What did you use your Sak on today?
-
Pliers on my Spirit to take a couple chards out of the back tire on my bike.
-
Hope bo patching or plugging were needed!
-
<u>DAY 26</u> Yellow Hiker helping with some morning stuff.
[attach id=0 msg=2524400]

-
Used the large blade on the SwissChamp to cut some cord to hang a banner.
As I was at the top of a ladder at the time, no picture. :(
-
Main blade 3x
Scizzors 3x
Tp 1x
...and that's with the trusty red Classic
-
Pliers on the Spirit to Open an Back of Bee Smoker Material to Pack in smaller Packs , and the Paket Opener Edge to open 2 Packages at work, also 2 days ago the Pliers to make a bend Key for our Market Money Cassette back to flat .. and I did open a Bottle of Bear for my Dad as I don’t Trink Alkohol, whit the Bottle Opener which works just the same as on an normal SAK..

-
Flat driver to open stereo cans, blade cuts food wrap and string, pen on Weekender plus to pay for it!

-
I used my 84 mm Climber while replacing a forklift motor controller with one that had slightly different bolt hole spacing. I stripped some narrow gauge wires with the stripper, cut some electrician's tape with the scissors, and then used the awl to scribe which bolt holes needed to be adjusted and by how much.

-
Used the main blade on my Spartan to cut an old shoelace serving as a secondary latch on a gate.
Honestly, I was too lazy to grab the rigging knife out of my tool roll...
-
Helping my oldest son into a shirt and tie (not something either of us wear often) this morning for his mock interview, and we couldn’t get the top button fastened. Grabbed the Explorer only because it was closest. Turns out that the SAK hook makes an outstanding buttonhook.

No pics because he was in a hurry…
-
The Ranger 79 got to trim a piece of wood, used to level my old washer and some other house chores. [attach id=0 msg=2530704] [attach id=1 msg=2530704]


-
Used the toothpick to open up the battery compartment's lid, and the eyeglass SD to pull back the battery latch so that I could remove the protective film from my new valve pressure gauge; found out my floorpump was off by 10psi!!!


-
[attach id=0 msg=2531067]
Used the saw to cut some sawbriars wrapped around some privet with wild rose wrapped around all of that. Nothing very heavy to cut, but tricky if you don't want to draw blood. I think the deer have killed off a lot of the multiflora rose. There used to be a continuous layer of these things. Some had stems four and five inches through and climbed way out of sight in the trees. Might be something else killed them. Lots of the trees are dying too.
I did carry a shovel along as well. Just looks like an ordinary old shovel, right? Very heavy rain from time to time here. I had to dig a few ditches. It was so nice a few minutes ago, I thought about mowing some. Now the thunder is rolling and skies are darkening fast. More rain coming. Just can't catch a break. Best wishes. G
::)
-
It's been a while since I've had occasion to use a multi's saw. And like you, I can't catch a break with the weather. I miss hot and dry conditions.
-
I don't use the saw on my SwissChamp all that often. But the times I have used it, it was sure handy as there weren't any other saws around.
-
Much the same with me. I rarely need a wood saw, but when I do, a multi wood saw is more than sufficient. That'll change if/when I start camping.
-
I even had a spontaneous need for the metal saw about a year ago at work. A piece of metal was sticking out of a mic clip. No wire cutters around, but the metal saw, then the metal file took care of it.
I still think wire cutters would be a great tool on a SAK. Same design as the pliers.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login