December 2025 Tool Box Challenge
-
Day 6:
I felt fancy.

-
@IMR4198 said:
I had a weird funky dream last night about myself and one of the challenge members. That's weird since I don't really know anybody personally. It was so intense and lasted so long, I figured I would tell it. Then when I woke up for the last time and my feet touched the floor it tripped my reset button and I forgot the whole mess.
I remember who it was about. That's about it. I also remembered something that I'm not sure I dreamed or if it was something I saw here. I thought I saw a TL-29 of some sort in this dream, or whatever it was. Just to be clear about it, the TL-29 is considered a multi-tool and strictly a no-no.
Back out of dreamville and into harsh reality. I shouldn't have wondered if anyone would think I was making the FFA business up. I do tell so many fibrications on here. I wonder if our friend WECSOG still has his old Ag jacket? There were a set of iron stakes behind the shop and a set of iron horseshoes. You were liable to hear the clangs almost any time of day. I might have to find some photos of the operation.
Best wishes,
G

I had a weird tool-related dream too. I was in a place near my home, but it was a combination of a couple of places, and it was like a pool drained of all water (no water there in real life), and at the bottom were ratchets and stationary, and I was sorting through them, organising them in rows,seeing what I'd keep and what was junk, testing to see if the ratchets and staplers worked, etc. And then I woke up and lost everything.

-
-
@ReamerPunch said:
What an excellent assortment of tools!
Thanks RP


-
Day 7
I have been switching around my SAK replacing single use tools. Almost every day. Sometimes a couple of times within one day. Carry one a while. Try something else. I think I have carried four different knives so far? Let's see.... Opinel, Buck trapper, Ruff Rida canoe, Svord. That might be all. All pass muster. The Svord is less pocket friendly than the others. Several different screwdrivers. The small ones are pokey. Have to watch they don't make a hole in something as you carry. The one stubby driver wasn't so bad in that way, but was bulky. My one and only mini pry bar made its appearance in this photo. No point in owning it if I don't carry it some, right? We will see how that goes. All this gives me an idea......Best wishes. G

[attach id=0 msg=2555256]
-
MINI POLL DEC 10
Yes, this is new. It won't be in traditional poll format with the box to check at the top of a page. By the 10th, everyone will have been carrying single use tools (and no multis) for over a week. Make your usual post and photo on Dec 10. Then add your answer to the poll. The poll question will be: What tools have you been using most frequently? State number one most used and second or third place if you wish. Like below.
My most used tool has been:-
Mini pry bar
-
Flashlight
Just post the list. Take a photo if you want to. No poll photo required. This poll is just for the ones taking the Toolbox Challenge.
Best wishes, Gary (IMR)PS. It was good to see friend Echotech check in. He mentioned he wanted to join in, but was traveling. Cheerleading from the sidelines is always welcome.
-
-
Day 7
Sunday carry: KC Coal Miner (jr soddy).

-
@King_Gorilla said:
Day 5:I keep these in my bathroom for removing unwanted hairs that grow from my ears.
LOL, understand fully.
I always hate when I cut myself shaving! It takes so long for my ear to stop bleeding ☺️
-
Day 7
Somehow caught a splinter on the outside edge of my right palm! 🫣
Could not back it out, the darn thing felt like it was an inch long and burned. Treated wood?
The Clip point of the Stockman tried to follow and create a pathway to the piece. Then the Tweezers, real tweezers, I overlooked needing this month were located in a Lego kit.
The thin tips followed the path under the skin created by the Stockman, located the object, tell when connected by the shooting pain.
Squeezed and wiggled it back out to the surface, then blood was pushing it out too!
I briefly saw the splinter, awl 1/8” of it, then lost it when a tissue soaked up the blood.
No more pain, applied antibiotic and bandaid. 10 minutes later awl pain was gone, bleeding stop.
And a splinter that small? Thought was a couple inches, pain shoot right past my wrist

Imagination

Picture
[attach id=0 msg=2555287]
-
Day 7
Screwdriving kit in action, as a cabinet I built needed to be attached to the wall. Because of the size and location of the cabinet, I had to put a bracket inside it rather than on top.

