Broken car
-
Sorry to hear that Antii. I hope you can get it fixed for not too much

-
The nice thing of older vehicles, most of mine I could repair most things, the mini vans were a little rough around the engine since half of it was under the dash, just to change the air filter was such a hassle, but to change the belt was a 15min job,
JR -
Well, I hate to be a downer, but the car is 21 years old. It is suffering wear-out and age-related failures, and will likely continue to so at an increasing rate.
Time to say goodbye to it and acquire a newer replacement.
-
@nate j said:
Well, I hate to be a downer, but the car is 21 years old. It is suffering wear-out and age-related failures, and will likely continue to so at an increasing rate.Time to say goodbye to it and acquire a newer replacement.
Thats true, im allready looking new cars what can replace my Stilo.
-
Grok says that vehicle does have an "interference engine", where the valves can be damaged by the pistons when the timing belt breaks. Hope not, sir. Good luck.

-
Someone said on fiat forum that you dont need to fill lottery ticket if valves arent broken since you have used all luck allready.
-
I don't know who or what Grok is, but if Grok is correct, the car is likely done for. (Valves and pistons colliding would almost certainly have been very audible.) A labor rate of 100 Euros/hour is a pretty fair ballpark estimate. An engine replacement is a time-consuming process even for a factory-trained technician. Never mind the cost of an engine...that could be either a lot of money for a new or remanufactured engine or a big gamble on a used one. I'm hoping that Antti won't need a new engine, yet at the same time, I'd advise him to just get a new vehicle. Perhaps it's worth noting that the number of 2004 vehicles that I'd dump more than a few hundred dollars' worth of repairs into is astronomically low.
-
Grok is the AI of Elon Musk, X, etc. Its a stand-alone GPT/AI like ChatGPT, and is also integrated into the X/Twitter platform.

-
Makes sense now.

-
@Antti Lammi said:
Someone said on fiat forum that you dont need to fill lottery ticket if valves arent broken since you have used all luck allready.If memory serves only 1.2 8V Fire will not bend valves if timing belt snaps :(
How old was the belt that snapped?Sent from my iPhone using Tapatalk
-
It was around 2 years old and i have driven around 25000 km with it, most likely i wont be repairing this car anymore, im just gonna salvage parts i replaced this summer and rest of car goes to junkyard
-
@Antti Lammi said:
It was around 2 years old and i have driven around 25000 km with it, most likely i wont be repairing this car anymore, im just gonna salvage parts i replaced this summer and rest of car goes to junkyardHmm. I think 3 yrs and 3/50 000 km are normal parameters for Fiat engines of that age. Might be worth checking with the garage who did the job, or with belt manufacturer if you did it yourself.
Sent from my iPhone using Tapatalk
-
At 25,000 kilometers, that timing belt let go way too early. -
if i correctly remeber it was 3 years or 60000km before it needs change. I changed belt myself then but it doesnt anymore really matters since its broken now, maybe i got monday piece and it snapped way too early.
-
@Antti Lammi said:
if i correctly remeber it was 3 years or 60000km before it needs change. I changed belt myself then but it doesnt anymore really matters since its broken now, maybe i got monday piece and it snapped way too early.Do you recall the manufacturer? Some rumors about substandard quality do circle around
Sent from my iPhone using Tapatalk
-
Sadly i dont remember manufacturer but it was from parts store where they sold is at OEM part.
-
Sorry to hear this, Antti.
That 1.4 liter engine is indeed an interference engine.
You COULD go all "sisu" and get a rebuilt 1.4 liter engine. And have it installed. IF all the other components like transmission are ok (you said you already did suspension) and if the rust is under control.
I did that with a 1994 Chevy big Blazer Silverado 2-door with a 5.7 liter v8 "crate engine" from GM Goodwrench. Then I ran it to 300 thousand miles until the wheels fell off.
My current truck is a 2014 GMC Sierra. Original engine at 230k miles, though I have already replaced the transmission at a cost of $5k at 175k miles. Its paid off. So I'm considering what I'd do in a number of "what if..." situations
Either way, best of luck. That old Fiat doesn't owe you a thing.
By the way, my very first car was a 1974 (76?) Fiat X19, mod engine, targa roof. This was in the year 1988. I think I made it back to the house and maybe one or 2 other trips and never managed to get that thing on the road again. If I knew then what I know now, I could have fixed and maintained such a simple car. Back then, I just did not have those types of skills
-
Dang sorry to hear that Antti! Let’s hope no bend valves. Do you know what RPMs you were running when it happened? It’s a pretty good chance there’s damage if you were above 2K RPM (I think at least). I wonder if you had any slipping first?
We used to have a 2007 Toyota Yaris and the belt slipped the worst before shifting from 2nd to 3rd. It didn’t have a tachometer so we just had to feel for it based on speed. Thankfully it didn’t break but because the teeth had worn over the years it likely would’ve soon snapped.
-
We dissambled it and found out that 10 valves were broken, luckily pistons were undamaged so there could be chance to repair it but im still looking new car.
-
Ten bent valves is quite a number. I'm assuming four valves per cylinder? It's likely that some damage was done to the head as well, so I'd say a new vehicle is a better bet, especially if the old FIAT is showing the effects of salted roads.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login