The December 2024 Utility Knife Challenge
-
<u>Day 23 - catch up</u>
I was inspired by Cody's post of the Valet Auto Strop Razor Utility knife, so I found a reasonably priced one on fleaBay. Gave it a bit of cleaning to get rid of most of the gunk but I'd like to give it a good polish as well. I'm going to try and restore the original blade that came with it. I managed to pull the reinforcement off a Husky single edge blade and it fit just fine in the slot.

-
<u>Day 24 - catch up</u>
The EAB assisting with the lagomorph's new treat....

And "assisting" with taste testing some Christmas goodies the wife was baking.

-
<u>Day 25</u>
To my Christian friends, Merry Christmas! To my Jewish friends, Happy Hanukah! To my atheist friends, have a hell of a day!

-
Day 25
Merry Christmas and save the turtles!

-
@BPRoberts: fantastic use of cord cutter notch!

@cody6268: broken tips are the worst, followed closely by chipped blades.
@LoopCutter: hope you had a great visit!
@kaevin: even with those faults, it seems like good value for the money.
@ReamerPunch: for its good qualities, I think I'd overlook the bit of extra weight.
@Adam5: I imagine so, especially if those toys needed batteries!
@Alan K: what kind of cigar was that?
@JonesE: you now have me curious as to what model my Stanley is. I'll show it before the challenge concludes.
@AzteCypher: great job catching up! Would love to see some lagomorph photos.
Merry Christmas to awl!
Day 25
No utility knife use today, so here are the EABs with my Christmas dinner. There is lasagna under all that parmesan cheese.

[attach id=0 msg=2509970]
Utility knife record: 20-0.
Stanley record: 3-4-2.
DeWalt record: 4-3-2.
-
Day 24:
Merry Christmas everyone!
Some of what I've used alongside the only knife I got for Christmas, a Classic SD clone. Probably going on my truck keys, as aside from my shop keys that have a Buck Nano Bantam, most of my keys have a Nite Ize Doohickey or Proto J100 at most.
[attach id=0 msg=2509989]

-
Day 26
Boxing day.
Unpacking some toilet roll with the Muji Mini



-
Day 25
[attach id=0 msg=2510006]
Just arrived home after spending the holidays with two of my kids families!

-
Day 26

-
Bonus action
Kids got these micro packages from a catcha/claw machine
Unboxing for them with muji mini happens to be on my pocket

-
Day 26
I used the WorkPro to cut up a box for the recycle bin.

-
Day 26
Package Duty
[attach id=0 msg=2510080]
1095 Sod Buster, Autumn Deep Canyon Jig!
[attach id=1 msg=2510080]


-
@Farmer X said:
@kaevin: even with those faults, it seems like good value for the money.If I need to open a dozen of boxes in a row or cutting straps tied up boxes a lot, I think they are very good that way. Given the way it slides open, it's too tight for my taste to keep sliding open and close, or if it is loosened (I think that would be hard) it is dangerous to keep in pocket.
It is well designed for its purpose.
-
@cody6268: looks like a good companion for your truck keys!
@ReamerPunch: nice EAB!

@kaevin: I was never good with a claw machine. Hope your kids did well!
@Alan K: still no boxes to cut up here. But I do have some cardboard "remnants" that are future test subjects.
@LoopCutter: a very good-looking Soddie!
Day 26
The seller from whom I purchased the Day 24 Legos used a nifty address label. I wanted to keep it with the sets I purchased, so I used the slide-out job from a previous job assignment to remove it from the envelope. I'll probably trim the manila paper off with MiniChamp scissors later on.
[attach id=0 msg=2510122]
Utility knife record: 21-0.
Stanley record: 3-4-2.
DeWalt record: 4-3-2.
-
Day 26
It's a good bottle opener.

-
-
<u>Day 26</u>
Used the EAB as a pencil sharpener today.

-
[attach id=0 msg=2510145]
Day 27
Olfa LTD-04
CPR and AED course at Red Cross. Sliced some trashed paper for chewing gums.

-
Day 27
My no name snap-off that I wish was a snap-on

-
Day 27
I finally got around to a project I have wanted to do for a while now. I swapped the blades, liners, and axis bars around on two of my Benchmade 551s. I put the 20CV blade back in the 551-1 gray and blue scales. I then put the D2 blade back in the Camp Perry knife. I believe the model number is 551-1304. When that was done, I did a scale swap on a 550SBK-S30V that I picked up in a trade. The blade, liners, and axis bar was installed in a set of Micarta scales that I never fully liked. So I scale swapped them with a new set of black G10 scales with some titanium back spacers. I think this will be my daily carry for a while once the utility knife challenge ends. The Free P4 gripped the scale spacers while I installed the scale screws. The fastback freed the scales from the bubble wrap mailer.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


