Fixed Blade Challenge October
-
Day 26
Buck Paklite 631 Field. A bit big for pocket carry, but not undoable. It's exactly what it says, a light but sturdy basic field knife. I think if this was in my regular camp rotation I'd probably redo the handle with paracord like I did on the other Paklite.

-
Day 24
This unusual knife is a hori hori (Japanese digging knife), the Nisaku Yamagatana. This modern version features DSR-1K6 stainless steel @ 58 HRC, with plastic handle and sheath.
In keeping with its purpose, the wide blade is concave on one side (not edge) and convex on the other, like a garden trowel. Both edges are sharp (which could technically get it classified as a dagger, I suppose), with one being PE and the other SE. They meet at a sharp but sturdy point.
There is quite a bit of sheath rattle, but the sheath nonetheless holds the knife securely thanks to a bump on the handle that fits into a hole on the sheath, as well as a retention strap.
Very reasonably priced IMO at around $20 as of this writing.


-
Very interesting shop nate
-
It sure is amigo! My first one and I'm really liking it. Though the picture makes it look white, it's actually a light grey with green accents. I'm really digging it.

Glad you're feeling better. I had mouth surgery many years ago but it took me several days for a full recovery. No fun. :-[
-
-
Day 26
I opened some Wiley Wallaby!
[attach id=0 msg=2549640]

-
@Alan K. said:
The Schrade USA 152. From the scrimshaw series...I do like the scrimshaw, but I'd probably be too worried about the decoration wearing off.
I seem to remember you saying that the Essential is MagnaCut. If so, have you tried sparking a ferro rod with it?
@BPRoberts said:
I think if this was in my regular camp rotation I'd probably redo the handle with paracord like I did on the other Paklite.
Those "half-scales" fly in the face of my all-or-nothing mentality.@nate j said:
Both edges are sharp (which could technically get it classified as a dagger, I suppose)...Yes, it would almost certainly be considered a "per se 'dangerous weapon'" in Michigan. Which is a shame, as it's quite an interesting (and affordable) tool.
@AzteCypher said:
My first one and I'm really liking it.I haven't had an ana-digi G-Shock, but someday I might get one. I'll head over to Shockbase soon and try to determine what model yours is.

Day 27
As promised, here are the other things that came with my Izula II. Top row: cord-lock (which I'm not fond of), snap hook, and magnesium stick/ferro rod combo (untested as of this post). Second from top row: whistle (two parts; not very loud, but then again, I didn't want to get too crazy with it) and split rings. Underneath those items is a length of paracord. At bottom are the two survival tips cards. And finally, an instructional leaflet is at right. Those few items could probably help out quite a bit in the wilderness, though I feel they should be supplemented.
[attach id=0 msg=2549706]
Going through the leaflet inspired me to try a new carry method.
[attach id=1 msg=2549706]
There is quite a bit of movement when using this method, as is to be expected, but it isn't obnoxious is you place the rig correctly. I definitely recommend placing the carabiner on a belt loop that's against your hip. Three points of motion make for a very easy draw, but you'll need both hands to return the knife to its sheath. I have no worries that the knife will fall out of its sheath, as it's very secure.
[attach id=2 msg=2549706]
As an added bonus, the clip plate holes are freed up for carry of other things. I briefly had the fire-starter there, but its length meant that it worked better in the large hole near the blade.
[attach id=3 msg=2549706]
.jpg)
.jpg)
.jpg)
.jpg)
-
Day 25
Make: Gerber
Model: Unknown
Steel: Unknown
This cute little knife was a freebie when I ordered something else. The knife itself doesn’t seem awful; unfortunately the craptastic sheath will keep me from ever carrying it.

-
Gerber<u>[u] Dibs</u>[/u]. Don't know anybody that likes Gerber sheaths, unfortunately.
-
Day 26
This is the Benchmade Anonimus, featuring CPM Cru-Wear steel at 63-65 HRC and G10 slabs.
Benchmade takes advantage of the extreme toughness of this steel to make the blade thinner than typical for bushcraft/fieldcraft/survival knives. This results in a lighter weight (under 6 ounces) than might be expected of a 5” blade, and the whole knife feels well-balanced, comfortable, and quick in hand.
It comes with an excellent sheath, easily passing the shake test with no secondary retention and zero rattle. The firesteel loop and belt loop are both attached by screws, so easily removed if desired. Because of this, it could be reconfigured for LH carry.
Overall, a really solid knife and I feel bad I don’t carry it more.

-
Day 27
Today's carry is a DPX H.E.S.T. (for Hostile Environment Survival Tool) which I used to cut down a palm frond. Belt carry is problematic with these because of the sharp pry bit at the end of the handle. If you try to belt carry this without having it in a full flap sheath that sharp little appendage will rip your shirt and the back of any couch or chair you try to sit in to shreds, and it is the reason I don't carry this knife very often. I keep thinking I should grind it off because, frankly, I've never found myself needing to pry open a wooden crate in the middle of a jungle before and it doesn't seem likely that I will. Other than that, the H.E.S.T. has one of the most comfortable handles that I've encountered in my EDC fixie search. It really fits well in the hand as Robert Young Pelton, its designer, took everything into consideration based on his years of experience in the field.


-
I wish more companies would do "multitool" fixed blades. Aitor makes knife/wrench/opener/prybar that I wish I'd seen earlier in the challenge, but there's not a lot around. I can see how that big ol' end could be a pain in the butt (possibly literally).
Day 25
Case Finn. It's a hell of a slicer, but that scrawny blade on a beefy handle awlways makes me laugh.

-
Day 26
Esse 4 in 1095 .
Used today to open some 9v batteries . I always renew my smoke detectors/ Carbon Monoxide detectors around the fall back hours change this coming weekend.

-
@BPRoberts said:
I wish more companies would do "multitool" fixed blades. Aitor makes knife/wrench/opener/prybar that I wish I'd seen earlier in the challenge, but there's not a lot around. I can see how that big ol' end could be a pain in the butt (possibly literally).Aitor, you say? I might have to check it out.
@Farmer X said:
I do like the scrimshaw, but I'd probably be too worried about the decoration wearing off.
I seem to remember you saying that the Essential is MagnaCut. If so, have you tried sparking a ferro rod with it?The wearing off is an issue over time and with handling
I hadn’t yet tried to use the Magnacut Essential as a striker, so good idea. From my experience, the spine angle has more of an impact than steel type when used with ferro rod.
Day 27
The Essential lit my alcohol stove for coffee. The spine edge worked easily as the striker.
-
Day 27
My pumpkin carving tools: a large, strong, one-piece metal serving spoon; Victorinox 4” paring knife; Frosts Mora 6” boning knife

-
Day 28
Brissa Crafter.


-
@nate j said:
The knife itself doesn’t seem awful; unfortunately the craptastic sheath will keep me from ever carrying it.I think that's an accurate assessment. A new sheath would work wonders for that knife.
@BPRoberts said:
That scrawny blade on a beefy handle awlways makes me laugh.It made me laugh, too. Maybe this is a bit harsh, but it looks like a committee design project gone awry.
@Sos24 said:
The Essential lit my alcohol stove for coffee. The spine edge worked easily as the striker.That's good to know. My ferro rod striking technique is likely in need of improvement.
@Alan K. said:
Brissa Crafter.Is that linen Micarta?
Day 28
No use for the Izula II today. I'm hoping tomorrow will be a different story.
[attach id=0 msg=2549883]

-
I believe that is linen Micarta.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