Bit of manual drilling:

Not being able to use the awl on my Pioneer is an annoyance when putting screws into wood / MDF. I have not found anything equally as good for making starter holes. It was missed today.
-
@LoopCutter said:
Day 7Somehow caught a splinter on the outside edge of my right palm! 🫣
Could not back it out, the darn thing felt like it was an inch long and burned. Treated wood?
The Clip point of the Stockman tried to follow and create a pathway to the piece. Then the Tweezers, real tweezers, I overlooked needing this month were located in a Lego kit.
The thin tips followed the path under the skin created by the Stockman, located the object, tell when connected by the shooting pain.
Picture
[attach id=0 msg=2555287]If this had been the Spartan challenge, I bet you would have whipped that out and used the small blade and tweezers. The Victorinox tweezers are handy. Not perfect, but often the tool you have on you is adequate. At home, I generally wind up using nail clippers. Two young men stopped by yesterday morning to chat. One had poked a deer and had it run off. I heard the shot in the distance earlier. Friendly. I told them to go find their deer if they could. I don't know if they were successful. If I see vultures flying around in a couple of days, then I will know. I should have asked if they were carrying multi-tools of any sort. Naturally, I would have explained that wasn't permitted on the premises for this month. I'm sure they would have understood.Best wishes. G
PS I ended up carrying an Opinel and leaving all my pliers, etc at home. Had to buy groceries. Grocer didn't have batteries on sale. That ship might have sailed for good. G

-
Apologies for the late start,an old injury reminded me it's around,i started moving around today.
If i may,I'd like to catch up over the course of the challenge,so here's...
Day 1
My EDC pen is usually a tactical pen [Timberline LCP] so I switched out.
My mother passed away a few months back,and my pen [or,one of my pens] for this challenge was hers.
I always bugged my mother for her pens,i remember this one,but thought that it was too nice to nag her for.
[attach id=0 msg=2555299].jpg)
-
Several members had to start late. Don't worry about it. Read some of the posts and catch up as you can. Welcome aboard. Best wishes. Gary

-
Thanks Gary

-
Day 7
Management
required a white bucket that she bought to use as a stand for a small Christmas tree to cut down to the proper height. Straight to work I went :ahhhI used a tape measure and a Sharpie to mark around the bucket. Then I applied painter's tape around the bucket at the marks to create a straight line. Finally, I drilled a starter hole and cut around the bucket along the edge of the tape to produce a stand of the correct height


-
@Adam5 said:
I turned to the Knipex to liberate the cap from a bottle of beer:Begging an obvious question: was that a twist-off or a pop-off? I've never heard of Landshark, so I'll look them up.

@King_Gorilla said:
I felt fancy.Balisongs are undeniably cool, but I'm glad I didn't fall into that rabbit hole.
@fullbreakfast said:
Not being able to use the awl on my Pioneer is an annoyance when putting screws into wood / MDF. I have not found anything equally as good for making starter holes.
@Humayd A R Mahomedy said:
If i may,I'd like to catch up over the course of the challenge...Always good to see you in a challenge!

Day 7
As today is the 84th anniversary of the destruction at Pearl Harbor, I thought it was appropriate to show something with a patriotic theme. So I grabbed the Olight i1R2-EOS, which is on a red, white, and blue lanyard.
[attach id=0 msg=2555326]
Never forget.

