Fixed Blade Challenge October
-
Day 26
This is the Benchmade Anonimus, featuring CPM Cru-Wear steel at 63-65 HRC and G10 slabs.
Benchmade takes advantage of the extreme toughness of this steel to make the blade thinner than typical for bushcraft/fieldcraft/survival knives. This results in a lighter weight (under 6 ounces) than might be expected of a 5” blade, and the whole knife feels well-balanced, comfortable, and quick in hand.
It comes with an excellent sheath, easily passing the shake test with no secondary retention and zero rattle. The firesteel loop and belt loop are both attached by screws, so easily removed if desired. Because of this, it could be reconfigured for LH carry.
Overall, a really solid knife and I feel bad I don’t carry it more.

-
Day 27
Today's carry is a DPX H.E.S.T. (for Hostile Environment Survival Tool) which I used to cut down a palm frond. Belt carry is problematic with these because of the sharp pry bit at the end of the handle. If you try to belt carry this without having it in a full flap sheath that sharp little appendage will rip your shirt and the back of any couch or chair you try to sit in to shreds, and it is the reason I don't carry this knife very often. I keep thinking I should grind it off because, frankly, I've never found myself needing to pry open a wooden crate in the middle of a jungle before and it doesn't seem likely that I will. Other than that, the H.E.S.T. has one of the most comfortable handles that I've encountered in my EDC fixie search. It really fits well in the hand as Robert Young Pelton, its designer, took everything into consideration based on his years of experience in the field.


-
I wish more companies would do "multitool" fixed blades. Aitor makes knife/wrench/opener/prybar that I wish I'd seen earlier in the challenge, but there's not a lot around. I can see how that big ol' end could be a pain in the butt (possibly literally).
Day 25
Case Finn. It's a hell of a slicer, but that scrawny blade on a beefy handle awlways makes me laugh.

-
Day 26
Esse 4 in 1095 .
Used today to open some 9v batteries . I always renew my smoke detectors/ Carbon Monoxide detectors around the fall back hours change this coming weekend.

-
@BPRoberts said:
I wish more companies would do "multitool" fixed blades. Aitor makes knife/wrench/opener/prybar that I wish I'd seen earlier in the challenge, but there's not a lot around. I can see how that big ol' end could be a pain in the butt (possibly literally).Aitor, you say? I might have to check it out.
@Farmer X said:
I do like the scrimshaw, but I'd probably be too worried about the decoration wearing off.
I seem to remember you saying that the Essential is MagnaCut. If so, have you tried sparking a ferro rod with it?The wearing off is an issue over time and with handling
I hadn’t yet tried to use the Magnacut Essential as a striker, so good idea. From my experience, the spine angle has more of an impact than steel type when used with ferro rod.
Day 27
The Essential lit my alcohol stove for coffee. The spine edge worked easily as the striker.
-
Day 27
My pumpkin carving tools: a large, strong, one-piece metal serving spoon; Victorinox 4” paring knife; Frosts Mora 6” boning knife

-
Day 28
Brissa Crafter.


-
@nate j said:
The knife itself doesn’t seem awful; unfortunately the craptastic sheath will keep me from ever carrying it.I think that's an accurate assessment. A new sheath would work wonders for that knife.
@BPRoberts said:
That scrawny blade on a beefy handle awlways makes me laugh.It made me laugh, too. Maybe this is a bit harsh, but it looks like a committee design project gone awry.
@Sos24 said:
The Essential lit my alcohol stove for coffee. The spine edge worked easily as the striker.That's good to know. My ferro rod striking technique is likely in need of improvement.
@Alan K. said:
Brissa Crafter.Is that linen Micarta?
Day 28
No use for the Izula II today. I'm hoping tomorrow will be a different story.
[attach id=0 msg=2549883]

-
I believe that is linen Micarta.
-
Day 28
Case Twin Finn set. When you're carrying the larger knife, these double stacked sets are great. You get a whole second knife (albeit a small one) with basically no space cost. On the other hand, most of them don't come with a solo sheath for the smaller knife, so you're stuck shelling out for extra. In this Case (hah!) the Mini Finn's sheath is an absolute monster compared to the knife itself. I've seen aftermarket kydex for it, but never picked one up. Maybe I'll try to take some scrap leather and make something for it myself.

-
Day 28
KA-BAR D2 Extreme
Another one I must admit to buying without plans to actually carry and use…

-
Day 27
Carried the Esse 4 today. Cut a 1 inch hose for a tractor PTO.

-
@Farmer X said:
That's good to know. My ferro rod striking technique is likely in need of improvement.Not all knife spines will work regardless of steel. It has to do with if it provides a squared sharp edge. Also, some ferro rods are easier to strike than others.
@nate j said:
Day 28KA-BAR D2 Extreme
Another one I must admit to buying without plans to actually carry and use…
Some knives just call to you. I’m sure it could come in handy in the zombie apocalypse
-
Day 28
I opened up a gift the wife received in the mail from a friend, although she said she wouldn’t try them until my mouth was healed enough to try them with her.
-
-
@Sos24 said:
Not all knife spines will work regardless of steel. It has to do with if it provides a squared sharp edge.The Izula II seems to have that squared-off spine. I think the coating on mine is proving to be a hinderance for effective ferro rod striking.
@AzteCypher said:
Based on what I found online it looks to be a G-Shock model GA-110TS-8A3.It sure is. And I'm just about certain to have a smurfload of cardboard to cut up tomorrow.
-
Day 27
I carried both of these today.
[attach id=0 msg=2549943]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




