December 2025 Tool Box Challenge
-
How far do you have to carry these tools for them to count? I have some upcoming workshop stuff in December which could be a good match, but lots of those tools would hardly be considered EDC. More like carriable, and then not too far..
-
It is not necessarily about carrying the tools, it is about going COLD TURKEY AND NOT CARRYING A MultiTool or Swiss Army Knife or a Multi-Functional Flat Tool
What we may select as if these items are not in our tool set.
A pliers, screw driver, pocket knife. As basics. Or, just a pocket knife.
-
Let me ask friend Vidar a question. What do you carry with you during your everyday life? I'm not interested in your workshop tools. Best wishes. Gary

-
Normally not much or a pocket SAK. A SAK or plier based multitool if doing relevant work. Some work clothes are preloaded. :)
Well, I guess that what was the answer. My tool box is pretty full, but those are definitely workshop tools for the most part.
-
It might be helpful to read a few pages of the posts from the last time this challenge was held. That would be a good way to get a feel for what it is all about. Best wishes. Gary
/post/2284896 -
Yes, those seem to be EDC sized tools. I just got confused about where to draw the line with the Tool Box heading, but the old thread made that a lot clearer.
-
@IMR4198 said:
Our friend Looper wanted me to show a photo of a Chapman screwdriver, I think? Maybe it was a Coleman sleeping bag.
@fullbreakfast said:
I am thinking of carrying this little chap:Please do!
Is there an NSN on the other side? -
I got out a pry bar yesterday. The only one I ever had, except for really big ones for prying apart parts of a building or something. A friend here sent me one for Christmas along with some other things. I said thank you for the various items and for the chisel. I was informed that it wasn't a chisel, it was a mini pry bar. Oops.
I VERY rarely pry anything. I sometimes use a screwdriver for something like that. Evidently I am in the minority judging from the number of bent knife blades and tools I see on used SAKs. I might carry my cute littlechipry bar during the challenge. It doesn't take up much room in a pocket. Best wishes. G

-
I know GARY has done a great job preparing us for this challenge.
As I have shared, having specialized tool kits has been my style since I started working in the electronics field service industry, 1973.
Today I visited the back of my pickup and retrieved a kit stored in my Stanley rolling tool locker.
[attach id=0 msg=2553215]
This kit was assembled about 1979, was lighter that a briefcase style grip, was used for repairing train printers, vertical tape stands, disc packs, and installations mainframe systems that filled a 40’ x 60’ computer room.
The only tool missing is my FLUKE multimeter, it is on loan to my son.I was actually searching for one of my small screwdrivers, but not there.
This was last used a few years ago at the PT gig at the Y, requiring and changing a display panel on the control panel for the lighting system that talked to the power control station in the electrical room.

-
I'm pretty sure I saw a small screwdriver in there somewhere? I sifted around in my own screwdriver box and found a pretty good small one myself. Didn't know I had it.
My local Walmart installed those scanners that you pass between when you go in or out. That was a number of years ago after the new location was opened up near my house. I figured out I would do a little test on those things. I put a full-sized vise grip in a coat pocket. Pretty hefty piece of steel. Certainly enough to simulate a weapon of some sort. Walked right in. Nothing. Looked at some things in the store and attempted to walk back out. What happened? Nothing. Naturally I was prepared to defend walking around with a large pair of locking pliers with some sort of excuse.
Whatever those scanners were supposed to check for, that wasn't it. Do people bring their dogs in the Walmart stores where you folks live? They sure do where I am. I saw two dogs during my last hasty visit. I asked my sister, and she said that she had never seen a dog in the store where she lives. These two were on leashes. Sometimes they put them in the shopping carts. I saw one older woman with a small dog in the kiddie seat of a shopping cart wrapped in a blanket. Leaving a trail of dog urine behind her on the floor. Lovely.
Best wishes. Gary

