Keychain pliers tool Challenge (August) 2025
-
Day 2:
Quick shot of the Mini...
[attach id=0 msg=2540321]

-
Day 3:
Grabbed the Squirt P4, Style PS, and Swiss Tech USA Micro Tool.
[attach id=0 msg=2540323]
Untangled string trimmer.
These EGO trimmers are weird in that they have automatic wind., Also, you CANNOT pop the spool out to fix the string like on most (corded and cordless) as a result.
[attach id=1 msg=2540323]
Cut fingernails.
[attach id=2 msg=2540323]
Opened filament:
[attach id=3 msg=2540323]




-
Day 3, part 2.
Small tools are MUCH easier to carry, thus I'm able to keep better track of using 'em. I can carry the Squirt in my shorts all day and not notice it.
Cut the bent end off filament with the Squirt P4, and later the Swiss Tech--as the Squirt and my phone were on the work table, not the folding workbench where my printer is set up.
[attach id=0 msg=2540324]
Found a file for a belt holster for the Squirt P4, but the version I printed was for a narrower belt than my old farm store "Made in Mexico" belt, so I'll have to do another. May do internal supports to make the insides of the belt loop and sheath cleaner.
Holds decently, but I think I'm gonna do the wide belt slot version in TPU.
[attach id=1 msg=2540324]


-
Especially in Summer wear!
@cody6268 said:
Day 3, part 2.Small tools are MUCH easier to carry, thus I'm able to keep better track of using 'em. I can carry the Squirt in my shorts all day and not notice it.
Cut the bent end off filament with the Squirt P4, and later the Swiss Tech--as the Squirt and my phone were on the work table, not the folding workbench where my printer is set up.
[attach id=0 msg=2540324]
Found a file for a belt holster for the Squirt P4, but the version I printed was for a narrower belt than my old farm store "Made in Mexico" belt, so I'll have to do another. May do internal supports to make the insides of the belt loop and sheath cleaner.
Holds decently, but I think I'm gonna do the wide belt slot version in TPU.
[attach id=1 msg=2540324]
-
Another great day everyone!!
-
@PitCarver said:
Another Gerber keychain tool.
Gerber Mini Suspension. It's more robust than the Dime. It lacks the package opener and has probably the worst nail fille I've ever seen.I believe the Mini Suspension is the same as the Clutch, which I carried for most of undergrad and some time after. Great little tool. I liked mine more than the Dime I eventually replaced it with. Can confirm the nail file isn't great (the cleaner is solid). I forget what happened to it. Probably just abused the little thing too much. That was before I got into full size multis, so I definitely asked it to punch above its weight sometimes.
Day 4
Barry has it right. This is the kind of thing I missed last month carrying only knives last month. See a loose screw? Fix a loose screw. Done and dusted.

-
It's a multi tool made by United Cutlery for The Fast and Furious Movie Franchise. It' definitely not worth the money this seller is asking for. There was another one on FleaBay that was going for about $15. That's more reasonable in my opinion.
<u>Day 4</u>
Package and mail duty today. It was also a quick reminder that I need to give the little blade some TLC as it ripped through the envelopes more than slice through them.

-
Day 5
Swiss+Tech made it down to the Dollar Tree. Back when I carried this same plier thing for 15 days, I went out of my way to tighten something or whatever. Just so I could say I used it for stuff. So far, nothing has arisen that would legitimately allow the usage of this thing. I carry it and check now and then to see I haven't lost it.Best wishes. G

[attach id=0 msg=2540342]
-
DAY 5: I got this tool used, so I can't say how good the scissors used to be. My guess is that they were never as good as Vic Classic scissors.
[attach id=0 msg=2540348]

-
That's how I keep the house intact Gary...the challenges keep every nut, bot, screw, etc. tight!! 😂
Swiss+Tech made it down to the Dollar Tree. Back when I carried this same plier thing for 15 days, I went out of my way to tighten something or whatever. Just so I could say I used it for stuff. So far, nothing has arisen that would legitimately allow the usage of this thing. I carry it and check now and then to see I haven't lost it.Best wishes. G

[attach id=0 msg=2540342] -

@BPRoberts said:
I believe the Mini Suspension is the same as the Clutch, which I carried for most of undergrad and some time after. Great little tool. I liked mine more than the Dime I eventually replaced it with. Can confirm the nail file isn't great (the cleaner is solid). I forget what happened to it. Probably just abused the little thing too much. That was before I got into full size multis, so I definitely asked it to punch above its weight sometimes.Day 4
Barry has it right. This is the kind of thing I missed last month carrying only knives last month. See a loose screw? Fix a loose screw. Done and dusted.
-
Powernoodle Day 5
- Barry Rowland
- Farmer X
- PitCarver
- ReamerPunch
- lazar
- Cody6268
- LoopCutter
- IMR4198
- Echotech
- Fireman
- AzteCypher
- JonesE
- powernoodle
- Gra_farmer
Like Rosie Ruiz, I am joining the race late.
I will add 4 catch-up days on the end.I am happy to take the Lucky 13 slot.


My current favorite production model in this class is the NexTool S11 series. Its right up there around the Squirt in terms of design and manufacturing, IMO. Though just slightly larger. The Pro version adds a blackwashed finish to the tools.*Legacy pics:
*



You know you want one.

-
:ahhh :ahhh
:ahhh :ahhh -
Welcome aboard PN! It is great to have you join the challenge.
JonesE
-
-
Day 5
[attach id=0 msg=2540377]
I want the PS to be successful, not having a blade will be an uphill CHALLENGE 😉
Last night late, I stumbled upon my SWISS TECH, screwdriver tool. With a NiteIze flat tool attached. Been years since I had this on my work keys!
So pairing it up with the PS before I yield to the plier-tool or Sheffield (Micra lookalike)
[attach id=1 msg=2540377]


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

