December 2025 Tool Box Challenge
-
<u>Day 8 - catch up</u>
Decided to throw this small set of pliers in my pocket as I knew I needed to get some 3D printing done for Christmas. I carried these Wilde pliers in my front pocket without issue. Anything much bigger than this would have to go in a back pocket or some sort of holster for me.
Used the stubby and the pliers to get the support material out of this 3D print.
-
Brings back memories!
With 6 in the household, 4 being teenagers and a wife/mother that had her specialties. Seldom if ever leftovers.
Second serving often was were squabbling occurred and being the first to get seconds had advantages.Meatloaf was one such event! The Youngest was wanting seconds but missed out as her sister got the last piece. I thought maybe some sisterly love would have let to sharing. But no! Then the teasing started.
My wife stopped it immediately, retrieving a second meatloaf from the oven, cutting serving a nice piece to the youngest. And proclaimed no the rest will be for sandwiches if you choose to carry your lunch.
Her kitchen talents and brainy solutions are truly missed. 🌹
-
Day 9
[attach id=0 msg=2555526]
Mostly paperwork sorting and filing on tap for today!
The opi will handle envelopes, the Barehead will be back up in the pocket and used when I move rooms and if needed.
Pliers in bag and pouch as well as other gear.

-

@IMR4198 said:
MINI POLL DEC 10
MINI CHALLENGE DEC 12Just reminders. List your most used tools during the ToolBox challenge for tomorrow's poll. No multis, of course. Only the most used tools so far this month. Remember the Friday mini challenge. Rules are in a previous post. Dan will choose the next mini challenge rule maker. That individual will make his own set of rules for Dec 19.Best wishes, G
:ahhhFor these purposes, do we consider a flashlight to be a tool? It’s one of the frequently used things I carry.
-
It's a tool. So long as it isn't attached to a multi tool or have other functions. We have had several flashlights in posts here this month already. Best wishes. G

-
Day 9
North American Arms cap and ball (black powder) .22 revolver. After I fire it, I need a pointy tool that will fit in the slots at the rear of the cylinder to flick out the percussion cap remnants. Until this month I have used the nail file on my Vic Classic.
I had to find a non-multi replacement. As it turns out, my Stanley 10-049 works perfectly.
Propping up the revolver is my Wurkkos TS10 copper flashlight.
-
Oops. Duplicate post.

-
Day 9
A bandana might not be the first thing that comes to mind when we talk about tools, but they are very handy and versatile.
I never leave the house without one (or sometimes two) in my pocket. I prefer brighter colors; better for emergency signaling if needed.

-
I wore a green bandana during Covid, because they wouldn't let me in the store otherwise. I came down the aisle and an old dude in a wheelchair raised both his hands in the air and tried to look scared. Like I was robbing a stagecoach in the old west. Funniest thing that happened that day. Best wishes. G

-
@fullbreakfast said:
I don't really think having things that are held together by means of a 2mm hex grub screw that just pressures a rod with no socket in it is a great idea.:iagree: About 20 years ago, I built a radio-controlled Tamiya Mini Cooper. That kit had at least one grub screw, but I don't recall exactly where it was.
@AzteCypher said:
Used the stubby and the pliers to get the support material out of this 3D print.It looks like Darth Vader. How close did I come?
@WECSOG said:
North American Arms cap and ball (black powder) .22 revolver.:like:
@nate j said:
A bandana might not be the first thing that comes to mind when we talk about tools, but they are very handy and versatile.And they fold down into next to nothing. I always have one in the back pocket of my Carhartts.
Another great day, y'awl! :2tu:
Day 9
Here's the last of my paracord tools: the Knotter's Tool.
[attach id=0 msg=2555565]
Obviously, it's a marlinspike. But the handle unscrews...
[attach id=1 msg=2555565]
And three fids (lacing needles) or other useful items can be stored in the hollow handle. Since removal of the fids makes it a single-function tool, and one can purchase it without the fids, I'm saying it doesn't run afoul of the no multi-function tools rule.
[attach id=2 msg=2555565]
I also managed to find the smoothing tool:
Smoothing Tool
As seen in the videos, this tool is a must have when you are smoothing over melted ends. Simply melt the ends of paracord with a lighter, then use this smoothing tool in a circular rocking motion. The end result is an extremely smooth surface. Check out this video and fast forward to the 7 minute mark. You can see
BoredParacord.com (www.boredparacord.com)
My (mis)adventures with cooking spaghetti will have to be shared another time.
.jpg)
.jpg)
.jpg)
-
@Farmer X said:
Here's the last of my paracord tools: the Knotter's Tool.[attach id=0 msg=2555565]
Obviously, it's a marlinspike. But the handle unscrews...
[attach id=1 msg=2555565]
And three fids (lacing needles) or other useful items can be stored in the hollow handle. Since removal of the fids makes it a single-function tool, and one can purchase it without the fids, I'm saying it doesn't run afoul of the no multi-function tools rule.
Very nice. I am a sucker for tools that can store other tools inside them!
It looks a bit like something that an EDC vendor would sell for a fancy price as having “tactical” as well as practical use (i.e. you could stab someone in the head with it, if you really wanted to). Like these “tactical” pens that are sold - as if you couldn’t do the same with any metal pen.
How do you use the fids? They don’t seem to have an “eye” in them?
@Farmer X said:
I also managed to find the smoothing tool:Smoothing Tool
As seen in the videos, this tool is a must have when you are smoothing over melted ends. Simply melt the ends of paracord with a lighter, then use this smoothing tool in a circular rocking motion. The end result is an extremely smooth surface. Check out this video and fast forward to the 7 minute mark. You can see
BoredParacord.com (www.boredparacord.com)
Thanks for looking this out. I’m going to get one to keep in my tool bag, for the use we discussed.
Maybe I will get into working with paracord too! It seems like a fun hobby. And I have occasionally bought little things made of paracord, and thought it would be nicer to be able to make my own.
-
Day 10
scissors x4
knife x3
light x2
ratchet x1
hammer x1Also, omg it came! Blue Point BLPKSB004!


