity has limited use, as you can always draw out a little blade to cut the string anyway. The lock is more useful than the notch, it also increase the precision when cutting finer details. I think it is an improved version. I like the black-gold colorway as well (it also has a white-gold colorway). If it had a metal body triangular body, I will absolutely love it even more. But I have to appreciate there is a brand continuously putting effort to improve the light duty cutter designs. Also kudos for SDI to put the ugly brand name and model sticker for the InGenuity series at the back. It would be even better if it is stamped/edged or silk screen like the front, but I think they finally realized how to tune the design to be more pleasing and they are on the right track.



-
Day 19
No use today. The pocket clip was not easy to bend because of the odd shape. It is shaped like a hockey stick to accommodate the string cutting notch and this odd shape made it want to twist rather than bend under the force of the pliers. If I had to do it again, I think it might be better to remove the pocket clip first, then use the counter force of two pliers against each other. I could bend it however and wherever I wanted it bent, then reattach the adjusted pocket clip to the knife.

-
<u>Day 19</u>
Today was a fun mail call day. Got to open Christmas cards from family and friends.

-
Day 19
[attach id=0 msg=2509120]
Pulled the utility knife from the tool bag.

-
-
-
Day 20
Pizza pie and EAB

-
@ReamerPunch said:
Olfa CTN-1Nice! And the blade has 5 snap off sections!
-
Day 20
Loopcutter is right. These are great lotto scratchers.

-
Is that a winning ticket? I don't know how to read the things. Best wishes. G

-
Day 20
[attach id=0 msg=2509180]
Inspected the Gerber, to determine how to exchange the blade!
The slide movement is not smooth. Sticky to deploy and nearly impossible to retract. Required pliers to coax the mechanism back.
I will not carry.
And, yes the blade slide is well lubricated.
Gerber would have been wise to line the slide with thin teflon strips or such. The mech is a pain!
-
@BPRoberts said:
Day 20Loopcutter is right. These are great lotto scratchers.

-
-
Day 20
I used the sliding box cutter to open a package. I vaguely remember these came from ULINE or some other industrial supply company in a box of 50 and even though the blade is replaceable they were considered disposable because they were so cheap. Admittedly I haven't used this one in years but I'm glad I didn't throw it away.
-
@cody6268: I enjoy Propel every now and then!
@kaevin: somehow I think I'd prefer the notch to the slider.
@AzteCypher: is that granite? If so, hope you didn't have to install them!
@ReamerPunch: I ate a lot of pizza yesterday and the day before. What was on yours?
@LoopCutter: shame the Gerber was so recalcitrant!
@JonesE: I'm still thinking a Fastback would be a nice pick-up!
@BPRoberts: $4 is better than $0!
@Alan K: I wore out a lot of those sliding jobbies. They must have been really cheap, because I was never given just a new blade.
Day 20
Why the folks at Scott ABF Exchange felt the need to zip-tie my new watch to its plastic holder is a mystery to me. But at least it gave me some challenge fodder.
[attach id=0 msg=2509226]
The objective was simply to cut the offending object. Both blades did so without issue. The result: another tie.
Utility knife record: 15-0.
Stanley record: 3-3-2.
DeWalt record: 3-3-2.
-
Day 21
Olfa PL-1
[attach id=0 msg=2509236]
Made in Japan goodnessThe package arrived before Christmas. Here it is the L-size autoload cutter. I originally wanted to get a L-2000RP but the price is very high. And given I have not acquired as many Ofla as NT cutters, I decided to get this one (and another Olfa) for Christmas.
[attach id=1 msg=2509236]
Front[attach id=2 msg=2509236]
Back with reloading instructions[attach id=3 msg=2509236]
Tajima for size comparison



-
Continue
Top
[attach id=0 msg=2509237]Bottom
[attach id=1 msg=2509237]The body is made from fiberglass reinforced plastic. It gives a satin and warm touch. The yellow is a more muted one instead of the usual Olfa yellow.
One feature that is commonly seen on higher grade L size cutter is this dial screw for locking the blade in front. Olfa calls it W (double) lock. It is the best place for stablizing the blade, giving less length to flex. And it stresses near to the tip, making the stresser part being discorded rather than stressing the back.
Speaking about the tip, with its bent part, is very well made. Giving no play at all even without the lock screw.
It features the same autoload chamber mechanism with LTD-04, but an enlarged one. IMO the mechanism looks more in line with the L sized cutters and isn't enlarged due to having the extra things in the gut.
[attach id=2 msg=2509237]
Chamber openedTo open the compartment, push the red lock from the back and slide the black end part to the end and the compartment will be pushed open by the backing spring.
From the back of the compartment, I can see the rail is being slided into the plastic handle, and fixed with a screw afterwards.




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


