Fixed Blade Challenge October
-
@nate j said:
I would believe that. Have you tried with the Garberg?Yes. The Garberg, despite being stainless, is the best ferro rod striker I've yet found.
Day 29
Well, this wasn't the kind of use I anticipated. But I did cut a sheet of bubble wrap in half.
[attach id=0 msg=2550087]
My furniture has to wait till Monday, but the die-cast is a little safer.
[attach id=1 msg=2550087]
.jpg)
.jpg)
-
@Farmer X said:
The Izula II seems to have that squared-off spine. I think the coating on mine is proving to be a hinderance for effective ferro rod striking.The cerakote could be preventing a good strike
@nate j said:
I would believe that. Have you tried with the Garberg?The Garberg and Kansbol work well. I think Mora even specifies which of their knives have a good edge for striking because not all of them do.
-
Day 29
Buck has a great solution to the double sheath issues from yesterday. Their Paklite set can be carried as a double or as singles by removing one screw.


-
Day 28
Used the Becker 11 to open up a ZT 350 in Magnacut.


-
@Farmer X said:
Yes. The Garberg, despite being stainless, is the best ferro rod striker I've yet found.@Sos24 said:
Garberg and Kansbol work well. I think Mora even specifies which of their knives have a good edge for striking because not all of them do.Right. At one point, FX was blaming his ferro-rod striking technique. I knew the Garberg was a good striker and a knife that he owned. So, it seems like technique is fine.

-
Day 29
Bark River Bravo 1
This version features S35VN steel and Ghost Green Jade (natural; A+ for marketing) G10 slabs. With kydex sheath.

-
-
Day 29
Carried the Brisa Crafter again today. I used it to cut open a 40-pound box of cat litter but didn't take a picture.

-
Day 29
Cut some dog treats
-
@nate j said:
It seems like technique is fine.I hope so.
Day 30
For the final official day of the challenge, the thick and glossy piece of card stock met the Izula II. There was an action shot, but the phone camera smurfed it up (of course), so it wound up on the cutting-room floor.
This challenge went by pretty quickly. I won't be requesting the badge (as I doubled up on challenges this month), but I ain't done, either. I'll have final thoughts and a bonus photo for tomorrow.

-
Day 30
The Real Steel Furrier Harpoon for today. The flat sheath makes it easy to drop in a pocket and it is so light that I forget it's there.


-
Day 30
I believe this Bradford G-Necker is the best EDC/pocket fixed blade I own. This includes some popular models such as the Izula, though I don’t have a Bark River Essential. It has a good usable edge and point, is slim and simple but comfortable, easy to clean, good steel choice (mine is Elmax but I believe they are now using NitroV), and has an excellent sheath (more on this below).
I’ve made (or reinforced) some interesting observations over the course of this challenge. In no particular order:
- A pocket fixed blade (with a proper sheath) is about on par with a folder that is OHO/2HC or 2HO/OHC in terms of speed and complexity in use, as it can generally be drawn with one hand but properly and safely returning to the sheath requires both hands. Not as quick/efficient as a folder that is both OHO & OHC though.
- I feel fortunate to live in a corner of the world where carrying knives (and firearms) is generally legal and accepted. However, (illogical though it may be), fixed blades seem to get a different, more negative reaction than folders. I only got one joking “Don’t stab me, bruh!” But I was also guilty of swapping out my fixie for a folder when heading to events/locations where I anticipated it might be a problem.
- The importance of a good sheath cannot be overstated. I’m not generally a fan of sheaths for folders or MTs, but for a fixed blade they are obviously a necessity. And a good one can be the difference between a knife that is a pleasure to carry and use, and one that is unsafe, uncomfortable, impractical, and or a PITA.
YMMV, but for me a good sheath means the following:
- Kydex or comparable material. I don’t like leather sheaths for my carry blades, because I don’t want to have to worry about moisture and I want a sheath that the knife won’t cut through or penetrate, even if I fall on it.
- Holds the knife securely enough to pass the shake test with zero or very minimal rattle and without secondary retention; but not so tightly that it requires excessive force to draw. I also find a thumb ramp or similar feature helpful in getting this balance right.
- Paracard grommets or equivalent
- Generally thin and flat shape so it fits well in pocket.
- Any belt clips, belt loops, firesteel loops, etc. that may exist should be able to be removed via screws.
Thanks for a fun challenge, awl, and special thanks to BPR for hosting!

-
Day 30
For the last official day, I though I would post my favorites. The Buck 113 didn’t make much if any of an appearance this challenge, but is a great knife. The Darlington Edgecraft Sugar is a great knife, although on the larger side for me for edc. The last three are my favorites for carrying.
-
Day 29
Use the Becker 11 to make a quick PB sandwich on the road.

