SAK-A-Like / Off Brand Challenge - September
-
Day 10
Two package envelopes arrived late in the afternoon that were fetched from mail box early this morning.
Camillus Crossout DD I’d honors freeing contents.
[attach id=0 msg=2543322]

-
Official it’s day 10 of the Challenge, I think i made 4 accurate posts now, even though I did bought me even an Alternative Multi Functional Knife for the Challenge I find myself lots of evenings in bed whitouth making any pictures.. so might be I will not pass the challenge just because I can’t find the time to work on it..
Even though I will not get the batch then, at least it was a reason for me to buy me this Böker Techtool which is actually a quite nice piece of equipment..
I will definitely post pictures, but might be I’m allready out of competition..(Also I’m allready did use the,Nail Cleaner on my Minichamp, and the Paket Opener Edge on my Swisstool Spirit..
-
Day 10
Opened a bag of candy at work to share. The scissors did the job but not as cleanly as Victorinox scissors.
Funny thing happened though. I had the same small can of tuna that I needed to open - the one that splashes fish juice all over the place because it’s too small to peel open with the pull tab. I thought I was being silly by using a tool to open it so I figured I’d try to act normal and just open it by hand. Mission failed successfully. I got the can open and splashed fish parts all over the place including my eyeball.
Next time I will be more careful.
-
Day 9
The blade on the LM T2 is pedestrian 420HC.
It locks with the same interesting mechanism that locks all the other tools.
OHO is not well done though. The blade has too much resistance to opening, and the thumb hole is too small/not designed correctly. Sometimes I am able to OHO it; other times I resort to 2HO.

-
Day 10
While the edge of the T2’s awl is sharp, the point is inexplicably not. It looks to me like it is flat on purpose.
I just don’t understand the logic.
Decide to make a KBMT with only four tools ->

Decide one of those tools should be an awl ->

Decide the awl shouldn’t have a sharp point ->


-
I'll try it buddy and thanks!!@LoopCutter said:
I saw a suggested procedure if you use natural peanut and how to avoid having to stir it because of separation.Place the jar of natural peanut butter in the refrigerator, stored LID SIDE DOWN!
Does not separate or if it does, it is at the bottom when you spoon it out. It from a smoothie person too!
-
@nate j said:
Day 10While the edge of the T2’s awl is sharp, the point is inexplicably not. It looks to me like it is flat on purpose.
I just don’t understand the logic.
Decide to make a KBMT with only four tools ->

Decide one of those tools should be an awl ->

Decide the awl shouldn’t have a sharp point ->

It's so (like all Leathermans) they can say there's another flathead. It's stupid.
Day 10
The eternal battle against loose drawer knobs.

-
Day 9 (catching up)
Yesterday was a hellaciously busy day for me, and to be fair, these photos were taken the night before. But I got some awl usage in.
[attach id=0 msg=2543365]
Nate and Bob noted that the Leatherman T2's awl needs a rethink. The same is true for the Swiza's awl. It's too short to go completely through a nicotine pouch can (though in their defense, boring holes in such things is not typical awl usage). The awl is difficult to extract from the cut material if it goes in too deeply. And check out the jagged hole it leaves behind! :o
[attach id=1 msg=2543365]
Day 10
Is that a countertop? What the smurf is ol' Farmer X doing? And where is he?

[attach id=2 msg=2543365]
.jpg)
.jpg)

-
@BPRoberts said:
It's so (like all Leathermans) they can say there's another flathead. It's stupid.Wow. Upon closer inspection of the LM website, you’re absolutely correct. That is stupid. And in violation of what should be a basic MT design tenet: secondary functions added to tools should not compromise the primary function.
But, this may not even be the worst design choice on the T2. Stay tuned!
-
@nate j said:
Day 10While the edge of the T2’s awl is sharp, the point is inexplicably not. It looks to me like it is flat on purpose.
I just don’t understand the logic.
Decide to make a KBMT with only four tools ->

Decide one of those tools should be an awl ->

Decide the awl shouldn’t have a sharp point ->

My Camillus Crossout as a very similar awl or as I have seen them callout as Punch tools as well.
[attach id=0 msg=2543367]
-
@IMR4198 said:
I think my Ruff Rida is falling apart. I took a photo of the outrageously pointy awl in the pocky nife and noticed that the shackle had FALLEN OFF! Completely gone. Pivot pin and all. I hope I don't step on it.It's a shame it "fell apart". Guess they don't make them like they used to. ;)
That's a nice looking Pradel!

