December 2025 Tool Box Challenge
-
@fullbreakfast said:
I was trying to work sealant into some small gaps today, and something like that would have come in handy. The spreader I have was too big to fit where I was working, and I had to make a shim out of a plastic bottle.I hadn't considered that, but it would be just right for spreading sealant, putty, and such in small gaps. My usual paracord supplier doesn't show it anymore, and a second supplier didn't show it, either, I'll do some Googling later today and see if I can find it.
Edit: by the way, the next mini-challenge host has been selected. Your next mini-challenge should be announced by the middle of next week.
-
Day 9

-
@IMR4198 said:
I always heard the way to handle that was to let one child choose where to divide the goods. Then the other gets first choice of the split. My sister was the absolute worst to want to divide things. As if one molecule more would make any difference.It is a good approach in theory, but if one of the kids in question is my son (just turned six) it can break down in several ways. Argument over who chooses where to cut, complaints that I cut in the wrong place, potential for him to choose where to cut and then grab his preferred half anyway and run off. Etc. I find it easier to just cut and distribute without having a process involved.
Luckily my daughter who is three years older is usually more relaxed about who gets the "big half".
-
Day 9

I don't really think having things that are held together by means of a 2mm hex grub screw that just pressures a rod with no socket in it is a great idea. However I was not consulted prior to the purchase of these curtain holdbacks.
If I had the time and could have been bothered I could have drilled a hole in the rod and used a small self-tapping screw instead. But I didn't.
They will do the job I suppose. And they were 50% off, at least.
-
MINI POLL DEC 10
MINI CHALLENGE DEC 12Just reminders. List your most used tools during the ToolBox challenge for tomorrow's poll. No multis, of course. Only the most used tools so far this month. Remember the Friday mini challenge. Rules are in a previous post. Dan will choose the next mini challenge rule maker. That individual will make his own set of rules for Dec 19.Best wishes, G
:ahhh -
Day 9
Svord, locking pliers, 4 inch adjustable wrench. This could be the swan song for all three of these, as far as the challenge. The wrench will likely go back on my work bench. The locking pliers back in the plier box. Might carry the Svord again. Who knows? Might go minimal tomorrow.Best wishes, G
[attach id=0 msg=2555495]
-
@fullbreakfast said:
I find it easier to just cut and distribute without having a process involved.
I tell the kids, “You get what you get and you don’t throw a fit.”
-
<u>Day 8 - catch up</u>
Decided to throw this small set of pliers in my pocket as I knew I needed to get some 3D printing done for Christmas. I carried these Wilde pliers in my front pocket without issue. Anything much bigger than this would have to go in a back pocket or some sort of holster for me.
Used the stubby and the pliers to get the support material out of this 3D print.
-
Brings back memories!
With 6 in the household, 4 being teenagers and a wife/mother that had her specialties. Seldom if ever leftovers.
Second serving often was were squabbling occurred and being the first to get seconds had advantages.Meatloaf was one such event! The Youngest was wanting seconds but missed out as her sister got the last piece. I thought maybe some sisterly love would have let to sharing. But no! Then the teasing started.
My wife stopped it immediately, retrieving a second meatloaf from the oven, cutting serving a nice piece to the youngest. And proclaimed no the rest will be for sandwiches if you choose to carry your lunch.
Her kitchen talents and brainy solutions are truly missed. 🌹
-
Day 9
[attach id=0 msg=2555526]
Mostly paperwork sorting and filing on tap for today!
The opi will handle envelopes, the Barehead will be back up in the pocket and used when I move rooms and if needed.
Pliers in bag and pouch as well as other gear.

-

@IMR4198 said:
MINI POLL DEC 10
MINI CHALLENGE DEC 12Just reminders. List your most used tools during the ToolBox challenge for tomorrow's poll. No multis, of course. Only the most used tools so far this month. Remember the Friday mini challenge. Rules are in a previous post. Dan will choose the next mini challenge rule maker. That individual will make his own set of rules for Dec 19.Best wishes, G
:ahhhFor these purposes, do we consider a flashlight to be a tool? It’s one of the frequently used things I carry.
-
It's a tool. So long as it isn't attached to a multi tool or have other functions. We have had several flashlights in posts here this month already. Best wishes. G

-
Day 9
North American Arms cap and ball (black powder) .22 revolver. After I fire it, I need a pointy tool that will fit in the slots at the rear of the cylinder to flick out the percussion cap remnants. Until this month I have used the nail file on my Vic Classic.
I had to find a non-multi replacement. As it turns out, my Stanley 10-049 works perfectly.
Propping up the revolver is my Wurkkos TS10 copper flashlight.
-
Oops. Duplicate post.

