December 2025 Tool Box Challenge
-
Day 16
Taking apart a bed and moving it to a different room.

Lotsa screws, the Wiha electric driver is now my best friend on jobs like this.
The pry bar did one of its core tasks, getting out some stupid staples:

A few posts ago I mentioned that I am carrying a needle and thread, but did not expect to use them. Today I did use them! Needed to attach some lights to the bunny headboard and was able to put thread through the velvet to tie them on.

-
Day 16

-
@WECSOG said:
I've been doing the same this month, but with denatured alcohol. I usually use the bottle opener/ screwdriver of whatever SAK I'm carrying, but not this month.That's pretty cool man.
Zippo fluid,and a few other brands of lighter fluid, is easier to obtain here.
Does the denatured alcohol burn like lighter fluid?@Farmer X said:
That's why my office radio is always run on AC power.
Interesting flashlight. Wuben doesn't seem to have any offerings that really appeal to me (meaning they use AA cells).

I have an idea for this, and I'll do a trial run soon. This oughta be good!
So the plates have to be installed with rivets instead of screws? Do I understand that correctly? If so, that doesn't make much sense to me, especially since in Michigan license plates seem to stay with the previous owner when a vehicle is sold.
That's an interesting little thing. Have you had occasion to test the tick removal tools in a Swiza or an outdoors Opinel?Day 15
Two Gerber EABs (and some chocolate-covered raisins). I prefer the black one, as it shows the topo lines better. Note that the silver one has a Stanley blade and the black one has a DeWalt blade. I tested the two side-by-side at this time last year. For the sort of things I need a blade for, the DeWalt work better...in my opinion, anyway.
[attach id=0 msg=2556157]
The mounting frame/bracket is attached to the car [probably screwed iirc] and the plates have to be riveted to the frame,to prevent theft. Hijackers [you'd call them carjackers] and cash in transit robbers [armored car robbers] always use stolen cars for their capers,sometimes switching the plates [I don't know if they still steal plates]. In the CIT heists,the armored vehicle is usually blown up using commercial explosives,if it's on the road,or the thieves can't access it any other way. There was a time when ATM bombings were common as well. Less now.
The registrations are re-used,or used to be. I don't know if that will continue with the new system.
When the car is sold,the registration no goes with the car,unless it's a vanity plate,in that case the owner will keep it.
I don't know if the system has changed,I didn't go through this process in a while. -
Day 16
Opinel 8 with my branch cutter/walking staff. The lopping tool needs a good sharpening. I bought the silly thing years ago at a flea market for $2. I have a saw blade for this sort of tool, but like the lighter weight and portability of it without the blade. I used the Opinel to slice up some corrugated boxes. Best wishes. G
[attach id=0 msg=2556182]
-
The little Gerber AA flashlight is in the tool photo. Also in my pocket. I run this thing on batteries that have lost enough zip that they won't work an outdoor camera. Still last a long time in a flashlight. The switch on this thing is balky. It works, but you have to futz around with it. I have two cheap 2AA flashlights that are used daily. I lost one and it hasn't turned up in a couple of pretty intensive searches. That was the best one, of course. The other has a balky switch as well. Shake it. Screw the lens piece on and off. It works, but it is troublesome. The better one is still in the house somewhere.
I had some better flashlights, but they all went belly up and floated to the top of the tank. Since then, I have just bought cheapies. I need to get a better look at alternatives from W-Mart. Small and rechargeable would be preferred. Oh well.
Best wishes,
Gary