-
Day 28
(Mega late)I am enjoying my roach belly knives lately, this one is the new one.
[attach id=0 msg=2550269]

-
Day 2
(Late)I cut some cardboard to shim up a wobbly belt sander stand at work.
[attach id=0 msg=2550271]

-
Day 30
I bought this in 1991, I believe. I think they were on clearance from Cold Steel Special Projects. An ATC Kukri. (All Terrain Chopper. ) This baby cuts.
[attach id=0 msg=2550272]

-
<u>Day 30</u>
I agree with Farmer X in that this challenge felt like it went by quickly.
Since I'm banging away on a keyboard all day, this challenge taught me what I like in a fixie while in an "office" environment. I found out that I like something small enough that won't be obtrusive, with a comfortable sheath that I can horizontally carry, while not poking me while I'm sitting down.
From left to right, I started out with the Tonife Runer, made out of 8Cr14MoV steel with a fiberglass handle. (I feel that whoever was in charge of naming the company and the knives, needs to learn about grammar and spelling.) It's a sub $20 neck knife that wasn't bad at all. It is small so I used the included paracord to make a lanyard for it so I could carry it more comfortably. I wouldn't use it to hack my way through a jungle, but it handle everything I threw at it from an urban perspective. I really like how small but handy this fixie was. I would have no issue EDCing this one.
The one thing I didn't like was the clip. It's too flimsy for my liking, but I have a different one on the way. The sheath needed a bit of an adjustment from a hair dryer but it was fine after that.
Next I carried the Huaao Camping knife, made out of 8Cr13Mov steel with G10 handles. This knife had more heft which I appreciated and felt like it could take more punishment than the Tonife Runer. I really like the way it felt in my hand with the thickness and the heft. Even though it's a sub $30 knife, it made me feel that it could skin a deer then baton some wood without missing a beat.
The one thing I didn't like about it was the sheath and the clip. The sheath felt like it was too large for the size of the knife and the clip was too long. Depending on the way I sat, either the sheath or the clip would dig into me. I'm thinking of trying to 3D print a smaller sheath for it just to see how the carry would feel.
The last fixie I carried was the SOG Instinct that I picked up from the Surprise GAW box. The Instinct is a sub $40 knife made of 5CR15MOV steel with G10 handles. This one feels like the best of both worlds, small and light, yet tough enough to handle almost anything.
The one thing I don't like is, because of the way the clip screws into the sheath, my belt gets scratched when I put it on my belt or take it off. I'm thinking I need to try a flatter screw or something of better quality, not completely sure yet. I also don't care for the flat handle so I may either wrap it in paracord, or 3D print some scales for it just for smiles and grins.
Thanks to BPRoberts for hosting this fun challenge. Because of this challenge, I'll be carrying a fixie more often. See ya'll on another challenge soon!

-
Day 31
It's now time for my thoughts on the knives used in this challenge. Somehow I don't think they would have wavered if I'd carried one for the entire 30 days, rather than three for ten days each.
The CRKT Civet is, in my opinion, the only one of the three suited for neck carry. And its sheath pretty well restricts you to that method unless modified. The blade has a nice profile, and I appreciate the two sections of jimping. But I prefer a four-finger grip on a fixed blade, and I'm not overly fond of the supplied scales, Those may be removed one day. Still, if you want a fixed blade that carries unobtrusively, you could do a lot worse than the Civet.
The Garberg is the first fixed blade I can recall purchasing. There are a few things about it that I'm not overly fond of: the floppy belt loop on the sheath, the lack of jimping on the spine, the overmolded handle, and the tiny lanyard hole. But the blade is what really counts. And the Garberg has a great blade. I can only imagine that a Garberg with a carbon steel blade would be amazing. I think I'm going to keep the Garberg around and maybe see about adding some jimping and a different handle.
The only strike I have against the Izula II is the coated blade. Maybe I'll file off a section of the coating to help with ferro rod striking. Other than the coating, this is the best fixed blade I've tried. I appreciate the removable scales and overall solid construction. As I've said before, it's a small fixed blade that has a big knife feel. And it turns out that I like the carabiner/split ring carry method. This one has worked its way up to regular at-home carry. It'll be a regular carrier after I've moved...I don't see Michigan un-smurfing their awkwardly worded statutes concerning fixed blades in the next 10.5 months.
I won't be requesting the badge this time around, but I'll repeat this challenge next time the gauntlet is thrown down. Hope to have y'awl join in for the next one!

[attach id=0 msg=2550385]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