@Barry Rowland said:
It's pumpkin season in the stores!Already bought the wife her pumpkin spice coffee. :D
@matzesu said:
Official it’s day 10 of the Challenge, I think i made 4 accurate posts now, even though I did bought me even an Alternative Multi Functional Knife for the Challenge I find myself lots of evenings in bed whitouth making any pictures.. so might be I will not pass the challenge just because I can’t find the time to work on it..Even though I will not get the batch then, at least it was a reason for me to buy me this Böker Techtool which is actually a quite nice piece of equipment..
I will definitely post pictures, but might be I’m allready out of competition..(Also I’m allready did use the,Nail Cleaner on my Minichamp, and the Paket Opener Edge on my Swisstool Spirit..
No worries at all matzesu. If you can catch up, great! If not, no worries. We do this for the fun of it just to see what we can accomplish. Cheers!

-
<u>Day 10</u>
My buddy Ivan sent me this really cool Mikov Stovka. Many thanks again Ivan!
The blade just needed a quick touch-up and it made quick work of package opening. The corkscrew can in handy for improving the draw on the cigar.


-
I like that corkscrew idea :D
-
The chisel point style awl does make a hole.
[attach id=0 msg=2543372]

-
Day 10:
ISC Discovery (Adler for Schrade, I think). I bought this one from a member here for the inaugural SAK-Alike/Off-Brand challenge I did here. Quality is decent--to the point it's them or Mikov in terms of non-Swiss "SAK-alikes" that I personally like.
I carried it alongside a Cattleman's Cutlery Cowhand Medium Stockman I picked up earlier today at a local farm and feed. They were a Case dealer for many years, then phased that out for the Chinese Old Timers (which tend to have poor quality and steel) 5-6 years ago. Noticed they recently started phasing those out for two ABKT sub-brands, Roper and Cattleman's Cutlery. These are a little bit cheaper than the Old Timers, but several times better in quality, fit and finish, and sharpness out of the box. Also, they use 8Cr13MOV--a bit nicer than most low-cost traditional folders.
Tools used: both blades and saw.
[attach id=0 msg=2543373]

-
Day 11

-
Day 10
Yes, it is my day 10... I mislabled yesterday as Day8.

-
<u>SEPT 11</u>
Swiss+Tech...whatever they call it. If the LM T2 is a SAK-alike, this is a SAL-alike clone, but maybe with a better tool selection. :-\ The down side is that they are "come one, come all" when you try to choose one.
[attach id=0 msg=2543388]

-
Day 11
I might have to mow one more time this year. Haven't decided yet. I don't mind if the grass is a little long over the winter. Keeps the mud covered better. Ruff Rida and some cinnamon toast. Could make a good movie title: Rough Rider....Unshackled. Barton Fenmore breaks out of prison, where he has been set up for the murder of his fiancée's wealthy rancher father. He dons a mask and rides for justice with his faithful companion Little Otter and his palomino Rexistopheles. Rex for short. Usual nickel plated six-shooters that each can shoot 47 times without reloading. Standard B-movie issue. Neither is capable of inflicting a fatality. Only 'flesh wounds' generally in the shoulders. Those sorts of injuries are treated with a bottle of red-eye and a Bowie knife heated over a fire as the only surgical instruments.Best wishes,
G
[attach id=0 msg=2543390]
-
That works Gary! Nothing so exciting this way.
Day 11: Opening up the vent on a cup of coffee with the Camillus awl.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
