December 2025 Tool Box Challenge
-
Day 14
Buck, flashlight, and my patched together CASIO. I figured the band would fail and dump old faithful on the ground, but so far the watch band has held together. I might have to Opinel a while after this. We will see. Is Opinel a verb? It is now.I Opinel We Opinel
You Opinel You'all Opinel
He Opinels They Opinel
She Opinels
It Opinels
We won't use the archaic 'Thou Opinelst and 'Ye Opineleth'. Have to bring things up to date, right? If there are questions about other conjugations, I might or might not answer them. Depends.
Best wishes. G

[attach id=0 msg=2555989]
-
Day 14
Utica spear point folder
P-38 and P-51 rats openersThe P-38 is stamped "US Shelby Co" and the P-51 is just stamped "US."
I also have a larger, thicker commercial version by Marbles, but I can't show that one because it has a spork built in, which makes it a multi tool.

-
Day 14
Travel yesterday afternoon, through the snow and blowing cold temperatures to join mates for some CHRISTMAS CHEER and food and White Elephant gifting experience.
The HOSTESS, prepared a wide assortment of goodies,( I even got to bring some home!)
The HOST, set up bar service on top of the washer dryer in laundry room. His twist off craft beers were not twist off, and the Wine I brought had a cork in it and he could not located a cork removal tool to please the HOSTESS’s request to sample the contents!
Normally a SPARTAN, would have been in my kit, but I had at the last minute retrieved my substitutes for the travel adventure.
Then after the food some party games, that included a White Elephant gift exchange, trade, steal, and steal back and some pouting…
My final result was some excellent coffee table reading material.
[attach id=0 msg=2555999]
A shame we make ourselves wait a whole year to do again. (Unless we arrange a travel adventure before next holiday season!)
And, to conclude the evening I ventured home, on icey roads, snow covering black ice and single digit temps during the hour ‘n half trek, than normally takes a three quarters an hour for the 50 mile journey🫣
I did sleep in or was the later pillow time caused the petite interruption to adjust accordingly.

-
@fullbreakfast said:
Day 14
Steel wool, a good soak in de-rusting solution, more steel wool and a few drops of 3-in-1 oil.



Looks good for another few decades.
My boy is six now, maybe next Summer we'll go looking for fossils.
That cleaned up nicely

-
Day 14
Just sitting inside to stay warm today. I did venture to the driveway to take this pic of my pliers and pocket knife:

-
@nate j said:
These are the A.G. Russell Field Tweezers, but the same thing is also commonly sold as Uncle Bill’s Sliver Grippers.
@IMR4198 said:
I like the folding can openers. If you carry one on your keys or something, you might want to put a strip of tape to hold the blade closed. They open up and turn into a pocket and/or finger poker.I used a small rubber band for that purpose. I will have to see if I have another on hand.
@fullbreakfast said:
Looks good for another few decades.Sure does!
Is that an Estwing?@WECSOG said:
I also have a larger, thicker commercial version by Marbles, but I can't show that one because it has a spork built in...I have one of those, too. Unfortunately, I wasn't able to acquire a FRED (which that tool was based on) during either of my deployments.
@LoopCutter said:
Travel yesterday afternoon, through the snow and blowing cold temperatures to join mates for some CHRISTMAS CHEER and food and White Elephant gifting experience.Interesting book title. Was that the "white elephant gift?"
Day 14
I'll show a surprise box pull, too: the General 744 4-in-1 Mini.
[attach id=0 msg=2556058]
It may be seen in action in the second half of the challenge.
[attach id=1 msg=2556058]
.jpg)
.jpg)
-
Day 13:
Almost forgot.
Went with the Topo EAB (from Farmer X during the utility knife challenge) and the beefier of the Lisle two-pack of pocket prybars.
They're $15 for two (one small with a magnet, and one beefy as heck) at O'Reilly Auto Parts. They are Chinese, and it makes me wonder if Lisle simply just put the same ones that are like $2-3 each from Amazon in a Lisle package and doubled the price. Thus, I will likely order a few of those. I have a Snap-On (the only item I bought off the truck--during a chance encounter), and lose that thing regularly. My Mac ones (one of the few things I bought off that truck) got relegated to toolbox duty.
But, to be honest, I prefer the Snap-On handle... And they're American made. While not suitable for heavy prying, CAT has a small Snap-On screwdriver with pocket clip (and the same exact handle as the prybars) available through the dealer for $5.
[attach id=0 msg=2556065]