-
I started thinking about how good some biscuits would be on a cold day like today. Next thing I knew, there were some in the oven. Evidently the biscuit baking center of my 40 Watt brain took over guidance of necessary body functions. Turned out that I had more dough than pan, so I had to squoze some in there. They came out fine anyway. Full disclosure. No multi-tools were used in the preparation of this bakery item.
Best wishes. G
:ahhh
[attach id=0 msg=2556185]
-
@Humayd A R Mahomedy said:
That's pretty cool man.
Zippo fluid,and a few other brands of lighter fluid, is easier to obtain here.
Does the denatured alcohol burn like lighter fluid?Not really. Alcohol is less volatile; lighter fluid is closer to petrol. In fact I have used plain old automotive petrol in my Zippos. I've made alcohol work too, but it has to be warm.
Alcohol is good for burning in a small can, for cooking or heating water. Lighter fluid or petrol burns way too fast for that.
-
Day 16
Denatured alcohol burning in a small food (potted meat) can.
Hart mini prybar I used to open the cap on the alcohol.
No-fuel electronic lighter that I used to light the alcohol.
Rough Ryder RR1976 Trapper.
-
Day 16
My kit this TUESDAY!
[attach id=0 msg=2556238]

-
Day 16
I keep my keys (and associated little tools) on a Black Diamond Miniwire carabiner. It’s the smallest carabiner Black Diamond makes, but is a real climbing/load-rated carabiner (not just a cheap key ring).

-
@Humayd A R Mahomedy said:
The mounting frame/bracket is attached to the car [probably screwed iirc] and the plates have to be riveted to the frame,to prevent theft.That makes sense.
@IMR4198 said:
I need to get a better look at alternatives from W-Mart. Small and rechargeable would be preferred. Oh well.I have no idea what Wal-Mart offers in that regard, but you have scads of good options available in general.
@LoopCutter said:
My kit this TUESDAY!Beautiful bones on that 75!

Day 16
My "at-home carry" lately has been the sage green No. 6. Today I used it to break into a jar of instant coffee.
[attach id=0 msg=2556268]
[attach id=1 msg=2556268]
.jpg)
.jpg)
-
-
Day 17

-
@ReamerPunch said:
Day 17I had a look at Harnds knives and they seem like good value if the quality is there. How are you finding it?
-
I like it. I got it for the Orange Challenge a while back. I am happy with it for what I paid (around $40 AUD I think). It is thin so rides well in a pocket, ergonomics are fine, it holds an edge, opens reliably. The blade is a little big, so I don't carry it as often anymore.
-
Day 17
Opinel No. 08 on a little walk. I saw a bobcat track in the mud with a coyote track on top of most of it. There was a small deer track within about 6 inches of the both of them. If I can find some relatively economical batteries, I will have a good location to place a camera. The store where I usually find them on sale has removed their display and 90% of the batteries. What few dregs remain are expensive.
Best wishes, G

[attach id=0 msg=2556299]
-
@ReamerPunch said:
I like it. I got it for the Orange Challenge a while back. I am happy with it for what I paid (around $40 AUD I think). It is thin so rides well in a pocket, ergonomics are fine, it holds an edge, opens reliably. The blade is a little big, so I don't carry it as often anymore.Thanks, good to know.
-
Day 17
Ripping out carpet.

The mini pry bar helped a little, but the bigger Hultafors bar did most of the hard work - prising up those horrible gripper strips, and the 200 staples that were left behind when I tore out the underlay.
With carpet gone, another bed was taken apart and re-assembled in this room:

This tiny spanner was the tool that saved me here, as I had to tighten a couple of bolts in an extremely small space. Which supports my view that if you see a tool that you think might come in handy one day, and price is not an issue, you should get it. That spanner sat unused in my tool bag for years, but now came its chance to shine.
It certainly beats buying a tool because you just had a job where you needed it, and great frustration ensued because you did not have it. An experience I have had many times. The only thing more frustrating is knowing the exact tool you need, knowing you have it, but not being able to find it. Another experience I am no stranger to.
-
There have been several small adjustables in this challenge so far. I carried one for a day but didn't use it. Little 4 inch IREGA. Bought it at a flea market for $1 since it was cute. It stays on my bench, and I use it now and then. Best wishes. G

[attach id=0 msg=2556306]
-
@IMR4198 said:
There have been several small adjustables in this challenge so far. I carried one for a day but didn't use it. Little 4 inch IREGA. Bought it at a flea market for $1 since it was cute. It stays on my bench, and I use it now and then. Best wishes. G

That one I used is an Irega also. Seems a good little tool, so far.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
