December 2025 Tool Box Challenge
-
Day 15
An Opinel No. 8 in my pocket. I think that will be the knife carry for a while. So far, the pliers haven't really been used for anything. Or the screwdrivers. I might have to slow down on carrying either of them. Best wishes. G
[attach id=0 msg=2556082]
-
Day 15
Added a new tool to my kit!
[attach id=0 msg=2556098]
A toothpick alternative is required.
Did you know, as we age your teeth shift yet? Mine do! I thought these were permanent, nope!

-
Your Day 19 mini-challenge
FarmerX was kind enough to invite me to set the mini-challenge for this Friday, December 19.
The challenge is to post a picture of one of your single-use tools being used for a purpose for which it was not intended. Could be as simple as prying a paint tin lid with a screwdriver, but the only limit is your imagination as to what a tool can be used for.
A few notes:
-
The tool does not have to be part of your December EDC, but does have to be a tool you are allowed to carry under the rules of the challenge as set by Gary.
-
It is of course not a problem if multiple challengers hit on the same use case.
-
Bonus points for any original, amusing or just plain silly uses you can come up with. The use does not have to be a practical one!
I hope we all have a bit of fun with this.
-
-
Day 15
Using my homemade keyring bit driver to remove hardware from a scrapped cabinet. The wood from said cabinet is burning in the woodstove right now.

-
@LoopCutter said:
Day 13Had to tidy up tonight, party with friends is on the calendar and hopefully reachable as we are plunging into a deep freeze and it is now snowing.
Anywho, reached into my pouch and extracted the nail file to tidy up some rough edges before they snagged material and ripped back and become more troublesome.
The pouch
[attach id=0 msg=2555954]
And fileThat looks like a pretty nifty pouch LC. What make/model is it?
Day 7
The license plate format was changed in our province,and,by law,all plates have to be riveted to the frame.
I needed to tighten the pin guide gizmo on my riveter,my mini shifting and Knipex worked nicely .
[attach id=0 msg=2556121]
[attach id=1 msg=2556121]Day 8
I needed to fill my Zippo,I used the mini-pry to open the spout. I Can't recall using this tiny tool.
I always have a Bic on me [and 1 in my edc pouch] even though I'm using my Zippo.
[attach id=2 msg=2556121]
[attach id=3 msg=2556121]



-
Day 9
Summer is also Litchi [or Lychee] season here,1 of my kids brought some for us.
[attach id=0 msg=2556123]
[attach id=1 msg=2556123]

-
I had to look up the Lychee fruit. I see where Dan has passed on the mini-challenge baton. The early notice should give everyone plenty of time to figure out something to enter on Dec 19. Fullbreakfast will request someone to do the final mini-challenge which will be Dec 26. Should be some fun. Best wishes. Gary

-
@Humayd A R Mahomedy said:
That looks like a pretty nifty pouch LC. What make/model is it?[attach id=0 msg=2556126]
VIPERADE. found it on Amazon. Bought originally to
Pack essentials and keep organized in a crossbody bag or waist bag I use for personal purposes.I employed this for the same reason for tools and this challenge. Makes it easy to shift items quickly from one bag or the other.
But will admit it is more compact with a BOND and a SAK Compact combined with my cash, gift cards, bandaids and such.
If I was going to carry a pouch with speciality tools. A book style with opposing zipper pulls and inside pockets may serve as a better option.

-
@IMR4198 said:
I had to look up the Lychee fruit. I see where Dan has passed on the mini-challenge baton. The early notice should give everyone plenty of time to figure out something to enter on Dec 19. Fullbreakfast will request someone to do the final mini-challenge which will be Dec 26. Should be some fun. Best wishes. Gary

When the crop is good,Litchis are really sweet,juicy and tasty. This year the crop was good,all the heart-shaped fruit had tiny seeds.
I'll definitely give the mini-challenge a shot. -
@LoopCutter said:
[attach id=0 msg=2556126]VIPERADE. found it on Amazon. Bought originally to
Pack essentials and keep organized in a crossbody bag or waist bag I use for personal purposes.I employed this for the same reason for tools and this challenge. Makes it easy to shift items quickly from one bag or the other.
But will admit it is more compact with a BOND and a SAK Compact combined with my cash, gift cards, bandaids and such.
If I was going to carry a pouch with speciality tools. A book style with opposing zipper pulls and inside pockets may serve as a better option.
Thanks LC

-
Day 14
This Tick Key rides along with my keys. Unfortunately, ticks are quite common where I live, and the Tick Key weighs almost nothing (made of aluminum), costs almost nothing, and is much more effective than tweezers at removing an embedded tick.
I haven’t needed it terribly often, but have used it a few times.

