December 2025 Tool Box Challenge
-
Day 6:
Cleanup on some 3D prints with the Stanley England 10-598
I really need to go on Amazon and get a knife that takes scalpel blades. I prefer this one to utility knives due to the ergonomics, but blades are $5 each (thus I sharpen them) at the feed store (only one carrying either the 10-049 or 10-598). I think this one (unlike its American cousin) can take Swann-Martin marking knife blades, which are a little cheaper.
[attach id=0 msg=2555232]
I did the hydraulic spreader's parts via AMS on one plate instead of multiple plates with different colors (partly why I didn't do it when I had the Adventurer 5M--no multicolor system) since it could just print overnight and I'd assemble it in the morning instead of having to set up and wait for plate after plate to cool.
Yep, that's a lot of waste in the bin...It was actually overflowing....
[attach id=1 msg=2555232]


-
Great work awl, looks like a fun challenge, I’d have been in but travelling overseas for Christmas so would have missed 10 days
Here’s a few OPT’s in my collection

-
<u>Day 6</u>
Finally had time to use the Opinel No 9 to cut into the GAW Surprise Box to see what goodies lie within.
-
Day 7

-
Day 5:
I keep these in my bathroom for removing unwanted hairs that grow from my ears.

-
Day 6:
I felt fancy.

-
@IMR4198 said:
I had a weird funky dream last night about myself and one of the challenge members. That's weird since I don't really know anybody personally. It was so intense and lasted so long, I figured I would tell it. Then when I woke up for the last time and my feet touched the floor it tripped my reset button and I forgot the whole mess.
I remember who it was about. That's about it. I also remembered something that I'm not sure I dreamed or if it was something I saw here. I thought I saw a TL-29 of some sort in this dream, or whatever it was. Just to be clear about it, the TL-29 is considered a multi-tool and strictly a no-no.
Back out of dreamville and into harsh reality. I shouldn't have wondered if anyone would think I was making the FFA business up. I do tell so many fibrications on here. I wonder if our friend WECSOG still has his old Ag jacket? There were a set of iron stakes behind the shop and a set of iron horseshoes. You were liable to hear the clangs almost any time of day. I might have to find some photos of the operation.
Best wishes,
G

I had a weird tool-related dream too. I was in a place near my home, but it was a combination of a couple of places, and it was like a pool drained of all water (no water there in real life), and at the bottom were ratchets and stationary, and I was sorting through them, organising them in rows,seeing what I'd keep and what was junk, testing to see if the ratchets and staplers worked, etc. And then I woke up and lost everything.

-
-
@ReamerPunch said:
What an excellent assortment of tools!
Thanks RP


-
Day 7
I have been switching around my SAK replacing single use tools. Almost every day. Sometimes a couple of times within one day. Carry one a while. Try something else. I think I have carried four different knives so far? Let's see.... Opinel, Buck trapper, Ruff Rida canoe, Svord. That might be all. All pass muster. The Svord is less pocket friendly than the others. Several different screwdrivers. The small ones are pokey. Have to watch they don't make a hole in something as you carry. The one stubby driver wasn't so bad in that way, but was bulky. My one and only mini pry bar made its appearance in this photo. No point in owning it if I don't carry it some, right? We will see how that goes. All this gives me an idea......Best wishes. G

[attach id=0 msg=2555256]
-
MINI POLL DEC 10
Yes, this is new. It won't be in traditional poll format with the box to check at the top of a page. By the 10th, everyone will have been carrying single use tools (and no multis) for over a week. Make your usual post and photo on Dec 10. Then add your answer to the poll. The poll question will be: What tools have you been using most frequently? State number one most used and second or third place if you wish. Like below.
My most used tool has been:-
Mini pry bar
-
Flashlight
Just post the list. Take a photo if you want to. No poll photo required. This poll is just for the ones taking the Toolbox Challenge.
Best wishes, Gary (IMR)PS. It was good to see friend Echotech check in. He mentioned he wanted to join in, but was traveling. Cheerleading from the sidelines is always welcome.
-
-
Day 7
Sunday carry: KC Coal Miner (jr soddy).

-
@King_Gorilla said:
Day 5:I keep these in my bathroom for removing unwanted hairs that grow from my ears.
LOL, understand fully.
I always hate when I cut myself shaving! It takes so long for my ear to stop bleeding ☺️
-
Day 7
Somehow caught a splinter on the outside edge of my right palm! 🫣
Could not back it out, the darn thing felt like it was an inch long and burned. Treated wood?
The Clip point of the Stockman tried to follow and create a pathway to the piece. Then the Tweezers, real tweezers, I overlooked needing this month were located in a Lego kit.
The thin tips followed the path under the skin created by the Stockman, located the object, tell when connected by the shooting pain.
Squeezed and wiggled it back out to the surface, then blood was pushing it out too!
I briefly saw the splinter, awl 1/8” of it, then lost it when a tissue soaked up the blood.
No more pain, applied antibiotic and bandaid. 10 minutes later awl pain was gone, bleeding stop.
And a splinter that small? Thought was a couple inches, pain shoot right past my wrist

Imagination

Picture
[attach id=0 msg=2555287]
-
Day 7
Screwdriving kit in action, as a cabinet I built needed to be attached to the wall. Because of the size and location of the cabinet, I had to put a bracket inside it rather than on top.

Bit of manual drilling:

Not being able to use the awl on my Pioneer is an annoyance when putting screws into wood / MDF. I have not found anything equally as good for making starter holes. It was missed today.
-
@LoopCutter said:
Day 7Somehow caught a splinter on the outside edge of my right palm! 🫣
Could not back it out, the darn thing felt like it was an inch long and burned. Treated wood?
The Clip point of the Stockman tried to follow and create a pathway to the piece. Then the Tweezers, real tweezers, I overlooked needing this month were located in a Lego kit.
The thin tips followed the path under the skin created by the Stockman, located the object, tell when connected by the shooting pain.
Picture
[attach id=0 msg=2555287]If this had been the Spartan challenge, I bet you would have whipped that out and used the small blade and tweezers. The Victorinox tweezers are handy. Not perfect, but often the tool you have on you is adequate. At home, I generally wind up using nail clippers. Two young men stopped by yesterday morning to chat. One had poked a deer and had it run off. I heard the shot in the distance earlier. Friendly. I told them to go find their deer if they could. I don't know if they were successful. If I see vultures flying around in a couple of days, then I will know. I should have asked if they were carrying multi-tools of any sort. Naturally, I would have explained that wasn't permitted on the premises for this month. I'm sure they would have understood.Best wishes. G
PS I ended up carrying an Opinel and leaving all my pliers, etc at home. Had to buy groceries. Grocer didn't have batteries on sale. That ship might have sailed for good. G

-
Apologies for the late start,an old injury reminded me it's around,i started moving around today.
If i may,I'd like to catch up over the course of the challenge,so here's...
Day 1
My EDC pen is usually a tactical pen [Timberline LCP] so I switched out.
My mother passed away a few months back,and my pen [or,one of my pens] for this challenge was hers.
I always bugged my mother for her pens,i remember this one,but thought that it was too nice to nag her for.
[attach id=0 msg=2555299].jpg)
-
Several members had to start late. Don't worry about it. Read some of the posts and catch up as you can. Welcome aboard. Best wishes. Gary

-
Thanks Gary

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