-
@Farmer X said:
It looks like Darth Vader. How close did I come?Winner, winner, chicken dinner!! It's a keep sake box that my daughter requested I 3D print for her big brother. Her present to him. The wife already wrapped it so I'll take a picture of it when he unwraps it at Christmas.
<u>Day 9</u>
I'm still having issues with my image hosting site but this one image seems to be working for now. Switched out to the Barlow to cut up some cheese. I gained a new appreciation when we did the Traditional Challenge.
-
Day 10
Seasonal EDC shot:

-
Mini-poll:
- Utility knife
- Scissors
- Flashlight
Those top 3 are in a different division to the rest. All used many times every single day.
- Folding knife
My folding knife is used typically once or twice a day. I only use it for tasks where the utility blade or scissors are not better suited. For me that means it is mostly limited to the odd food prep task like peeling an apple, and opening mail. Jobs that need a longer blade, basically. Sparing the blade on my folding knife this way means less frequent sharpening. Which since the knife is almost always a SAK is a good thing.
- Pry bar
- Screwdrivers
- Pen
- Toothpick / tweezers
Items 5-8 will typically be used every day or two.
Then there are items I am carrying that I have not used at all this month, including my mini notebook, eyeglass screwdriver, Firefly ferro rod, needle and thread. These are arguably not worth the carry, but are generally so small and light that it is worth having them on the off chance that they will come in handy.
If I am honest, I don't really intend to use the needle and thread myself at all. It is there so that one day when my wife or one of the kids has a wardrobe malfunction whilst we are out, I can hand them to my wife and she will think I am awesome. Or more likely she will think I am a dork for carrying such things in my pocket, but a useful dork to have around. I'll take what I can get.
-
Day 10 Mini Poll Day
The annoying AI fiend that posts unwanted ads on my MTO page has decided to combine the come-ons. Formerly I would get an offer for pictures of Reba, or someone else well known. Then I would get females who were flaunting their HUGE size. Not body mass, but bust sizes. I think. Then it was gals who were body painting. Finally, it was photos I wouldn't believe of Country Girls. A cheesecake photo went with each offer. Since I didn't respond to any of them, the demon decided to combine them. Ole IMR will fall for this one. Oh boy. Now todays ad was for : Country Girls who body paint and flaunts their huge size in photos. Notice the flaunts, not flaunt. I won't click this one either. AI dark spirits can't spell. Did you ever see some click bait that says something about 'Kniveses'? I get that all the time. I think I will wait and see if I get an offer for photos from "Reba, age 70, a country girls who body paints and flaunt their huge sizes in photos with kniveses. "On to the mini poll:
- flashlight. Most used.
- nail file.
- knife blade
A knife might shoot all the way up to number 2 if I considered kitchen knives. Kniveses?
Day 10 photo. Going minimal. Best wishes. G
[attach id=0 msg=2555593]

-
@gra_farmer said:
Catch upDAY 8
A little titanium action, the box cutter and prybar are new additions...the Fenix E99Ti is a brilliant little torch, a gift from a friend, no longer with us
I have the same utility knife and pry bar - assuming that your utility knife is made by Aerocrafted - guessing yours was part of a special order, given "Resolute"? I find mine indispensable.
The pry bar is good too and I think it is the first one I ever got, many years ago. Very light and with good sharp ends capable of getting under things.
-
@fullbreakfast said:
I have the same utility knife and pry bar - assuming that your utility knife is made by Aerocrafted - guessing yours was part of a special order, given "Resolute"? I find mine indispensable.The pry bar is good too and I think it is the first one I ever got, many years ago. Very light and with good sharp ends capable of getting under things.
Yes it it. Agreed very useful. just to note for the challenge the pry bar, is used for just that, nothing else, I have been pulling staples from damp coursing at night
Anyway, repost for days 8 and 9
DAY 8
DAY 9
Now I often forget how much I use the humble tape measure, tweezers and pin
-
DAY 10 - mini challenge
My most used pocket tools, that are always on me, the scissors have been a good send for bottled water stations, as cannot bring a knife with me out into the public.
From top to bottom, the most used tools for this challenge in order...just to note I have a magnetic in the knipex that is loose in the mechanism that is used for retrieving keys, etc
-
I decided not to post this answer. Oh well. G
:ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login







