The December 2024 Utility Knife Challenge
-
Day 25
[attach id=0 msg=2510006]
Just arrived home after spending the holidays with two of my kids families!

-
Day 26

-
Bonus action
Kids got these micro packages from a catcha/claw machine
Unboxing for them with muji mini happens to be on my pocket

-
Day 26
I used the WorkPro to cut up a box for the recycle bin.

-
Day 26
Package Duty
[attach id=0 msg=2510080]
1095 Sod Buster, Autumn Deep Canyon Jig!
[attach id=1 msg=2510080]


-
@Farmer X said:
@kaevin: even with those faults, it seems like good value for the money.If I need to open a dozen of boxes in a row or cutting straps tied up boxes a lot, I think they are very good that way. Given the way it slides open, it's too tight for my taste to keep sliding open and close, or if it is loosened (I think that would be hard) it is dangerous to keep in pocket.
It is well designed for its purpose.
-
@cody6268: looks like a good companion for your truck keys!
@ReamerPunch: nice EAB!

@kaevin: I was never good with a claw machine. Hope your kids did well!
@Alan K: still no boxes to cut up here. But I do have some cardboard "remnants" that are future test subjects.
@LoopCutter: a very good-looking Soddie!
Day 26
The seller from whom I purchased the Day 24 Legos used a nifty address label. I wanted to keep it with the sets I purchased, so I used the slide-out job from a previous job assignment to remove it from the envelope. I'll probably trim the manila paper off with MiniChamp scissors later on.
[attach id=0 msg=2510122]
Utility knife record: 21-0.
Stanley record: 3-4-2.
DeWalt record: 4-3-2.
-
Day 26
It's a good bottle opener.

-
-
<u>Day 26</u>
Used the EAB as a pencil sharpener today.

-
[attach id=0 msg=2510145]
Day 27
Olfa LTD-04
CPR and AED course at Red Cross. Sliced some trashed paper for chewing gums.

-
Day 27
My no name snap-off that I wish was a snap-on

-
Day 27
I finally got around to a project I have wanted to do for a while now. I swapped the blades, liners, and axis bars around on two of my Benchmade 551s. I put the 20CV blade back in the 551-1 gray and blue scales. I then put the D2 blade back in the Camp Perry knife. I believe the model number is 551-1304. When that was done, I did a scale swap on a 550SBK-S30V that I picked up in a trade. The blade, liners, and axis bar was installed in a set of Micarta scales that I never fully liked. So I scale swapped them with a new set of black G10 scales with some titanium back spacers. I think this will be my daily carry for a while once the utility knife challenge ends. The Free P4 gripped the scale spacers while I installed the scale screws. The fastback freed the scales from the bubble wrap mailer.
-
Good work on the blade and scale swaps. The one with the black blade is a good contender for the Feb. combo edge challenge.

-
Day 27
Used the WorkPro to open a pill for the cat.
-
Stopped by the hardware store and grabbed some Lenox utility knife blades and a Klein micro bit screwdriver.
JonesE
Nice! I've had that same Klein model for almost a month, and it's almost perfect. Lowe's sold out quickly, so they're obviously popular. I like the Snap-On mini prybar as a prybar, but a small pocketable multi-bit driver has been a headache. I don't like the Picquic handle. Wera has some nice options, but they're not sold in stores (still am ordering one). PB Swiss is absolutely perfect, but they make Snap-On seem cheap. Thus, $15 and most bits I need on a regular basis (I admit, I do use two sizes of hex on it every now and then) was just what I needed.
-
Day 25:
Opened a feed sack for the sheep.
[attach id=0 msg=2510252]

-
Day 26: more of the same as I finished unloading the car prior to a trip to the dump and Dollar General.
Cat food:
[attach id=0 msg=2510255]
Chicken corn:
[attach id=1 msg=2510255]


-
Day 27
[attach id=0 msg=2510260]
Recycle day. Cut box s down.

-
Day 27
Took the tag off a pair of pants for my wife.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


