December 2025 Tool Box Challenge
-
@Barry Rowland said:
This looks like a great challenge!It sure is. Perhaps I'll see you in a future run!
@LoopCutter said:
A quiet day at home.Always a good thing!
@AzteCypher said:
Also posting a shot of the canoe because it looks real sharp in my opinion.
@ReamerPunch said:
711L mini ratchet. I've reviewed it in the Mini Ratchet review marathon
@WECSOG said:
I dug around and found a Mag Solitaire. It's not one of the Camel branded ones, but I've still had it for years.The lanyard on my Solitaire disappeared long ago. I guess that Camel promotion ran after I picked up the habit. I never did anything with all that Camel Cash. Maybe I should have, as I used to smoke like a two-stroke Diesel. And I like the Mercator!
Day 22
A couple of Case Knives: a 6.5225 1/2 from 2022 and a 6254 from 1978 (my birth year). I've never determined if the 6254 is bone or jigged Delrin. Case would have done well to use different designators for those cover materials...and not polishing their stainless blades so heavily.
[attach id=0 msg=2556884]
I also switched the "at-home carry." The olivewood No. 6 at the top is filling that role. At the bottom is a safe queen. The Rubik's Cube is included in the photo because I've been farting around with it a lot lately.
[attach id=1 msg=2556884]
Tomorrow y'awl will see some tools that were in the USPS system yesterday.
.jpg)
.jpg)
-
Day 19:
I dug out my old Jakks Pacific Atari emulator from the mid '00s. It was bought as I didn't know how to get my Dad's old Tele-Games Sears Atari working properly (it's still around here--hoping I can find it). The batteries have corroded badly inside, and it's probably toast.
Tools used--every PH1 I had in the basement until I found one that worked (Master Mechanic PH1--others are '00s USA Xcelite and '90s Popular Mechanics USA). In January, I'm replacing my hodgepodge mess down here with either Icon or CAT/Williams. Depends on what sales Harbor Freight is running--and the CAT dealer occasionally has big parts specials that include tools.
That being said, an antique store near my house has a 2600 cheap--and a comic book store here locally has good prices on some older consoles (just not anything Nintendo...).
[attach id=0 msg=2556893]

-
Day 20:
Rigid RG-24 (full serrated--and cuts great) and Crescent 6" linesman's pliers.
Not sure how old these pliers are. The pair that I had lost at the time (but later found) had engraved markings--yet these are stamped. Good thing about getting a replacement--cutters are still good.
The Ridgid is from the '90s. I got it new old stock for like $20 a few years ago. It's every bit as good quality as Spyderco (guessing probably a Hiro or Sakai product--both OEMs that have made certain Spyderco models in the past--but also made tons of low-cost brands in the '80s and '90s). There's just something about the myriad of Japanese knives in the '70s and '80s. They're good knives that weren't expensive knife, and still aren't today.
I used to hate the fact the knife sits high, but it's easier to pull out of my pocket with my gloves on.
[attach id=0 msg=2556894]

-
Day 21:
The old fridge was worn out, and taking more time to keep cool. So, when my grandmother and I went to Lowe's to buy a dryer, we found this LG at a deep discount.
Only thing I don't like--it's designed for IOT, and can connect to an app. But, for $1500 down from $3200, it was decent.
Used my ADC Mini Medicut shears and Byrd Robin 2 Wharncliffe full serrated (traded a worn-out Harpy for it at a local Spyderco dealer). The Byrd is my lawn mowing knife, as it cuts through branches that whack me in the face easily (and like a laser), but fits in cheap shorts. In the winter, it's a twine knife.
PS: I did accidentally cheat today. I was helping the delivery guys rip out the old dryer, and the vent hose was hanging up. I cut through the spring steel with the Ozark Trail Multiforce that lives in my coat.
[attach id=0 msg=2556895]

-
@Farmer X said:
I used to smoke like a two-stroke Diesel. And I like the Mercator!Day 22
A couple of Case Knives: a 6.5225 1/2 from 2022 and a 6254 from 1978 (my birth year). I've never determined if the 6254 is bone or jigged Delrin.
A buddy of mine used to joke that Harley should offer their own brand of cigarette: filterless and infused with 60 weight motor oil to make you cough out blue smoke and sound like a worn out old Panhead! :D
That's a good looking 6254. I have one in red bone that my Dad gave me back in the '70s.
-
-
Day 23
Guinea Bissau came!


-
Day 23
Taking an old cupboard off the wall.

It was dark in that cupboard, and to start with I thought whoever put it on the wall had cammed out some of the screw heads. Then I brought better light to bear and realised three of the four screws were PZ3, not PZ2, which was why I wasn’t getting traction. As luck would have it the first one I tackled had fit the PZ2 I had loaded, but the others were different.
-
Carrying a multi-tool on your person as a backup is a fail. Nobody can control what you have in your house or desk. You don't have to bury your multi tools in the back yard or put them in a box on the sidewalk marked "Free". I would expect anyone who uses a multi or SAK during the challenge to bow out. This is a challenge, and a challenge should be challenging.
Best wishes. Gary