-
Day 14:
Used a tool to modify another tool.
I took some measurements with my cheap Pittsburgh calipers in order to input them into a vacuum nozzle tool on Makerworld.
I printed a blower attachment for a cheap Walmart inflator (bought to inflate the ring on a pool this summer, and then a couple of times with an air mattress) to clean dust and stuff out of the keyboard. While I'll be getting one of those rechargeable fan/blower tools (as D-cells aren't cheap) soon, this will do in the meantime. I'm also making a few different nozzles for dusting/cleaning.
[attach id=0 msg=2556066]

-
Day 15

-
<u>Day 14</u>
Apologies for the horrible focus on the picture. I took it before the sun went down and didn't bother to check it as I had to run in and start dinner.

Used a little knife that came with a knife lot I acquired a while a go. Just needed a quick strop and it was good to go. Used it to cut the last of the serranos off my plants before it freezes tonight.
-
Day 15

Pry bar was useful for getting dried mud out of the treads of these boots.
After I put them on I remembered the reason I have not worn them in several years is that they are badly designed and uncomfortable.
-
Day 15
An Opinel No. 8 in my pocket. I think that will be the knife carry for a while. So far, the pliers haven't really been used for anything. Or the screwdrivers. I might have to slow down on carrying either of them. Best wishes. G
[attach id=0 msg=2556082]
-
Day 15
Added a new tool to my kit!
[attach id=0 msg=2556098]
A toothpick alternative is required.
Did you know, as we age your teeth shift yet? Mine do! I thought these were permanent, nope!

-
Your Day 19 mini-challenge
FarmerX was kind enough to invite me to set the mini-challenge for this Friday, December 19.
The challenge is to post a picture of one of your single-use tools being used for a purpose for which it was not intended. Could be as simple as prying a paint tin lid with a screwdriver, but the only limit is your imagination as to what a tool can be used for.
A few notes:
-
The tool does not have to be part of your December EDC, but does have to be a tool you are allowed to carry under the rules of the challenge as set by Gary.
-
It is of course not a problem if multiple challengers hit on the same use case.
-
Bonus points for any original, amusing or just plain silly uses you can come up with. The use does not have to be a practical one!
I hope we all have a bit of fun with this.
-
-
Day 15
Using my homemade keyring bit driver to remove hardware from a scrapped cabinet. The wood from said cabinet is burning in the woodstove right now.

-
@LoopCutter said:
Day 13Had to tidy up tonight, party with friends is on the calendar and hopefully reachable as we are plunging into a deep freeze and it is now snowing.
Anywho, reached into my pouch and extracted the nail file to tidy up some rough edges before they snagged material and ripped back and become more troublesome.
The pouch
[attach id=0 msg=2555954]
And fileThat looks like a pretty nifty pouch LC. What make/model is it?
Day 7
The license plate format was changed in our province,and,by law,all plates have to be riveted to the frame.
I needed to tighten the pin guide gizmo on my riveter,my mini shifting and Knipex worked nicely .
[attach id=0 msg=2556121]
[attach id=1 msg=2556121]Day 8
I needed to fill my Zippo,I used the mini-pry to open the spout. I Can't recall using this tiny tool.
I always have a Bic on me [and 1 in my edc pouch] even though I'm using my Zippo.
[attach id=2 msg=2556121]
[attach id=3 msg=2556121]



-
Day 9
Summer is also Litchi [or Lychee] season here,1 of my kids brought some for us.
[attach id=0 msg=2556123]
[attach id=1 msg=2556123]

-
I had to look up the Lychee fruit. I see where Dan has passed on the mini-challenge baton. The early notice should give everyone plenty of time to figure out something to enter on Dec 19. Fullbreakfast will request someone to do the final mini-challenge which will be Dec 26. Should be some fun. Best wishes. Gary

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
