Keychain pliers tool Challenge (August) 2025
-
-
It's been raining here today and all I'm doing is sitting on the front porch.
¯\_( ͡° ͜ʖ ͡°)_/¯
-
Powernoodle Day 10

*Strange that many of my uses and pics involve food. *

-
@PitCarver said:
It's been raining here today and all I'm doing is sitting on the front porch.
¯\_( ͡° ͜ʖ ͡°)_/¯Love the character your Dime has developed. I imagine it has quite a bit stories it could tell.
@powernoodle said:
Powernoodle Day 10*Strange that many of my uses and pics involve food. *

Nothing wrong with that except you are making me hungry for lunch.
JonesE
-
Day 10 +
Thought to be a quiet day, then a soft bang!
Isolated to laundry room, my washer door restraint broke and the washer door hit the room door!
Needed to make a new restraint and used the Sheffield’s pliers to remove the broken band. Then fashion a new restraint and installed
[attach id=0 msg=2540868][attach id=1 msg=2540868]
Did not need the blue band this time, for another repair. 😉


-
Woke up this morning with a migraine. It has been really hard to get going. So most likely no action with the Dime today. If Imcan get going I will start installing leaf guards on the gutters. We will see.
JonesE
Sorry to hear about the migraine. Hopefully it goes away quickly.
@powernoodle said:
Powernoodle Day 10
*Strange that many of my uses and pics involve food. *

Nice snack. Dark cherries are a healthy as well as good.
-
I forgot about Tetris!
@LoopCutter said:
Now that reminds me, I think I have the Walkman equivalent in a dresser drawer, along side a garage sale find, a Tetris game. -
Great job!!
@LoopCutter said:
Day 10 +Thought to be a quiet day, then a soft bang!
Isolated to laundry room, my washer door restraint broke and the washer door hit the room door!
Needed to make a new restraint and used the Sheffield’s pliers to remove the broken band. Then fashion a new restraint and installed
[attach id=0 msg=2540868][attach id=1 msg=2540868]
Did not need the blue band this time, for another repair. 😉
-
Day 10
Glamour shot
-
Nice pic Sherry! It looks peaceful.
-
Day 10
Just like home, tightening up the nightstand drawer.

-
@IMR4198 said:
I think I used the last of the garlic that I had hanging outside my back door to make some spaghetti. Might need to buy some extra garlic. One or two of those big braided ropes of garlic like you see with the leaves all plaited together. G
:(Might want to pick up two of those. One for the front and one for the back. Can't be too careful now-a-days.
<u>Day 10</u>
Working on a little project to replace the PRAM battery on my old (supposedly antique
) Powermac G3 Blue & White with a coin battery and a 3D printed holder. Used the mini-blade to cut out the coin battery.
-
Day 11

-
Day 11
I did a little modification to my weedwacker. See the black corrugated sleeve right behind the loop handle? I'm not sure why the Stihl people put that thing on there like they did. It is roughly on the balance point. Good for carrying the tool, right? Wrong. The weight of the motor is above the centerline and the sleeve is loose on the shaft. When you pick it up, the motor flips upside down. Suddenly, at that. I slid the loop handle and sleeve forward. Then I wrapped duct tape around the shaft and forced the sleeve back into place. Now it fits tight and you can't see where the tape is either. The tool is running and working, but this fall I think I will take it back to the shop. It is doing a couple of things that it shouldn't. No point in taking it in now and letting them put it in a rack somewhere for a couple of months. While the weeds are still growing.Best wishes, G
[attach id=0 msg=2540907]
-
Day 11: Tightening the knob on a cabinet with the straight edge. It's the little, day to day jobs where any keychain tool shines, be it a Dime, Classic, etc.
Gary, I've yet to find a trimmer that I could find a happy spot for that handle. Great work!
Looking good everyone!

-
DAY 10. I fell asleep early last night and forgot to post this. SwissTech and another tool for adjusting things.

Just joking, folks. The "metallic knuckles" are legal here, but I use them as a paperweight.[attach id=0 msg=2540920]

-
DAY 11 started in a bit of a :ahhh because I could not find my PS4 :ahhh :ahhh :ahhh
After a careful search, I found them, but it illustrates why these would be better carried on a keychain.
[attach id=0 msg=2540922]

-
Day 11
The NEXTOOL has pocket duty today.
I did change the lanyard loop color to yellow and while upstairs, a dresser knob feel into my hand. The Phillips did fit the screw head and start the thread, but straight tip tightened so a repeat should not occur for another 30 years.[attach id=0 msg=2540931]

-
I did a little modification to my weedwacker. See the black corrugated sleeve right behind the loop handle? I'm not sure why the Stihl people put that thing on there like they did. It is roughly on the balance point. Good for carrying the tool, right? Wrong.~
I do not believe the black corrugated piece is a handle cover. I do believe it is shipping material to protect the end of the shaft during shipping!
It should have been removed before the shaft was mated with the motor housing.
For me, I must position my shaft handle close the motor housing, otherwise I am bent over like a bean picker working the fields.
Stihl makes a good weed wacker, I just wish I got a straight shaft. I now hate watching my grandson bending over when wacking the edges 😉
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
