Keychain pliers tool Challenge (August) 2025
-
I'm a lefty too, Gordon. The Vic scissors were the reason I started carrying a SAK because function left handed scissors were impossible to find back then. I know what you're saying with using the keychain tool as the primary tool! It's definitely taking some getting used to.
@LoopCutter said:
Day 4I am trying very hard to allow my keychain tool to be my goto tool. Trying is a key word…
Today preparing a report, and needed a few page markers. Light blue looks good, and paper was within reach.
My LM PS is bladeless, but has scissors, small scissors to provide a reasonable description.
First, a disclaimer, I am typical LEFT HANDED, do scissors and I normally do not function well together.
So I tried!
[attach id=0 msg=2540282]Not great, but functional. Yet, I normally just use a knife blade, and trace the blade over imaginary lines, a neat score is accomplished and a clean separation results
So, I tried with the scissors. It scored the paper, not cleaning, but enough to allow a tear. A sample is the curvy pattern.
A attempt 😜
-
-
@IMR4198 said:
Day 4
Rain and a big cooldown here. I covered up the bulbs that had been dug up by the varmints. Naturally, they saw where the ground had been disturbed and their critter craniums interpreted that as, ' Somebody has been moving dirt. Must be something yummy buried under all that.' So they dug it all up again.
I put out some leftover mixed vegetables from a can. Mostly diced carrots. Nope. They won't eat carrots or almost any green vegetable. They had rather dig up daffodil bulbs. Come to think of it, the bulb digging could have been in retaliation to the carrot snack. How dare you offer us these orange things, we'll dig up your flowers again. Take that.
Best wishes. G
::)
[attach id=0 msg=2540256]
How dare you try to feed them@LoopCutter said:
Day 4I am trying very hard to allow my keychain tool to be my goto tool. Trying is a key word…
Today preparing a report, and needed a few page markers. Light blue looks good, and paper was within reach.
My LM PS is bladeless, but has scissors, small scissors to provide a reasonable description.
First, a disclaimer, I am typical LEFT HANDED, do scissors and I normally do not function well together.
So I tried!
[attach id=0 msg=2540282]Not great, but functional. Yet, I normally just use a knife blade, and trace the blade over imaginary lines, a neat score is accomplished and a clean separation results
So, I tried with the scissors. It scored the paper, not cleaning, but enough to allow a tear. A sample is the curvy pattern.
A attempt 😜
The scoring method with blade is often my preferred as well. The Style scissors aren’t too bade but definitely not SAK scissors.
@Barry Rowland said:
I'm a lefty too, Gordon. The Vic scissors were the reason I started carrying a SAK because function left handed scissors were impossible to find back then. I know what you're saying with using the keychain tool as the primary tool! It's definitely taking some getting used to.Fellow lefty here as well. Left-handed scissors make a bigger difference than I expected.
@gra_farmer said:
DAY 4Fitted a 3d printed attachment
Pretty cool. Looks like it could be handy. I saw a hammer one for the Style on Etsy but thought that would be useless on such a small.
-
-
@Sos24 said:
How dare you try to feed them
The scoring method with blade is often my preferred as well. The Style scissors aren’t too bade but definitely not SAK scissors.Fellow lefty here as well. Left-handed scissors make a bigger difference than I expected. Pretty cool. Looks like it could be handy. I saw a hammer one for the Style on Etsy but thought that would be useless on such a small.The hammer head ones only work for the skeletool, unfortunately cannot get hold of the metal versions here in the UK
-
Lefties unite :D (left handed that is)
LC, Barry, Sos, me too….anyone else?
-
Day 4
Used some shockcord to make an adjustable attachment strap for a knife sheath. The scissors on the Squirt did ok cutting, but for the Dime side had to use the blade.
Later the Dime package opener opened up a box with a new tool.


