The December 2024 Utility Knife Challenge
-
@JonesE: considering your location, I'm completely unsurprised that it rained all day.
@AzteCypher: that Valet Auto Strop is pretty cool!
@BPRoberts: that would be a neat place to visit!
@cody6268: "peg-warmers" are something else I remember well from my die-cast collecting days.
@kaevin: I have a few bottles and a lot of cans that should be turned in for refund...
@LoopCutter: great bones on that Stockman! I assume it's a 75?
And now it's time for some final thoughts on the utility knives. They are less than ideal for kitchen duty, but they handled every other task I threw at them quite well. Being able to change blades to better suit the task at hand, or when they get dull, is a great bonus. This challenge was a hell of a lot of fun. I'm pleased to have hosted it and honored to have had such a great group of fellow challengers!

And just a quick update: the badge hasn't gotten the green light as of this post. Hopefully soon. I still have plans to do a giveaway for those who earn a badge, but again, that's contingent upon my being able to procure the intended prize.
Now to briefly switch to the phone used for photography and post the day 30 photo.
-
Day 30
Here are two that waited until today to show themselves. If memory serves me correctly, I bought the Champion Quality Tools job not long after relocating to Michigan. It's seen quite a lot of use, and the screw at the top of the blade slot has to be tightened periodically. The bright green Stanley is a more recent addition that sat neglected for a while. It got a dose of spray disinfectant before the photo was taken. Bith of these live in my "home tools" box and could use new blades.

[attach id=0 msg=2510620]
The final tally...
Utility knife record: 22-1.
Stanley record: 3-4-4.
DeWalt record: 4-3-4.
-
Day 31
NT cutter AR30D-WB
[attach id=0 msg=2510623]
In packageYes I just remembered it is a 30 day challenge, but December has 31 days. So here is an extra entry and I promise it is the last cutter I buy, in 2024.
This is one of the 3 colors of their 30 degree with color body A sized cutter from NT cutter released in June 2024. Stone grey SG, Leavy green LG and Wood beige WB. Features a plastic shell over the stainless steel rail. Fill mount is possible and it is designed to be easy to hold on both left or right hands.
[attach id=1 msg=2510623]
Front[attach id=2 msg=2510623]
Back[attach id=3 msg=2510623]
Blade out



-
Day 30
Here we are on the last day. Thanks to Dan for hosting and to all who participated, whether they completed or not. I enjoyed seeing everyone's selected utility knives being used for various tasks. I liked carrying a utility knife as they were more than up to most of my daily cutting needs. A lot of my cutting needs involves puttering around in the yard and I found that the utility knives don't work on palm fronds and can't trim the hedges, but they did suffice at opening bags of soil and mulch. Today I used the WorkPro to open an insulated pack from the pharmacy containing refrigerated meds.The black, no name cutter is a solid EDC that is very capable and comfortable to use. The WorkPro was my favorite utility knife for pocket carry because it is so light that it was barely noticeable in my pocket. The Stanley would be my first choice for heavy duty use such as cutting up carpeting which I didn't need to do during the challenge, but I have used it for that purpose before. The flat sliding box cutter slips easily in a shirt pocket and would be my first choice for office use if I had to open packages all day.


-
Continue
[attach id=3 msg=2510625]
[attach id=2 msg=2510625]
Top and bottom with anti slip design near to the tip[attach id=0 msg=2510625]
Front of parts[attach id=1 msg=2510625]
Back of partsThis cutter is a bit polygon/squarish. Sets it apart from the more streamlined designs like A300, A500. Comparing to the A1000 its outline is still very hard and straight. It's almost like NT speaking in Olfa language. And it's very light given it's plastic shell. If there is something embossed on the back, it will look better, like the lines on the back of A300 or just the brand name and model number.
Somehow I think the slider may fit the STL-ONE and alike.
It have been hard to choose between this and the PMGA-EVO2 (an all black A300GRP with 30 degree black blade). But lastly I decided to get this as this is another body shape and design. The muted tones of all 3 colorway are pleasant as well and posed a hard decision to choose 1 out of three.




-
Continue
Photo of all my cutters:
[attach id=0 msg=2510626]Final thoughts:
In this challenge, I bought 9 new cutters. Making it a total of 25 in the end. Some of them I have been wanting to get for a long time. Many of these look the same in the look or even in the feature list, but when unboxed and used actually they are different.Out of these brands, I like NT and Olfa the most. They are the best hands down. SDI and Tamiya are okay. Tamiya is lacking the tighter tolerance and precisions nowadays and slide more to the "bigger and strong" side with less precision with special features they think would be useful for their audience like the driver tip and fins in some of their models. SDI lacks polish in some of their models. I think they can "do it" but choose not to, to keep their cost down. They have innovated in their design with ingenuity series or the model which I do not own like the 3006C.
There are still some models I want to get hold of like the 3006C mentioned above, the Knipex CutiX, the NT A300 we used to use in art lessons, the NT K200RP and Olfa 180 which are the original forms of S-202P, the wood composite OLFA WD-AL, the NT L-2000GRP etc, but I should stop before my wife gets mad.
Thanks Dan for the challenge and all of you who joined or tag along and bared with my utility cutter obsession. Hope you enjoyed.