-
@LoopCutter said:
I know GARY has done a great job preparing us for this challenge.As I have shared, having specialized tool kits has been my style since I started working in the electronics field service industry, 1973.
Today I visited the back of my pickup and retrieved a kit stored in my Stanley rolling tool locker.
[attach id=0 msg=2553215]
This kit was assembled about 1979, was lighter that a briefcase style grip, was used for repairing train printers, vertical tape stands, disc packs, and installations mainframe systems that filled a 40’ x 60’ computer room.
The only tool missing is my FLUKE multimeter, it is on loan to my son.I was actually searching for one of my small screwdrivers, but not there.
This was last used a few years ago at the PT gig at the Y, requiring and changing a display panel on the control panel for the lighting system that talked to the power control station in the electrical room.
This is great. The experience that must have gone into building it up is obvious, and makes it so much cooler than any pre-packaged tool kit ever would be. Respect!
-
@Gary - Yes, the orange/black handle is a screw driver, just not the one I was searching. I wanted one of mine that has both flat blade and Phillips.
Also, the sensors you observed at your Walmart and other stores were not configured for metal detection, though they can be and are used at schools, hospitals, government buildings and even airports.
At retail stores they are configured to sense a RFID tag that is placed into packages, or price tags, even clam shells packages. Often items valued above $8 retail.
RFID = Radio Frequency Identification. These broadcast a signal, if close to a sensor an alarm will go off.
When you scan your purchase, that RFID tag is disabled or turned off. If the internal battery is exhausted, the tag is of no value, however I am not aware of the battery life cycle. It was suspected a year or more!@fullbreakfast - it did take some time to refine and tune the kit. It also was always evolving depending on new equipment, types of fasterner heads,
Most of the drivers are based off the excelite interchangeable driver bits and size of handles I was comfortable using.
-
I'm in.
- AzteCypher
- IMR4198
- ReamerPunch
- Farmer X
- cody6268
-
And welcome, friend cody. This might be the latest list. I don't know. Best wishes. G
- AzteCypher
- IMR4198
- ReamerPunch
- Farmer X
- fullbreakfast
- nate j
- LoopCutter
- Humayd
- Gra_farmer
- cody6268
-
In addition to my actual Cobras+ Pliers Wrench and their backup Kobalt clones (and a myriad of small bit drivers), I WILL be buying the Workpro clone before Dec.
Also, while pricey, there are a few 4 and 5-inch Snap-On pliers I really like. I can afford only one this month if I just so happen to run into the Snap-On guy. Three routes (I've seen three different trucks with three different guys' names on the side) kind of converge in the four-town SWVA/Southern WV area I do most of my day-to-day stuff in. I don't think the shop nearest me gets Snap-On anymore, but a business owned by one of my neighbors does (thus, I'll see if he can put the order in for me--or at least give me his guy's number). Also, a shop started by a family friend in a building my Granddad used to work in gets it as well.
HJ44BCF "Flank Jaw" Slip-Joint Pliers.
These will likely finally replace the old Duluth Handi-Boy pliers I've had for ages (that Knipex Pliers Wrenches couldn't replace...) In addition to having their agressive grip on the teeth (and a wire cutter), it has a portion designed to serve as a wrench that "will not round bolts". It handles up to 9/16, which means it can handle gate hinge work. 6" may be better, but too bulky for pocket carry.
[attach id=0 msg=2553263]
LN44BCF, a rather fine needlenose.
[attach id=1 msg=2553263]


-
@LoopCutter said:
Also, the sensors you observed at your Walmart and other stores were not configured for metal detection, though they can be and are used at schools, hospitals, government buildings and even airports.At retail stores they are configured to sense a RFID tag that is placed into packages, or price tags, even clam shells packages. Often items valued above $8 retail.
RFID = Radio Frequency Identification. These broadcast a signal, if close to a sensor an alarm will go off.
When you scan your purchase, that RFID tag is disabled or turned off. If the internal battery is exhausted, the tag is of no value, however I am not aware of the battery life cycle. It was suspected a year or more!I suspect most of the RFID tags used in stores are the passive type, meaning they are powered by a signal from the reader and don’t have their own battery.
-
I found the 2 screwdrivers I was searching for!
Concept is two carry items in this pouch,
Mini pipe wrench for plier needs, added a color complimenting short lanyard for pouch extraction.
And adding a Wuben G5
I plan to move the pouch from carry bag or coat pocket to another as needed.
Presently I have items already in pockets or on the counter.
Plus a traditional pocketknife will also be pocket carried as I currently do, but just one not two or three.

-
Nice photo. That should give some folks a good idea of where to go with this thing. I think our friend Vidar said something about not carrying much, maybe just a SAK. That makes sense when you have all your work tools already organized and probably permanently located in your workplace. Not something he carries with him at all. Tools are for work, the SAK is for daily carry.
A SAK is a pretty good knife. Okay screwdriver maybe. Depending on the screws. Awl. Something to open a bottle or can. Maybe scissors. None of these things are really primary use tools. I think it is safe to say our friend LoopCutter will dig up a great knife to carry. He already has some good screwdrivers in his dedicated pouch. If he needs scissors or something to open food or drink containers, that will be easy to add. Maybe he doesn't need that sort of thing? He has a good flashlight. First class pliers.
Your EDC Toolbox carry may not look like his. Might need a Zippo or a Bic disposable. Might just carry a knife. Nothing in the rules to forbid carrying two or three knives. Minimal carry, or all out. You get to decide. Just no multis. Find your needs have changed after a day or two of carry? Change it up. Best wishes. Gary
:D -
Changing it up and showing different items will be part of the fun. The fun starts in nine days!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login