-
Day 15
This Olight I3 EOS has been riding on my keys for a while.
I usually have a larger primary light, but this comes in handy from time to time…
For example, last summer, I was in a stall in a public restroom, doing my business. The lights were on one of those motion sensors which turns the lights off when it doesn’t sense motion for a few minutes. This might seem like a great way to save electricity, but a problem became apparent when the lights shut off while I was still in the stall. No amount of waving from inside the stall would bring the lights back on, since the sensor couldn’t “see” it.
Now, when I say it was dark in that bathroom with the lights off, I don’t mean it was just dim, or only a little bit of light was visible. I mean it was deep in a cave, can’t see your hand in front of your face dark. As luck would have it, I didn’t have either a larger flashlight or my cell phone on my person at the moment, but I had my little Olight. And by its light, I was able to finish my business and exit the stall, which of course reactivated the bathroom lights.

-
That's why my office radio is always run on AC power.
@ReamerPunch said:
Day 15Interesting flashlight. Wuben doesn't seem to have any offerings that really appeal to me (meaning they use AA cells).

@fullbreakfast said:
Post a picture of one of your single-use tools being used for a purpose for which it was not intended.I have an idea for this, and I'll do a trial run soon. This oughta be good!
@Humayd A R Mahomedy said:
By law,all plates have to be riveted to the frame.So the plates have to be installed with rivets instead of screws? Do I understand that correctly? If so, that doesn't make much sense to me, especially since in Michigan license plates seem to stay with the previous owner when a vehicle is sold.
@nate j said:
This Tick Key rides along with my keys.That's an interesting little thing. Have you had occasion to test the tick removal tools in a Swiza or an outdoors Opinel?
Day 15
Two Gerber EABs (and some chocolate-covered raisins). I prefer the black one, as it shows the topo lines better. Note that the silver one has a Stanley blade and the black one has a DeWalt blade. I tested the two side-by-side at this time last year. For the sort of things I need a blade for, the DeWalt work better...in my opinion, anyway.
[attach id=0 msg=2556157]

-
@Farmer X said:
That's an interesting little thing. Have you had occasion to test the tick removal tools in a Swiza or an outdoors Opinel?I haven’t.
I don’t even own a Swiza.
I do have an Opinel No. 12 Explore, but it’s rare that I carry it, and even rarer that I do so with the removable tools installed.
-
-
Day 16
Taking apart a bed and moving it to a different room.

Lotsa screws, the Wiha electric driver is now my best friend on jobs like this.
The pry bar did one of its core tasks, getting out some stupid staples:

A few posts ago I mentioned that I am carrying a needle and thread, but did not expect to use them. Today I did use them! Needed to attach some lights to the bunny headboard and was able to put thread through the velvet to tie them on.

-
Day 16

-
@WECSOG said:
I've been doing the same this month, but with denatured alcohol. I usually use the bottle opener/ screwdriver of whatever SAK I'm carrying, but not this month.That's pretty cool man.
Zippo fluid,and a few other brands of lighter fluid, is easier to obtain here.
Does the denatured alcohol burn like lighter fluid?@Farmer X said:
That's why my office radio is always run on AC power.
Interesting flashlight. Wuben doesn't seem to have any offerings that really appeal to me (meaning they use AA cells).

I have an idea for this, and I'll do a trial run soon. This oughta be good!
So the plates have to be installed with rivets instead of screws? Do I understand that correctly? If so, that doesn't make much sense to me, especially since in Michigan license plates seem to stay with the previous owner when a vehicle is sold.
That's an interesting little thing. Have you had occasion to test the tick removal tools in a Swiza or an outdoors Opinel?Day 15
Two Gerber EABs (and some chocolate-covered raisins). I prefer the black one, as it shows the topo lines better. Note that the silver one has a Stanley blade and the black one has a DeWalt blade. I tested the two side-by-side at this time last year. For the sort of things I need a blade for, the DeWalt work better...in my opinion, anyway.
[attach id=0 msg=2556157]
The mounting frame/bracket is attached to the car [probably screwed iirc] and the plates have to be riveted to the frame,to prevent theft. Hijackers [you'd call them carjackers] and cash in transit robbers [armored car robbers] always use stolen cars for their capers,sometimes switching the plates [I don't know if they still steal plates]. In the CIT heists,the armored vehicle is usually blown up using commercial explosives,if it's on the road,or the thieves can't access it any other way. There was a time when ATM bombings were common as well. Less now.
The registrations are re-used,or used to be. I don't know if that will continue with the new system.
When the car is sold,the registration no goes with the car,unless it's a vanity plate,in that case the owner will keep it.
I don't know if the system has changed,I didn't go through this process in a while.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

