SAK-A-Like / Off Brand Challenge - September
-
I've cut a few with one. They're super cutters!
@AzteCypher said:
<u>Day 6</u>The Imperial Camper Knife didn't do a bad job cutting the cigar in spite of me.

-
I like that Cody!
@cody6268 said:
Day 6: Two mail-calls.The Lledo RNLB Garside (Tyne-class Lifeboat) is tough to find in the States, though a few were brought back as tourist trinkets. I paid $2 shipped for this one off eBay from an eBay seller in CO.
I think Garside was the debut. It was produced for Kimberly-Clark (who if I recall, paid for the boat to be built) on behalf of the Royal National Lifeboat Institution. The box still has a RNLI price tag of GBP 2.50. Over 2-3 years, Lledo did most of the Tyne-class--most of the time, with an ad for the sponsor of the boat on the plinth.
[attach id=0 msg=2543080]
And another package showed up unexpectedly. Long story short, we've had a ton of problems with UPS lately. A neighbor of mine called on his way out from my place, saying he found a package with my name on it--a quarter-mile from my place on an old farm near no address whatsoever. We suspect the owners (my estranged Dad and his second wife I might add) of that property (who without our permission, blocked the driveway on our property with a gate) complained because the UPS guy recently started going through that gate to leave packages on my porch. I've tried to get someone at UPS to get to the bottom of this issue, but so far, nothing's worked.
That package contained some tools I ordered from Caterpillar--drop-shipped through our local dealer. No shipping notification or phone call and I actually checked my CAT account this morning--and it was still saying "processing"--makes me wonder if UPS picked it up on the way out--they're on the same road as the CAT dealer.
Most are rebranded Snap-On, though it appeaers the 213-1983 (6-inch) are actually rebranded Channellock (with exclusive black grips).
[attach id=1 msg=2543080]
-

@matzesu said:
The other 2 Knifes in my Pictures are no Bökers, there are Victorinox ..
will post later today my small Böker and SAK Alike Collection..
I will this week have time to test out how good the Böker SAK really is.. But I find it’s allready quite cool
And thumps up for David Bowen, get well soon, i hope One Hand Open Knifes are allowed to carry in your Country.. , peaple whit One Hand should get an Expection from German §42a.. -
Day 7: KP!

-
If Loop Cutter had the deluxe three layer stainless steel model instead of the single, he would have had some other tools on his Sak-a-like. Here are the excellent scissors on mine. This is the usual state of them after you fold them up. No, they won't cut paper, and the spring has sprung whatever flex it once possessed. The blade is marked Stainless, and it might be. The rest of the implements have rust on them. The stainless steel scales with the black plastic nubs look just fine. I have cut up some apples with it and a few oranges. Best wishes, G
:D [attach id=0 msg=2543113]
-
Still, there's scissors on knives and tools that cost a lot more that should cut but can't.
@IMR4198 said:
If Loop Cutter had the deluxe three layer stainless steel model instead of the single, he would have had some other tools on his Sak-a-like. Here are the excellent scissors on mine. This is the usual state of them after you fold them up. No, they won't cut paper, and the spring has sprung whatever flex it once possessed. The blade is marked Stainless, and it might be. The rest of the implements have rust on them. The stainless steel scales with the black plastic nubs look just fine. I have cut up some apples with it and a few oranges. Best wishes, G
:D [attach id=0 msg=2543113] -
True, I'm sure. I wasn't expecting much from a Dollar Tree knife. I don't think the store sells knives now, or anything else that costs just a buck. Best wishes. G

-
Day 7
Task failed

I needed to open a new bottle of fabric glue. That involved snipping the applicator, snd the instructions on the bottle suggested using scissors.
It turns out that the scissors weren’t really getting a good purchase on the plastic, and to make matters worse it seemed like it wouldn’t snip it squarely.
So then I thought about poking a hole.
But that proved impossible due to the sheepsfoot configuration of the blade, and the angle at the pokey end being too obtuse.So I ended up using the awl of a Victorinox Trekker (trying to stay somewhat true to the challenge by not using the Pioneer X, but also recognizing that the tip of that one would not be as good as the cellidor version))

-
@Barry Rowland said:
That saw blade reminds me a lot of the Signal saw. That brew scene looks so good! ☕☕Thanks. I love brewing my coffee outside with my twig stoves when the day allows.
@IMR4198 said:
If Loop Cutter had the deluxe three layer stainless steel model instead of the single, he would have had some other tools on his Sak-a-like. Here are the excellent scissors on mine. This is the usual state of them after you fold them up. No, they won't cut paper, and the spring has sprung whatever flex it once possessed. The blade is marked Stainless, and it might be. The rest of the implements have rust on them. The stainless steel scales with the black plastic nubs look just fine. I have cut up some apples with it and a few oranges. Best wishes, G
:D [attach id=0 msg=2543113]Scissors are one of those tools that are so useful when done well and frustrating when they don’t work. Scissors are also one of those tools it seem most makers can’t do as well as SAK.
Like to keep one of these mini lighters on my keychain, figure when you’ve got a MT, in my case a Rambler, a small flashlight and fire, you’ve got quite a few bases covered
SAK (or similar), flashlight, lighter are a very useful trio. -
Day 6
When I got this LionSteel Jack 2, I had strongly considered the Jack 3 (which adds a corkscrew to the Jack 2) instead.
Normally, it would be an easy call for me to get the tool with more functions assuming it didn’t add much weight or bulk. However, I was fortunate enough to be able to handle both before buying, and found the corkscrew to be quite obtrusive on the Jack handle. While I hadn’t had this issue with 91, 85, or 84 mm SAKs, I went ahead and got the Jack 2 over the Jack 3, and haven’t regretted it yet.

