The December 2024 Utility Knife Challenge
-
Putting up another day 22 shot
Last pic only shown a blurred back of it.


-
Day 22
My wife wanted a pack of scissors from Sam's Club, and it came with this utility knife. It's a big sucker, and has a seemingly excessive four different buttons on it.


-
When you figure out what the 4 buttons do, please let us know.

-
Day 22
Another month, another bottle of pills.

-
Day 21 (catching up)
Cold weather and illness meant I had nearly no energy yesterday. This is about all I would have been good for.
[attach id=0 msg=2509512]
Day 22
Of course, this medicine had an obnoxious seal.
The no-namer in the kitchen took care of it, and awlso opened a bag of frozen burritos (I'm picturing AzteCypher shuddering at that).[attach id=1 msg=2509512]
Utility knife record: 17-0.
Stanley record: 3-3-2.
DeWalt record: 3-3-2.

-
Day 21
Did a little clean up in the garage on Saturday. Mainly cutting up some boxes from the big river and some other retailers. Wife likes to open up the boxes and dump the cardboard in the garage. So I got it all taken care of relatively quickly. Once done we got cleaned up and headed out to a pre Christmas get together with a couple of families.
JonesE
-
Day 22
Did a quick little side project this morning while the family slept. Yesterday a friend asked if I could take a look at a knife he had. I said sure and he handed me this CRKT knife he had in his toolbox in the garage while we very visiting. It was missing some screws and a spacer between the liners. So, I disassembled the knife and proceeded to give it a good cleaning with an old discarded toothbrush and some 70% isopropyl alcohol. All the parts looked ok, except for the cosmetic wear. I searched through my knife parts bin and found two spacers and four screws I then reassembled the knife with some blue loctite and adjusted the pivot. Checked the blade opening and closing and was happy the the blade was centered and the lock up was solid with a1/3 travel on the lock bar for full lock up. Then dropped of the knife to its owner this afternoon while I was out on chores.
JonesE
-
Day 22
End of the day, and realized I neglected a share thus day.
Was reading a travel magazine and dreaming of a Scotland visit.
So the background is
[attach id=0 msg=2509539]
-
Day 23
My Trojan folding utility knife. No crazy features. Just one-handed, folding, and locking. Cheap. It works. Also thin. Kinda heavy, though.

-
Nice work with that CRKT, JonesE!

-
Day 23
Olfa 185B extra long 3xtra thin wallpaper cutter
[attach id=0 msg=2509554]
In pqckageCutter #2 from Christmas package. I had been eyeing on this for a few years as well.
[attach id=1 msg=2509554]
Front[attach id=2 msg=2509554]
BackThis Olfa features an extra long blade (20 snaps) with 3xtra thin 0.2mm blades. Normal A sized are 3.8mm. Olfa has extra thin at 0.25mm and 0.2mm and nt cutter has 0.25mm for sa-400grp. This cutter can only fit 0.2mm it claims (I have not get a 0.25 to try)
[attach id=3 msg=2509554]
Blade vs normal blade



-
Continue
With 0.2mm blade install, the blade still move side to side a bit. The tip stamped OLFA TOKUSEN LONG which means specially made long blade I guess.
[attach id=0 msg=2509555]
Engrave at the tipThere is no snapper, on the other end is a pointy metal part extended from the rail. It is intended for worker to pry open switch cover or unscrew screws from switch with it. The metal/stainless steel is hardened as olfa claims.
[attach id=1 msg=2509555]
Pry end[attach id=2 msg=2509555]
Front of parts[attach id=3 msg=2509555]
Back of parts



-
Continue
The body is dupped fiber glass reinforced plastic in some ads but I have not seen that in the Olfa site. The chrome on the stainless steel is very shiny but the edge at the rail isnt done very well.
[attach id=1 msg=2509556]
Boring action of cutting open a pack of tissues[attach id=0 msg=2509556]
Trimming off a piece of loose threadWhile the body of this cutter is not overly interesting, the blade itself is very very sharp. Now I got the "thinnest A sized blade" for no actual use (that demands the thinnest). But I finally collected it.


