December 2025 Tool Box Challenge
-
Day 13
Had to tidy up tonight, party with friends is on the calendar and hopefully reachable as we are plunging into a deep freeze and it is now snowing.
Anywho, reached into my pouch and extracted the nail file to tidy up some rough edges before they snagged material and ripped back and become more troublesome.
The pouch
[attach id=0 msg=2555954]
And file
-
Day 12
The Klein permanent marker came in handy while cutting some OSB

-
Day 13
I used the Stanley 4-in-1 to help remove the door panel during the process of installing a new rear passenger window:

-
<u>Day 13</u>
Used a Rough Ryder Sowbelly that I picked up from the Surprise Box GAW. It cleaned up real nice and just needed a quick hone to be back in business.
Used it to cut open some go-go juice and some 3D filament for a Christmas present I'm working on.
-
Day 14

When I was a small boy - this was in the 1970s - every summer we would go on holiday in North Yorkshire, staying in a village called Glaisdale, and spending time on the coast at places like Runswick Bay, Staithes, Sands End, Robin Hoods Bay and Whitby. The cliffs and rocks on the beaches in these places are fossiliferous, and me and my dad spent hours hunting for fossils. They were happy days. He bought this hammer for splitting promising rocks with. I guess it would be around fifty years old now.
My dad died nine years ago. The hammer has been in my shed, rusting, for much longer than that. I knew right away I would want it for this mini-challenge. And I started to think about my dad when I hunted it out. We hadn't been what you would call close - he was not close to anybody in that way - but I knew that he loved me and was proud of me, even though those were things it would not have occurred to him to say. I felt the same way about him. When I saw all the rust on the hammer it kind of hit me that I don't really have very much to remember him by - he did not care at all about physical possessions - and maybe the hammer is the only thing surviving that represents time we spent together. Apart from that all I have is some of his books.
I'm going to clean up the hammer, and it's not going to go back in the shed. I will probably post some more pictures here when I get done with it.



Steel wool, a good soak in de-rusting solution, more steel wool and a few drops of 3-in-1 oil.



Looks good for another few decades.
My boy is six now, maybe next Summer we'll go looking for fossils.
-
That hammer looks amazing! Excellent job bringing it back to life.

-
Day 14
711L Mini ratchet. Lives on my keys with a double-ended bit.


-
Day 14
Buck, flashlight, and my patched together CASIO. I figured the band would fail and dump old faithful on the ground, but so far the watch band has held together. I might have to Opinel a while after this. We will see. Is Opinel a verb? It is now.I Opinel We Opinel
You Opinel You'all Opinel
He Opinels They Opinel
She Opinels
It Opinels
We won't use the archaic 'Thou Opinelst and 'Ye Opineleth'. Have to bring things up to date, right? If there are questions about other conjugations, I might or might not answer them. Depends.
Best wishes. G

[attach id=0 msg=2555989]
-
Day 14
Utica spear point folder
P-38 and P-51 rats openersThe P-38 is stamped "US Shelby Co" and the P-51 is just stamped "US."
I also have a larger, thicker commercial version by Marbles, but I can't show that one because it has a spork built in, which makes it a multi tool.

-
Day 14
Travel yesterday afternoon, through the snow and blowing cold temperatures to join mates for some CHRISTMAS CHEER and food and White Elephant gifting experience.
The HOSTESS, prepared a wide assortment of goodies,( I even got to bring some home!)
The HOST, set up bar service on top of the washer dryer in laundry room. His twist off craft beers were not twist off, and the Wine I brought had a cork in it and he could not located a cork removal tool to please the HOSTESS’s request to sample the contents!
Normally a SPARTAN, would have been in my kit, but I had at the last minute retrieved my substitutes for the travel adventure.
Then after the food some party games, that included a White Elephant gift exchange, trade, steal, and steal back and some pouting…
My final result was some excellent coffee table reading material.
[attach id=0 msg=2555999]
A shame we make ourselves wait a whole year to do again. (Unless we arrange a travel adventure before next holiday season!)
And, to conclude the evening I ventured home, on icey roads, snow covering black ice and single digit temps during the hour ‘n half trek, than normally takes a three quarters an hour for the 50 mile journey🫣
I did sleep in or was the later pillow time caused the petite interruption to adjust accordingly.