-
Day 9
A bandana might not be the first thing that comes to mind when we talk about tools, but they are very handy and versatile.
I never leave the house without one (or sometimes two) in my pocket. I prefer brighter colors; better for emergency signaling if needed.

-
I wore a green bandana during Covid, because they wouldn't let me in the store otherwise. I came down the aisle and an old dude in a wheelchair raised both his hands in the air and tried to look scared. Like I was robbing a stagecoach in the old west. Funniest thing that happened that day. Best wishes. G

-
@fullbreakfast said:
I don't really think having things that are held together by means of a 2mm hex grub screw that just pressures a rod with no socket in it is a great idea.:iagree: About 20 years ago, I built a radio-controlled Tamiya Mini Cooper. That kit had at least one grub screw, but I don't recall exactly where it was.
@AzteCypher said:
Used the stubby and the pliers to get the support material out of this 3D print.It looks like Darth Vader. How close did I come?
@WECSOG said:
North American Arms cap and ball (black powder) .22 revolver.:like:
@nate j said:
A bandana might not be the first thing that comes to mind when we talk about tools, but they are very handy and versatile.And they fold down into next to nothing. I always have one in the back pocket of my Carhartts.
Another great day, y'awl! :2tu:
Day 9
Here's the last of my paracord tools: the Knotter's Tool.
[attach id=0 msg=2555565]
Obviously, it's a marlinspike. But the handle unscrews...
[attach id=1 msg=2555565]
And three fids (lacing needles) or other useful items can be stored in the hollow handle. Since removal of the fids makes it a single-function tool, and one can purchase it without the fids, I'm saying it doesn't run afoul of the no multi-function tools rule.
[attach id=2 msg=2555565]
I also managed to find the smoothing tool:
Smoothing Tool
As seen in the videos, this tool is a must have when you are smoothing over melted ends. Simply melt the ends of paracord with a lighter, then use this smoothing tool in a circular rocking motion. The end result is an extremely smooth surface. Check out this video and fast forward to the 7 minute mark. You can see
BoredParacord.com (www.boredparacord.com)
My (mis)adventures with cooking spaghetti will have to be shared another time.
.jpg)
.jpg)
.jpg)
-
@Farmer X said:
Here's the last of my paracord tools: the Knotter's Tool.[attach id=0 msg=2555565]
Obviously, it's a marlinspike. But the handle unscrews...
[attach id=1 msg=2555565]
And three fids (lacing needles) or other useful items can be stored in the hollow handle. Since removal of the fids makes it a single-function tool, and one can purchase it without the fids, I'm saying it doesn't run afoul of the no multi-function tools rule.
Very nice. I am a sucker for tools that can store other tools inside them!
It looks a bit like something that an EDC vendor would sell for a fancy price as having “tactical” as well as practical use (i.e. you could stab someone in the head with it, if you really wanted to). Like these “tactical” pens that are sold - as if you couldn’t do the same with any metal pen.
How do you use the fids? They don’t seem to have an “eye” in them?
@Farmer X said:
I also managed to find the smoothing tool:Smoothing Tool
As seen in the videos, this tool is a must have when you are smoothing over melted ends. Simply melt the ends of paracord with a lighter, then use this smoothing tool in a circular rocking motion. The end result is an extremely smooth surface. Check out this video and fast forward to the 7 minute mark. You can see
BoredParacord.com (www.boredparacord.com)
Thanks for looking this out. I’m going to get one to keep in my tool bag, for the use we discussed.
Maybe I will get into working with paracord too! It seems like a fun hobby. And I have occasionally bought little things made of paracord, and thought it would be nicer to be able to make my own.
-
Day 10
scissors x4
knife x3
light x2
ratchet x1
hammer x1Also, omg it came! Blue Point BLPKSB004!


-
@Farmer X said:
It looks like Darth Vader. How close did I come?Winner, winner, chicken dinner!! It's a keep sake box that my daughter requested I 3D print for her big brother. Her present to him. The wife already wrapped it so I'll take a picture of it when he unwraps it at Christmas.
<u>Day 9</u>
I'm still having issues with my image hosting site but this one image seems to be working for now. Switched out to the Barlow to cut up some cheese. I gained a new appreciation when we did the Traditional Challenge.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