-
@LoopCutter: great bones on that Stockman! I assume it's a 75?
Yes, a 75. Covers are CASE’s Mediterranean Blue. Steel is SS.
Thank you😉 -
@Farmer X said:
~
@LoopCutter: sky blue bone? I bet that's pretty!
~I owed you a picture back from day 6
The package contained a MiniTrapper in Sky Blue, a back up since I had not found a Trapper in the requested color.
[attach id=0 msg=2510635]
I did finally find a regular trapper in Sky Blue, arrived on 12/23!
So during my search and digging deep in dealers inventory my search for one knife, allowed me to fine four additional knives. A mini (pictured), a pocket worn grey bone Tribal, and two different Sea Dragon models. 🙄

-
Day 29: no use for the knife. However, while opening my dinner, I found I've been wrong about Wenger can openers for a decade. They don't suck.
On the eve of the Buck challenge, I surprised to learn my beef with the Wenger can opener wasn't design flaws, but simply user error. Honestly, I've found that adjusting the angle (I was letting the tool pierce too deep into the can), it's faster than just about every other knife-based can opener I have, and might even tie with my P-51.
Hard to believe that I've had Wengers with can openers for a decade, but just now figured out how to use them. The reason they kept getting stuck in the can was because I was letting the can opener go to far.
[attach id=0 msg=2510649]

-
Day 30
Today's pic is my surprise favorite of the challenge, the Prybrid X. When it came in, I thought it was going to be too wimpy for much of anything. I expected the prybar to pry the knife apart and the xacto blade to be too small for much use. And while I wouldn't want to be stranded in the woods with it, or have it be the only multi for the rest of my life, it handles my basic EDC needs pretty well in a nice little package. Also, comes with a spiffy lanyard. Sometimes you just want just enough, and the PB-X does that.
The full size Prybrid would be a great companion for working around the house, giving you a bit better pry surface and a larger blade. I think I'll probably swap the blade in mine and put it in the tool box.
Speaking of blades, I made it through the whole month without having to change once. It helps that I rotated between four tools.
The Lockdowns are a step up from Gerber's previous SAK-a-Like series (the Armbars), but still not great. Of the two, I prefer the Pry (the Drive's bit driver leaves a lot to be desired, and the scissors are handy). I think they get a little closer with every try at a knife based MT. Maybe we'll get a winner out of them in a couple years (hopefully one they make state-side, I think Gerber has one of the biggest US vs outsourced quality ranges in the industry.)
A utility blade is plenty for basic stuff like cutting cord and opening packages. Wouldn't really want it for food prep or whittling, but if you really hate sharpening knives (or do a lot of cardboard), you could probably get by this way.
Thanks for hosting FX! I'll see some of you in the Buck challenge for January!

-
Day 30

Badge awarded to Farmer X, kaevin, LoopCutter, JonesE, AzteCypher, Alan K., cody6268, BPRoberts.
If you have completed the challenge and I did not award you the badge, send me a PM, or request the badge and I'll get on it. Happy new year, and thanks to Farmer X for creating and hosting, and for the members who made this fun by participating and following!

-
@ReamerPunch said:

Badge awarded to Farmer X, kaevin, LoopCutter, JonesE, AzteCypher, Alan K., cody6268, BPRoberts.
If you have completed the challenge and I did not award you the badge, send me a PM, or request the badge and I'll get on it. Happy new year, and thanks to Farmer X for creating and hosting, and for the members who made this fun by participating and following!
Thank you

-
@cody6268 said:
Day 29: no use for the knife. However, while opening my dinner, I found I've been wrong about Wenger can openers for a decade. They don't suck.On the eve of the Buck challenge, I surprised to learn my beef with the Wenger can opener wasn't design flaws, but simply user error. Honestly, I've found that adjusting the angle (I was letting the tool pierce too deep into the can), it's faster than just about every other knife-based can opener I have, and might even tie with my P-51.
Hard to believe that I've had Wengers with can openers for a decade, but just now figured out how to use them. The reason they kept getting stuck in the can was because I was letting the can opener go to far.
[attach id=0 msg=2510649]
Yup, I discovered this in my Can Opener thread. The Wenger can opener is actually great, once you get used to that little quirk.

-
@ReamerPunch said:
Badge awarded to Farmer X, kaevin, LoopCutter, JonesE, AzteCypher, Alan K., cody6268, BPRoberts.
If you have completed the challenge and I did not award you the badge, send me a PM, or request the badge and I'll get on it. Happy new year, and thanks to Farmer X for creating and hosting, and for the members who made this fun by participating and following!
Thank you!!
<u>Day 31 - For good measure</u>
Used the Valet Auto Strop to open up this bag of corn nuts. Nice clean cuts!

-
Just a quick check-in to say three things. Thank you to RP for making the badges happen!
I have the prize in-hand, so awl who earn the badge will be eligible to win.
And I ain't done yet...a little bonus will be posted not long after I get home. 
-
Thanks for the badge RP!

-
Thank you ReamerPunch!
JonesE
-
-
-
@Alan K: I can't recall when I last saw a palm tree.

@kaevin: you have quite the collection of cutters! :o Glad you enjoyed the challenge.
@LoopCutter: Case sure does a nice job with their bone!

@cody6268: Wenger can openers are awesome!

@BPRoberts: good to see the little Prybrid surprised you in a good way!

@ReamerPunch: thank you again for the badge, and I think all nine who completed the challenge have been awarded!

@AzteCypher: I sure do like CornNuts!

Based on the list in this post, here are those who completed the challenge and aren't me. This is the order in which everyone signed up, and the numbers will be used to determine the winner.
- Alan K.
- AzteCypher
- LoopCutter
- ReamerPunch
- kaevin
- JonesE
- cody6268
- BPRoberts
Now to pick the winner and add a couple of photos!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