-
Day 23
The "his" from the "his and hers" set.
[attach id=0 msg=2509586]
It opened some razor blades.
[attach id=1 msg=2509586]


-
@ReamerPunch said:
Nice work with that CRKT, JonesE!
Thanks RP. It felt great to do something good for someone else this holiday season.
JonesE
-
Day 24
Makita D-65713 8 blade cartridge L size
Seeing how cheap this 8x blade cartridge L size is. And it comes with 8 blades included as well. I can't resist but get one and see what it is about.
[attach id=0 msg=2509610]
In package[attach id=1 msg=2509610]
FrontMakita is a reputable power tools company from Japan. This D-65713 is made in China and cheap. Costed ~usd$6 here. It is quite a deal with 8 blades included.
[attach id=2 msg=2509610]
Back[attach id=3 msg=2509610]
Blade drawn out, slider pushed to the replacement/remove position



-
Continue
The patent held by NT Cutters for A-1000GRP and L-2000GRP I guess have long expired. There are a lot of copies or variations of the mechanism from different brands like from Chinese power tool/accessories brands like Greener. And this one from Makita is a cost down version with sized up blade storage.
[attach id=0 msg=2509611]
Parts[attach id=1 msg=2509611]
Back of partsFirst the cartridge is expanded to hold 7 blades and made from mostly plastic. NT Cutters use a cartridge made from a single or 2 pieces of metal sheet (at least from a500 and a1000), Makita made it from 1 plastic and 1 metal spring sheet. I think this is clever because most workers view cutters as disposable tools, either they break, mess up from abuse or gets stolen. They must keep the cost down.
[attach id=2 msg=2509611]
The Makita comes with 8 blades, 7 in cartridge, 1 loadedSecondly, they removed the dial lock at the tip (compared to PL-1 or L-2000GRP). This further remove number of parts and metal parts.
The reload mechanism is a copy of NT cutters. You push the slider all the way out then you can remove old blade and install new blade from the tip. Or, slide the slider bqck to load a blade from the cartridge.
[attach id=3 msg=2509611]
Inserting the cartridge



-
Continue
The body is mainly plastic wrapped in rubber in classic Makita color, speaking the same design language as their power tools.
The rail is metal (not sure what kind of metal) and seems to be plated. The tip does not have the same level of precision as Olfa PL-1 and has more play. The auto lock of slider works, but does not give the same level of confidence and satisfaction with its less renounced clicks. The quality of plastic also feel less quality compared to Olfa and the edge is also has some blurs.
[attach id=0 msg=2509612]
Tips compared to Olfa PL-1In short, I am not very happy with this purchase, especially seeing the same shop is selling PL-1 at a little LOWER PRICE. But I do see how it creates an attractive package for the workers with its larger cartridge and increased number of blade storage and included blades. (PL-1 is 6+1 but 3 included, Makita is 8+1 with 8 included). But if given the chance I would buy 1 more PL-1 instead.
[attach id=2 msg=2509612]
Makita together with PL-1


-
@JonesE: great work on the CRKT!

@LoopCutter: visiting Scotland would be nice. I'm just not a fan of the process needed to get there.
@ReamerPunch: sometimes good and basic is just what you need!
@kaevin: I'm gonna have to see if I can find a stateside source for Olfa. They sure have some nice offerings!
@BPRoberts: I haven't opened packs of razor blades in seemingly forever. As pressed for time as I am every morning, I stick with electric.
Day 23
"Lift and peel" is what I got after making an incision with the no-namer in the kitchen.
[attach id=0 msg=2509648]
The orange juice is helping. I feel slightly better as of this post, but may have to cancel plans to work on the holiday. We shall see.
[attach id=1 msg=2509648]
.jpg)
.jpg)
-
Day 21;
Burned the midnight oil last night preparing for company today.
[attach id=0 msg=2509675]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