-
@fullbreakfast said:
Day 14
Steel wool, a good soak in de-rusting solution, more steel wool and a few drops of 3-in-1 oil.



Looks good for another few decades.
My boy is six now, maybe next Summer we'll go looking for fossils.
That cleaned up nicely

-
Day 14
Just sitting inside to stay warm today. I did venture to the driveway to take this pic of my pliers and pocket knife:

-
@nate j said:
These are the A.G. Russell Field Tweezers, but the same thing is also commonly sold as Uncle Bill’s Sliver Grippers.
@IMR4198 said:
I like the folding can openers. If you carry one on your keys or something, you might want to put a strip of tape to hold the blade closed. They open up and turn into a pocket and/or finger poker.I used a small rubber band for that purpose. I will have to see if I have another on hand.
@fullbreakfast said:
Looks good for another few decades.Sure does!
Is that an Estwing?@WECSOG said:
I also have a larger, thicker commercial version by Marbles, but I can't show that one because it has a spork built in...I have one of those, too. Unfortunately, I wasn't able to acquire a FRED (which that tool was based on) during either of my deployments.
@LoopCutter said:
Travel yesterday afternoon, through the snow and blowing cold temperatures to join mates for some CHRISTMAS CHEER and food and White Elephant gifting experience.Interesting book title. Was that the "white elephant gift?"
Day 14
I'll show a surprise box pull, too: the General 744 4-in-1 Mini.
[attach id=0 msg=2556058]
It may be seen in action in the second half of the challenge.
[attach id=1 msg=2556058]
.jpg)
.jpg)
-
Day 13:
Almost forgot.
Went with the Topo EAB (from Farmer X during the utility knife challenge) and the beefier of the Lisle two-pack of pocket prybars.
They're $15 for two (one small with a magnet, and one beefy as heck) at O'Reilly Auto Parts. They are Chinese, and it makes me wonder if Lisle simply just put the same ones that are like $2-3 each from Amazon in a Lisle package and doubled the price. Thus, I will likely order a few of those. I have a Snap-On (the only item I bought off the truck--during a chance encounter), and lose that thing regularly. My Mac ones (one of the few things I bought off that truck) got relegated to toolbox duty.
But, to be honest, I prefer the Snap-On handle... And they're American made. While not suitable for heavy prying, CAT has a small Snap-On screwdriver with pocket clip (and the same exact handle as the prybars) available through the dealer for $5.
[attach id=0 msg=2556065]

-
Day 14:
Used a tool to modify another tool.
I took some measurements with my cheap Pittsburgh calipers in order to input them into a vacuum nozzle tool on Makerworld.
I printed a blower attachment for a cheap Walmart inflator (bought to inflate the ring on a pool this summer, and then a couple of times with an air mattress) to clean dust and stuff out of the keyboard. While I'll be getting one of those rechargeable fan/blower tools (as D-cells aren't cheap) soon, this will do in the meantime. I'm also making a few different nozzles for dusting/cleaning.
[attach id=0 msg=2556066]

-
Day 15

-
<u>Day 14</u>
Apologies for the horrible focus on the picture. I took it before the sun went down and didn't bother to check it as I had to run in and start dinner.

Used a little knife that came with a knife lot I acquired a while a go. Just needed a quick strop and it was good to go. Used it to cut the last of the serranos off my plants before it freezes tonight.
-
Day 15

Pry bar was useful for getting dried mud out of the treads of these boots.
After I put them on I remembered the reason I have not worn them in several years is that they are badly designed and uncomfortable.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