-
Day 7 of 30
Today no usage, T4 was on pocket waiting job to do but didnt find any use of it.
[attach id=0 msg=2543130]

-
DAY4:
Had sadly nothing to do where I would had need to use an Multifunktional Pocket Knife sadly, so maybe no Picture today.., was a lacy Day anyway, I went in the Garden to watch the Bees flying out an in there Hive, check how bad the Situation on the Asian Hornets really is: I saw maybe 2 to 3 European Hornets (you know these giant but quite chilled Wasps , these sound quite dangerous, but they are actually quite kind, as long you are not an Wasp or an Bee.. , im still a bit confused: In the USA there are the Yellow Jackets, are these Hornets or Wasps? They are a lot more aggressive there,
I never had any issues whit them in Europe, but there is now this new Asian Hornet which is a thread for the European Insect because its quite invasive and spread quite fast, and they are an big issue ..I wonder what would happen if I would have to open a Can in these 30 Days of the Challenge? The Techtool don't have an Can Opener, so I would need to use the Can Opener on my Swisstool,
Or are im already out of the Challenge because I have the Swisstool and the Minichamp the whole time also in my Pocket EDC? , I only used the Nail Cleaner on the Minichamp the last few days,..
-
Take care of yourself, Dave!
Day 6
I think this is the largest Amazon box I have ever knifed. My wife ordered some luggage.

-
Day 7
I woke this morning thinking! Yes, stupid as it sounds, about this challenge. How Victorinox and WENGER made Swiss Army Knife’s, who was first? How and why the world copied their success, making SCOUT KNIVES, then cheap made look alike flooded the inexpensive market, cheap is as cheap does. And, the SWISS companies just kept plugging along doing what they do.
Then other knife makers add a bottle opener to a knife handle, is it really a SAK-a-like?Or, WENGER partnering with BUCK, are Swiss Bucks SAK-a-Likes? Or legit SAKs?
That kind of thinking!Then found this utensil set, a Christmas gift from a grandson, from school holiday store, these are all metal construction, can opener on Fork, bottle lifter/screw driver on the spoon, and combo edge knife blade!
[attach id=0 msg=2543141]
Staying with crossed out Camillus again today. Carries very well, blade cuts and awl’s point is a little flat blade screw driver, or flat micro chisel! Locks in place by a liner tab just like on TL-29 or Cub Scout knife.
And a bonus picture with utensils fold into handles. Colors are vibrant! 😜
[attach id=1 msg=2543141]
Plus there is sturdy pouch to pack these together, for glove box, back pack, lunch pail, desk drawer.
A lot of thought was put into this selection by grandson, as I was traveling a lot when he purchased this gift. ☺️

-
My understanding is that Vic developed the 1890 Soldier and Wenger produced them to spec a few years later. And while Vic is the company that codified the modern scout, I think there's evidence of similar knives (mostly German) predating it. Swissbuck is a "legit" SAK in my book. Wenger made them, Buck just sold them.
Day 7
Touching up the edge on the Spyderco Sharpmaker. I've heard some people prefer a "rougher" edge (lower grit) on their knives, saying it'll keep longer. I don't believe everything I read on the internet, but if y'awl tell me that's how it works I'll buy it.
[attach id=0 msg=2543145]

-
Thanks to all for the kind words, and wishing David a fast and full recovery!
Day 6 (catching up)
I came up with a new use for a back-layer Phillips: loosening a very tight knot in a plastic bag.
[attach id=0 msg=2543146]
Day 7
Paper towel dispenser keys have an uncanny ability to grow legs and walk away.
[attach id=1 msg=2543146]
I was able to use the Swiza's cap lifter to get into this one. And that may not be the first time I've had to employ that trick.

[attach id=2 msg=2543146]

.jpg)
.jpg)
-
I tried to download a .pdf of the new Swiza catalog. I thought I had but instead had a copy of their customization catalog. Says Customization right on the first page. Polished tools, matte tools, black tools, some peculiar textured rubbery scales, and other upscale fancy things. Some are catchy in appearance. Scales on some are held on with screws. Many choices for changing the appearance of whatever you order. Work is supposedly done in-house or by sub-contractors.
Interesting anyway. Now I will try to find a catalog of standard models. Best wishes. G

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login