[attach id=1 msg=2555326]
.jpg)
.jpg)
-
My high school pal Ben's father was at Pearl during the attack. On board the USS Turkey which was an old minesweeper. The old man told me the ship went back and forth in the harbor during the attack firing the few popguns they had on board. I think the ships of that class got bird names. A name like the USS Turkey probably got some laughs in the bars.
Best wishes, G
:)
[attach id=0 msg=2555329]
-
DAY 7
Forgot to state, that I have been to some really seedy hotels before and water purification tablets and a mosquito headnet were a must, plus a sleeping bag liner (later not pictured)
We went to see River Dance - Lord of the dance dangerous games back in 2014, it was brilliant.
The 30th anniversary version we saw....to be honest it was a confusing and disappointing, for those that don't know or heard of River Dance here is a link to understand...
https://youtu.be/DLEo9SStDPI?si=cFHqVRWJwfYxm9Pn
The one I watched 2014 and all the versions previous years ago were brilliant....new generation has messed it up
-
Day 7
Case Marilla on cigar duty. This version features black anodized aluminum handles with G10 insert, and is somewhat uncommon due to CPM 20CV blade steel (S35VN is the usual for this model).
Action is excellent. It OHOs quickly and easily with the flipper tab (which also serves as a guard when the blade is open), and is easy and comfortable to OHC as well. In addition, reliance on the flipper keeps the blade clean of thumb studs, holes, etc.
Weight is , and the blade length of makes it adequate for all but the most challenging tasks.
Lockup is solid, with no discernible play in any direction.
The blade shape, while perhaps a bit unusual for a pocket knife, is very functional, offering both good belly and an acute but strong tip. Its wedge-like shape makes it perhaps the best knife I have for cutting zip ties (which can sometimes be a challenge depending on the configuration and tightness of the zip tie and shape of the blade). In fact, I did end up cutting a couple zip ties with the Marilla later in the day.
I only have two complaints…
One is that the two screws used to attach the pocket clip have domed heads that sit proud of the clip, and can snag on the edge of a pocket when attempting to draw or replace the knife. Screws with flat heads should have been used in countersunk holes, so they sat flush with the clip. This seems like such a rookie mistake, and also a problem that should have been obvious during prototype testing (if not before), especially considering the care that obviously went into some aspects of the design.
Two, I’m not really a fan of the G10 insert. I don’t hate the idea of a little more traction on the handle, as the smooth aluminum can be slick, especially when wet. But the G10 adds another piece and two screws that didn’t have to be there. It sits a bit proud of the rest of the handle. The texturing is too aggressive, and it only provides traction in that one spot. A much better solution would have been some light texturing of the aluminum itself, as found on many flashlights.
While Case is obviously best known for their traditional knives, this foray into modern folders is worth a look. And, though more expensive than some Chinese-made offerings, the price is actually pretty reasonable vs. other US-made competitors.

-
Day 7:
A little bit of a whoopsie. I tend to not go anywhere (except where prohibited by law) without a knife. 99% of a time, that knife blade is on my multitool or Swiss Army. This time I had my pliers and mini pry tool, BUT NO KNIFE!!!
That being said, I used it as an excuse to get a new version of Walmart's Bugout ripoff--the Glacier.
The orange ones with D2 blades are awful. Really bad fit and finish, improper heat treat, and heavier than they need to be. The cheaper ones (used to be $5, now $7 or $8) were better. They were designed closer to the Bugout, had partial liners (thus lighter), and great fit and finish. Plus, they're a really nice knife for pocket change. You can't buy a burger for what these cost anymore.
I was about to get a white one (even though I had a couple spares)--then I noticed a much nicer color (along with a great fixed blade--which I'll get next week) in the Christmas cheapie bin (unfortunately, no good SAK-alikes like 2-3 years back) for $7. Walmart says green, I say gray. In the right light, it's slightly green. Kind of like the OD Green plastic buckles on some military surplus packs--but more muted.
They've upgraded both the white ones (which are now a standard Walmart knife) and these gray ones to have a stronger clip as well as screw holds for LH carry (which I will change)
I'm thinking I'll get rid of my old spares as Christmas gifts (which they were leftover from last year's gift knives I bought) and replace them with the gray Glaciers. I'm gonna try seeing if the clip fits on my Bond as well. Screws look close...
[attach id=0 msg=2555355]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
