* Supertool Saturday *
-
I discovered that micro or nano cord (3/64" and 1/32," respectively) would work well for these little Opinels. 95 cord is a little too big unless you melt one of the ends just right. -
Happy STS


-
Happy SUPERTOOL Saturday
Winter prep, storm to arrive at 2PM in my neighborhood, actual snow started after 10AM
I was behind on preps. Rose early to convert my garage from lawn mode to snow mode, but lawn mower into its corner, folded down handle, drained gas, and placed where the snow blower sat all summer.
Then prepped the blower, gas, choke, prime and pulled, first pull came to life. Then put everything away in the seasonal place.
The ST300 was used to loosen handle screws, removed tire air valve caps.
Then moved attention to AWD SUV, insure tires are all inflated now that temperatures are below freezing, 34PSI. It is important that on a AWD, tires are identical, and on mine there are PSI sensors that report each tires PSI to the traction control system.
Picture is the ST3, assisting my numb fingered with valve cap removals as I went from tire to tire with the portable pump.
[attach id=0 msg=2554297]
Last Saturday I will share in 2025, committed to the Toolbox Challenge. No MTs to be utilized.

-
Nice ones Adam and Gordon

Locks Up !
.jpg)
-
The entire SuperTool range was covered today. Great work, y'awl!

I found a loose drawer pull on the dresser. Blackie handled it with no issues.
[attach id=0 msg=2554350]
The dresser drawer was empty at the time because today was a laundry day.
[attach id=1 msg=2554350]
.jpg)
.jpg)
-
I am sure you will find that Blackie will handle most anything you throw at it

-
Yes indeed. The loose drawer pull was cake.
-
Awesome STS pics, guys

-
Happy STS everyone
[attach id=0 msg=2555183]

-
Thanks Antii and you too !

-
Great OG ST action for today!

-
2! -
-
Great STS pics Antti, Steve and Jones

-
Happy STS !

-
😱. So chilling!

-
I'm betting an OG ST with a cap crimper and no black oxide is a little uncommon.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