-
Day 2:
Quick shot of the Mini...
[attach id=0 msg=2540321]

-
Day 3:
Grabbed the Squirt P4, Style PS, and Swiss Tech USA Micro Tool.
[attach id=0 msg=2540323]
Untangled string trimmer.
These EGO trimmers are weird in that they have automatic wind., Also, you CANNOT pop the spool out to fix the string like on most (corded and cordless) as a result.
[attach id=1 msg=2540323]
Cut fingernails.
[attach id=2 msg=2540323]
Opened filament:
[attach id=3 msg=2540323]




-
Day 3, part 2.
Small tools are MUCH easier to carry, thus I'm able to keep better track of using 'em. I can carry the Squirt in my shorts all day and not notice it.
Cut the bent end off filament with the Squirt P4, and later the Swiss Tech--as the Squirt and my phone were on the work table, not the folding workbench where my printer is set up.
[attach id=0 msg=2540324]
Found a file for a belt holster for the Squirt P4, but the version I printed was for a narrower belt than my old farm store "Made in Mexico" belt, so I'll have to do another. May do internal supports to make the insides of the belt loop and sheath cleaner.
Holds decently, but I think I'm gonna do the wide belt slot version in TPU.
[attach id=1 msg=2540324]


-
Especially in Summer wear!
@cody6268 said:
Day 3, part 2.Small tools are MUCH easier to carry, thus I'm able to keep better track of using 'em. I can carry the Squirt in my shorts all day and not notice it.
Cut the bent end off filament with the Squirt P4, and later the Swiss Tech--as the Squirt and my phone were on the work table, not the folding workbench where my printer is set up.
[attach id=0 msg=2540324]
Found a file for a belt holster for the Squirt P4, but the version I printed was for a narrower belt than my old farm store "Made in Mexico" belt, so I'll have to do another. May do internal supports to make the insides of the belt loop and sheath cleaner.
Holds decently, but I think I'm gonna do the wide belt slot version in TPU.
[attach id=1 msg=2540324]
-
Another great day everyone!!
-
@PitCarver said:
Another Gerber keychain tool.
Gerber Mini Suspension. It's more robust than the Dime. It lacks the package opener and has probably the worst nail fille I've ever seen.I believe the Mini Suspension is the same as the Clutch, which I carried for most of undergrad and some time after. Great little tool. I liked mine more than the Dime I eventually replaced it with. Can confirm the nail file isn't great (the cleaner is solid). I forget what happened to it. Probably just abused the little thing too much. That was before I got into full size multis, so I definitely asked it to punch above its weight sometimes.
Day 4
Barry has it right. This is the kind of thing I missed last month carrying only knives last month. See a loose screw? Fix a loose screw. Done and dusted.

-
It's a multi tool made by United Cutlery for The Fast and Furious Movie Franchise. It' definitely not worth the money this seller is asking for. There was another one on FleaBay that was going for about $15. That's more reasonable in my opinion.
<u>Day 4</u>
Package and mail duty today. It was also a quick reminder that I need to give the little blade some TLC as it ripped through the envelopes more than slice through them.

-
Day 5
Swiss+Tech made it down to the Dollar Tree. Back when I carried this same plier thing for 15 days, I went out of my way to tighten something or whatever. Just so I could say I used it for stuff. So far, nothing has arisen that would legitimately allow the usage of this thing. I carry it and check now and then to see I haven't lost it.Best wishes. G

[attach id=0 msg=2540342]
-
DAY 5: I got this tool used, so I can't say how good the scissors used to be. My guess is that they were never as good as Vic Classic scissors.
[attach id=0 msg=2540348]

-
That's how I keep the house intact Gary...the challenges keep every nut, bot, screw, etc. tight!! 😂
Swiss+Tech made it down to the Dollar Tree. Back when I carried this same plier thing for 15 days, I went out of my way to tighten something or whatever. Just so I could say I used it for stuff. So far, nothing has arisen that would legitimately allow the usage of this thing. I carry it and check now and then to see I haven't lost it.Best wishes. G

[attach id=0 msg=2540342]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