-
Oh, you're a mean one Mr. IMR,
That's just the way you are,
Your challenge full of spider bites,
Your rules a mucky marsh.
IMRRRRRR.
Your brain is an overage collection
Of moths and musty must,
You're pompous in your pomposity,
Your challenge is just rust.Day 23
I get to be Grinch today. How about a photo? Best wishes. G
[attach id=0 msg=2556913].jpg)
-
.
-
@ReamerPunch said:
Guinea Bissau came!
I used to collect coins when I was a kid. Still have most of them stashed away. Might be time to consider a cool wall display for them.
I'm told I'm quite often that I'm a grinch or at least that I look like one.
-
-
@ReamerPunch said:
You're safe.
Was the ratchet Lyman branded?No. It was made by Chapman Mfg. Co of Durham, Connecticut.
Actually I just realized that I was replying to the wrong post. Gary is the one with a mini ratchet similar to mine.
-
Day 23
Top: Chapman mini ratchet from my 40 year old, orange Lyman 450.
Next, the ratchet from a much newer, gray Lyman 450. I assume it's newer because it looks newer, but I got it from an estate sale so I'm not sure as to its age. Who knows, the ratchet may be a newer replacement. I gotta say I prefer the old Chapman because it has proven itself through years of service, and also because the newer one has a direction switch which is superfluous because you can reverse it by simply flipping it over. The direction switch on the new one is probably what will fail and turn it into scrap.
Below that is a Sure Bilt mini ratchet. It's pretty nice. Not pictured, I have another mini ratchet that is the same size but even nicer. I elected not to include that one because it has the 1/4 inch female drive for driver bits on one side, a a 1/4 inch male drive on the other side so it can drive sockets without having to use an adapter. I really like that feature, but it could be considered a multi.
The knife is a carbon steel Joker, from Spain. I have two of these. This is my newer one, with Bubinga wood scales. My older one has olive wood scales. They're great for cutting food because they don't have a nail nick to catch cheese or whatever.
And of course, my Visegrips.

-
@cody6268 said:
There's just something about the myriad of Japanese knives in the '70s and '80s. They're good knives that weren't expensive knife, and still aren't today.Good quality at low price is always a win!
@WECSOG said:
That's a good looking 6254. I have one in red bone that my Dad gave me back in the '70s.
I hope to see your red bone 6254 as well!@ReamerPunch said:
Guinea Bissau came!
That pole saw jogged my memory. I had an electric chainsaw that could be used in the conventional manner or attached to a pole. Unfortunately, it wasn't a great tool. I no longer have a need for such a thing anyway.
@AzteCypher said:
Ended up dozing off before I could post last night.I've had that happen more than I care to admit. At this time last year, I was so sick that I had almost no energy.
Day 23
Here are the tools that were in the USPS system until yesterday evening. I'd been thinking about getting one of the mini pry bars, so a
to ToolJoe for sending them my way! The CountyComm sticker will be seen again.[attach id=0 msg=2556973]
<u>FULL DISCLOSURE</u>
The package from ToolJoe did contain a multi-function tool that has been posted in an appropriate forum. In my defense, I didn't know the exact contents of the package, it probably wasn't a wise idea to leave anything in the package, and the multi-function tool will not be used or carried until next week.

-
Top is a premium, semi-custom light by Emisar. It is solid copper, has 4 LEDs that are 1750K color temperature which is about the same as the old Edison bulbs. Very warm light. It uses the open source Anduril control program, which allows you to set the programming how you want it. I have mine set as a continuous ramp from moonlight to turbo, with memory so it returns to the last used setting when you switch it on.
This is my bedside light. I keep it at the moonlight (lowest) level. Very dim, but bright enough to allow me to navigate through a dark house without affecting my night vision. Tactically good too, because someone in another room would probably not notice it. But by just pressing and holding the switch, it ramps up to full turbo mode or anywhere in between; wherever it is when I release the switch. It's not super bright at full power; maybe 200-300 lumens. Probably single-digit lumens in moonlight mode.
It also has an amber colored backlight in the switch, and a ring of tiny red LEDs around the perimeter of the beam. Those red LEDs and the switch backlight are very dim and very easy on the eyes in darkness. They don't grab your attention unless you are looking for them; dimmer than the backlight on a watch. In a lighted room you can't even see them unless you hold it right in front of your face. These are powered on any time the flashlight is off. But they only use microwatts so battery drain is not a problem. I use this light daily, but only have to charge it every two or three months.
Those are some really useful features on the Emisar. I have not run across the brand before, but will investigate further!
-
@fullbreakfast said:
Those are some really useful features on the Emisar. I have not run across the brand before, but will investigate further!You can get them here: https://intl-outdoor.com/ and there is a forum for them on Reddit at r/Hanklights.
-
I feel like I should confess my sins. There have been a couple, though I hope they are of the venial kind.
Last time I went into London, I picked up my “smart wallet” and put it in my bag. I had forgotten that inside it was an Alox Classic. I realised this later in the day when I went into the wallet to get a credit card that was in the same section. The Classic was not used, or touched - except that when I got home, I removed it from the wallet and took it to a place of confinement.
Earlier in the month I received SAK that I had ordered in November. I opened the package and examined the knife briefly to ensure I had been sent the correct item. It was then taken to a place of confinement. There was no gratuitous eyeballing, and no implements were fondled.
-
@WECSOG said:
You can get them here: https://intl-outdoor.com/ and there is a forum for them on Reddit at r/Hanklights.Thanks, I’ll check those out.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

